Bedienungsanleitung Clarion CX501 (Seite 25 von 37) (Englisch)

580423

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English

25 CX501

Operations Common to Each Mode

● Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ROTARY] knob.

3-2. Press the [x] or [v] button to select the

hour or the minute.

3-3. Turn the [ROTARY] knob to set the correct

time.

∗ The clock is displayed in 12-hour format.

3-4. Press the [ROTARY] knob to store the time

into memory.

Note:

• You cannot set the clock when it is displayed

with only the ignition on. If you drain or remove

the car’s battery or take out this unit, the clock is

reset. While setting the clock, if another button or

operation is selected, the clock set mode is

canceled.

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”.

(Adjustment level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Turn the [ROTARY] knob to adjust the

contrast.

● Setting the button illumination

2-1. Select “COLOR”.

3-1. Turn the [ROTARY] knob to select the

color type.

• Setting COLOR SCAN mode

As selecting “COLOR SCAN”, the color

automatically changes.

∗ The factory default setting is “COLOR SCAN”.

∗ After 3 seconds the color changes to the other.

• Setting USER mode

The factory default setting is “RED 8” (red),

“GREEN 8” (green), “BLUE 8” (blue).

As selecting “USER COLOR 1, 2, 3”, press the

[ROTARY] knob to enter the setting.

1. Press the [x] or [v] to select “RED”,

“GREEN” or “BLUE”.

2. Turn the [ROTARY] knob to select from

0 to 8.

3. Press and hold the [ROTARY] knob for 2

seconds or longer to store the color in

memory and cancel the setting mode.

● Setting the anti-theft function

(CATS)

“CATS” is the acronym of “Clarion Anti-Theft

System”. When you set a PIN code (called as

“Personal Code”), a theft is prevented by

disabling the operation of the unit at the theft.

• Setting your Personal Code

2-1. Select “CODE”.

3-1. Press the [ROTARY] knob.

The set personal code screen appears.

4-1. Press the [DIRECT] buttons [1]-[6] to enter

your desired 4-digit Personal Code.

5-1. Press and hold the [ROTARY] knob

(2 sec.).

The entered Personal Code will be set, and

it will return to the previous screen.

Note:

• Write down your Personal Code in case you

forget it.

•

Erasing the Personal Code

2-1. Select “CODE”.

3-1. Press the [ROTARY] knob.

The ERASE PERSONAL CODE screen

appears.

4-1. Enter the Personal Code currently.

5-1. Press and hold the [ROTARY] knob (2

sec.) or longer.

Entering a Personal Code mode is

cancelled.

To change adjustment setting

1. Press and hold the [DISP] button (1 sec.)

to switch to the adjustment selection

display.

2. Press the [x] or [v] button to select

the “item name”.

“CLOCK” ↔ “CONTRAST” ↔

“COLOR” ↔ “CODE” ↔ “SCRN SVR” ↔

“SCROLL” ↔ “DIMMER” ↔

“BLINKLED” ↔ “INT-SW” ↔ “RESET”

3. Turn the [ROTARY] knob to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [ROTARY] knob to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

CX501_ENG.book Page 25 Thursday, November 4, 2010 3:55 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CX501 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info