Bedienungsanleitung Clarion CX501E (Seite 11 von 32) (Englisch)

473621

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English

11 CX501E

Radio Operations

Listening to the radio

1. Press the [SOURCE] button and select the

radio mode. The frequency or PS and PTY

appears in the display.

∗ PS: Programme service name

∗ PTY: Programme type

2. Press the [BAND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the

following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜

FM1...

Tuning

3 types of tuning mode available, seek tuning,

manual tuning and preset tuning.

Seek tuning

2 types of seek tuning: DX SEEK and LOCAL

SEEK.

DX SEEK can automatically tune in to

receivable broadcast stations; LOCAL SEEK

can tune in to only broadcast stations with a

good reception sensitivity.

Press and hold the [DISP] button (1 sec.) on the

front panel, then press [v] button repeatedly

until LO or DX displays on the screen, and

rotate the knob to select Local or Distant mode.

∗ If “TA” is lit in the display, TP stations are

automatically sought.

● DX SEEK

Press and hold the [x] or [v] button (1 sec.)

to automatically seek a station.

When the [v] button is pressed, the station is

sought in the direction of higher frequencies; if

the [x] button is pressed, the station is sought

in the direction of lower frequencies.

● LOCAL SEEK

If the [x] or [v] button is pressed and held

in position for 1 second or longer, local seek

tuning will be enabled. Broadcast stations with

good reception sensitivity are selected.

Manual tuning

Press the [x] or [v] button to manually tune

a station.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2,

6-FM3, 6-AM) exists to store individual radio

stations in memory. Press the corresponding

[DIRECT] button to recall the stored radio

frequency automatically.

Manual memory

1. Select the desired station with seek tuning or

manual tuning.

2. Press and hold one of the [DIRECT] buttons

(2 sec.) to store the current station into

preset memory.

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

1. Press the [BAND] button and select the

desired band (FM or AM (MW/LW)).

2. Press and hold the [ ] button (2 sec.). The

stations with good reception are stored

automatically to the preset channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [ ] button.

2. When a desired station is tuned in, press the

[ ] button again to continue receiving that

station.

Note:

• Be careful not to press and hold the [ ] button

(2 sec.), otherwise the auto store function is

engaged and the unit starts storing stations.

CX501E_EN.book Page 11 Thursday, November 11, 2010 1:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CX501E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CX501E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info