Bedienungsanleitung Clarion CX609E (Seite 22 von 34) (Englisch)

580506

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

22 CX609E

Operations Common to Each Mode

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”.

(Adjustment level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Press the [w] or [z] button to adjust the

contrast.

● Displaying the settings

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [w] or [z] button to display the

state of current settings.

∗ When the setting is selected, after 1 second

the current state will be displayed.

● Setting the button illumination

2-1. Select “COLOR”.

3-1. Press the [w] or [z] button to select the

color type.

• Setting COLOR SCAN mode

As selecting “COLOR SCAN”, the color

automatically changes.

∗ The factory default setting is “COLOR SCAN”.

∗ After 3 seconds the color changes to the other.

•

Setting USER mode

The factory default setting is “RED 8” (red),

“GREEN 8” (green), “BLUE 8” (blue).

As selecting “USER COLOR 1, 2, 3”, press the

[ ] button to enter the setting.

1. Press the [x] or [v] to select “RED”,

“GREEN” or “BLUE”.

2. Press the [w] or [z] button to select from 0

to 8.

3. Press and hold the [ ] button for 2 seconds

or longer to store the color in memory and

cancel the setting mode.

● Setting the anti-theft function

(CATS)

“CATS” is the acronym of “Clarion Anti-Theft

System”. When you set a PIN code (called as

“Personal Code”), a theft is prevented by

disabling the operation of the unit at the theft.

• Setting your Personal Code

2-1. Select “CODE”.

3-1. Press the [ ] button.

The set personal code screen appears.

4-1. Press the [DIRECT] buttons [1]-[6] to enter

your desired 4-digit Personal Code.

5-1. Press and hold the [ ] button (2 sec.)

The entered Personal Code will be set, and

it will return to the previous screen.

Note:

• Write down your Personal Code in case you

forget it.

•

Erasing the Personal Code

2-1. Select “CODE”.

3-1. Press the [ ] button.

The ERASE PERSONAL CODE screen

appears.

4-1. Enter the Personal Code currently.

5-1. Press and hold the [ ] button (2 sec.) or

longer.

Enter a Personal Code mode is cancelled.

• When the ENTER PERSONAL

CODE screen appears

The ENTER PERSONAL CODE screen will be

displayed when turning the ACC power on after

performing the following operations:

• The car battery was replaced.

• The backup power was cut off.

• The [RESET] button was pressed.

To change adjustment setting

1. Press and hold the [DISP] button (1 sec.)

to switch to the adjustment selection

display.

2. Press the [x] or [v] button to select

the “item name”.

“CONTRAST” ↔ “SETTINGS” ↔

“COLOR” ↔ “CODE” ↔ “SCRN SVR” ↔

“MESSAGE INPUT” ↔ “SCROLL” ↔

“DIMMER” ↔ “BLINKLED” ↔

“A-CANCEL” ↔ “INT-SW” ↔ “REAR/

S-W” ↔ “SYSTEM CHECK”

3. Press the [w] or [z] button to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

For example: after 1 second:

CX609E_EN.book Page 22 Monday, January 19, 2009 4:28 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CX609E Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CX609E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info