Bedienungsanleitung Clarion CZ102 (Seite 9 von 16) (Englisch)

580428

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

CDIMP3/WMA Operations

Other various play functions

Scan play

This function allows you to locate and play the

first 1 0

seconds

of all the tracks recorded on a

disc.

Press the [

1 ] button

perform scan play.

Repeat play

This

function

allows

you

play

the

current

track repeatedly or play a track currently being

played

the MP3/WMA folderrepeatedly.

CD:

1 . Press the [ 2 ] button once or more until

"APT

ON" appears on the LCD to perform repeat

play.

Press

[ 2 ]

button

repeatedly

until

"APT

OFF"

appears on the LCD

cancel

repeat

playback.

AUX

Operations

Press [SAC I (!) ] button on the panel or remote

control to

select

"AUX".

AUX is just for audio content with 3.5mm Jack

connector plugged into audio-in

socket

on the

front panel.

AUX

Input sensitivity setting

Press and hold the

[DISP]

button

sec.).

Turn

the

[VOLUME]

knob

select

"AUX

SENS".

the

output

level

connected

external

audio

player

is "HIGH",

rotate

[VOLUME]

knob

and

choose

"LOW".

And

the

output

level is

"LOW",

choose

"HIGH".

MP3/WMA:

1 . Press the [ 2 ] button once

more until

"TRACK

RPT' appears on the display to

perform repeat play, and

"RPT'

segment

lights on.

For

MP3/WMA

files,

press

[ 2 )

button

repeatedly until "FOLDER RPT'

appears

on the display

forfolder

repeat play.

Press [ 2 ]

button

repeatedly

until

"RPT

OFF"

appears

the

display

cancel

repeat playback, and

"RPT'

segment goes

off.

Random play

This

function

allows

you

play

all

tracks

recorded

a disc

a random order.

Press

the

[ 3 ]

button

perform

random

play.

GENERAL

Problem

Unit can not

power

on.

Unit

can

not

power

on.

Nothing happens

when buttons

are

pressed.

Display

not

accurate.

Remote control

does not work.

No/low audio

output.

Poor sound quality

or distortion.

Tel-Mute

malfunction.

Unit resets itself

when engine

off.

Cause

Measure

Unit fuse blown.

Replace with new fuse of correct rating.

Car battery fuse blown.

Replace with new fuse of correct rating.

Turn

off the power

and

remove the

DCP.

Press the [RESET] button with a thin rod.

Note:

The microprocessor has

When the

[RESET] button

pressed, turn off

malfunctioned due to noise, etc.

the

ACC

power.*

*When the

[RESET] button

pressed,

frequencies of radio stations, titles, etc. stored

memory

are

cleared.

Battery depleted.

Change the battery.

Battery installed incorrectly.

Install the battery correctly.

Improper audio output connection.

Check wiring

and

correct.

Volume set too

low.

Increase volume level.

Speakers damaged. Replace speakers.

Heavily biased volume balance. Adjust the channel balance

center position.

Speaker wiring

contact with

Insulate

all

speaker wiring connections.

metal part of

car.

Non-standard disc used. Use a standard disc.

Speaker power rating does not

Replace speakers.

match unit.

Wrong connections.

Check wiring

and

correct.

Speaker

shorted. Check wiring

and

correct.

MUTE wire

grounded. Check the MUTE wiring

and

correct.

Incorrect connection between

Check wiring

and

correct.

ACC

and

Battery.

CZ102

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ102 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info