Bedienungsanleitung Clarion CZ104E (Seite 7 von 15) (Englisch)

580507

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

English

CZ104E

Select tuner as playing source

Press [SRC / ] button once or more to

enter RADIO mode.

Selecting the radio band

Press the [AS/BAND] button to select one

radio band among FM1, FM2, FM3, MW

and LW .

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [

] or [ ] button to tune in

a higher / lower station.

Auto tuning

Press and hold the [ ] or [ ] button

to seek a higher / lower station.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a station is received, searching stops

and the station is played.

Auto store

Only stations with sufcient signal strength

will be detected and stored in the memory.

Press and hold the [AS/BAND] button (1

sec.) to start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 5 bands, such as FM1, FM2,

FM3, MW and LW. FM3, MW and LW

can store by AS function. Each band can

store 6 stations, CZ104E can store 30

stations in total.

Manual store

When one expected radio station has been

detected, press and hold number button 1-6

to store it in the memory.

Radio Operations

Recall the stored stations

Press one numeric button among 1 to 6 on

the panel to select the corresponding stored

station.

Local seeking

When LOCAL seeking is ON, only those

radio stations with strong radio signal could

be received.

To select LOCAL function, press and hold

the [ DISP ] button, then press [

] button

repeatedly until LO or DX displays on the

screen, and rotate the [VOLUME] knob to

select Local or DX mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

Radio Operations

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast

stations transmitting “Radio Data System”

data.

When using the “Radio Data System”

function, always set the radio to FM mode.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is ON.

1. Set to system setup by long pressing

[DISP] button.

2. Press the [ ] or [ ] button to select

“AF”.

3. Rotate the [VOLUME] knob to select ON

or OFF.

• AF ON:

“ AF” indicator appears in the display and

AF function turns on.

• AF OFF:

“ AF” indicator disappears in the display

and AF function turns off.

Setting the TA standby mode

If you press and hold the [TA] button, “TA”

lights in the display and the unit is set into the

TA standby mode until a trafc announcement

is broadcast. When a traffic announcement

broadcast starts, “TRAF INF” appears in the

display. If you press and hold the [TA] button

while a trafc announcement broadcast is being

received, the traffic announcement broadcast

reception is cancelled and the unit goes into the

TA standby mode.

Cancelling the TA standby mode

As “TA” lights in the display, press and hold the

[TA] button. The “TA” in the display goes off

and the TA standby mode is cancelled.

PTY (Programme Type) Select

This function enables you to listen to a

broadcast of the selected programme type.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station has

priority over a PTY broadcast station.

Selecting PTY

At Radio mode, press [MENU ] button, then

rotate the [VOLUME] knob to select PTY type,

press the [VOLUME] knob, the unit begin

searching.

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for

that region is received.

* The factory default setting is ON.

Notes:

• This function is disabled when a national

station such as BBC R2 is being received.

• The REG function ON/OFF setting is valid

when the AF function is ON.

1. Set to system setup by long pressing [DISP]

button.

2. Press the [

] or [ ] button to select

“REG”.

3. Rotate the [VOLUME] knob to select ON or

OFF.

Manually tuning a regional station

in the same network

This function is valid when the AF function is

ON and the REG function is OFF.

Manually tuning a regional station

in the same network

This function is valid when the AF function is

ON and the REG function is OFF.

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trafc Announcement)

In the TA standby mode, when a trafc

announcement broadcast starts, the trafc

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Trafc programme (TP)

automatic tuning is also available.

* This function can only be used when “TP”

appears in the display. When “TP” appears,

this means that the “Radio Data System”

broadcast station being received has traffic

announcement programmes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ104E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ104E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info