Bedienungsanleitung Clarion CZ209 (Seite 9 von 23) (Englisch)

580439

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English

9 CZ209

Sound Adjustment

Sound effects and tone can be adjusted as

desired.

● Setting the Z-Enhancer Plus

This unit has 4 sound tone effects stored in

memory.

Select the effect you prefer.

∗ The factory default setting is “OFF”.

2-1. Select “Z-EHCR+”.

3-1. When you turn the [ROTARY] knob, the

tone effect changes as follows:

“OFF” ↔ “B-BOOST” ↔ “IMPACT” ↔

“EXCITE” ↔ “CUSTOM”

OFF : No sound effect

B-BOOST : Enhanced bass

IMPACT : Enhanced bass and treble

EXCITE : Enhanced bass, mid, and

treble

CUSTOM : User customized

When set to “B-BOOST/IMPACT/EXCITE”:

3-2. Press the [ ] button.

3-3. Turn the [ROTARY] knob to adjust the

setting (Setting range:

–3 to +3).

∗ The factory default setting is “0”.

3-4. Press the [ ] button to return to the

previous mode.

When set to “CUSTOM”:

3-2. Press and hold the [ ] button (1 sec.).

Bass/treble characteristics become flat and

“FLAT” is show in the display.

3-3. Turn the [ROTARY] knob to change to the

“OFF” mode.

● Adjusting the bass

This adjustment is supported only when

Z-Enhancer Plus is set to “CUSTOM”.

2-1. Select “BASS”.

3-1. Press the [ ] button.

3-2. Press [x] or [v] to change and select

settings as follows:

“B<G 0>” ↔ “B<F 60>” ↔ “Q 1”

3-3. Turn the [ROTARY] knob to adjust values

for gain, F (center frequency) and Q curve.

B<G 0> :The factory default setting is “0”.

(Adjustment range:

+7 to –7)

B<F 60> :The factory default setting is

“60”.

(Adjustment range:

60/80/100/200)

Q 1 :The factory default setting is “1”.

(Adjustment range: 1/1.25/1.5/2)

3-4. Press the [ ] button to return to the

previous mode.

● Adjusting the treble

This adjustment is supported only when

Z-Enhancer Plus is set to “CUSTOM”.

2-1. Select “TREBLE”.

3-1. Press the [ ] button.

3-2. Press [x] or [v] to change and select

settings as follows:

“T<G 0>” ↔ “T<F 10K>”

3-3. Turn the [ROTARY] knob to adjust values

for gain and F (center frequency).

T<G 0> : The factory default setting is “0”.

(Adjustment range: +7 to

–7)

T<F 10K>: The factory default setting is

“10K”.

(Adjustment range: 10K/12.5K/

15K/17.5K)

3-4. Press the [ ] button to return to the

previous mode.

To change sound settings

1. Press the [SOUND] button to switch to the

sound adjustment display.

∗ The factory default sound setting is “Z-

EHCR+”.

2. Press [x] or [v] to select the sound

adjustment mode.

Each time [x] or [v] is pressed, the

sound adjustment mode changes as

follows:

“Z-EHCR+” ↔ “BASS” ↔ “TREBLE” ↔

“BALANCE” ↔ “FADER” ↔ “NF VOL”

∗ When “ENT” is flashing in the display, press

the [] button to adjust the setting value.

∗ The sound adjustment mode is displayed

for 2 seconds before showing the sound

setting.

3. Turn the [ROTARY] knob to adjust the

selected audio mode.

4. After completing settings, press the

[SOUND] button to return to the previous

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ209 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info