Bedienungsanleitung Clarion CZ209 (Seite 14 von 23) (Englisch)

580439

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English

14 CZ209

Operations Common to

Each Mode

● Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ ] button

3-2. Press [x] or [v] to select the hour or

minute.

3-3. Turn the [ROTARY] knob to set the time.

∗ The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time in

memory and return to the previous mode.

Note:

• You cannot set the clock when it is displayed

with only the car’s ignition on. If the car’s battery

dies or is removed, or the unit is removed, the

clock will be reset. If another button/operation is

selected while setting the clock, the clock set

mode is canceled.

● Displaying the settings

You can see the state of current settings at any

operation mode.

2-1. Select “SETTINGS”.

3-1. Turn the [ROTARY] knob to display the

current settings.

∗ When the setting is selected, the current

state will be displayed after 1 second.

● Turning the screen saver on/off

This unit has a screen saver function in which

various patterns and random characters can be

displayed on the operation status indication

area. This function can be turned on/off. If a

button is pressed while the screen saver is on,

the corresponding operation display is shown

for about 30 seconds, and then the display

returns to the screen saver.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

● Setting title scroll method

Set how to scroll in CD-TEXT and MP3/WMA

titles.

∗ The factory default setting is “ON”.

2-1. Select “SCROLL”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

• ON: Scroll automatically.

• OFF: Scroll 1 time only.

● Setting dimmer control

Dimmer control can be set “ON” or “OFF”.

∗ The factory default setting is “ON”.

2-1. Select “DIMMER”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

● Setting car speaker output for cell

phones

When the AUX input jack is used to connect an

AUX BLUETOOTH BB (BLT370) (sold

separately):

∗ The factory default setting is “RIGHT”.

∗ To output the telephone calls, set cell phone

interrupt to “ON”.

2-1. Select “TEL-SP”.

3-1. Turn the [ROTARY] knob to select “RIGHT”

or “LEFT”.

• RIGHT: Telephone calls can be heard on

the front right speaker connected to this

unit.

• LEFT: Telephone calls can be heard on

the front left speaker connected to this

unit.

To change settings

1. Press and hold the [DISP] button (1 sec.)

to switch to the adjustment display.

2. Press [x] or [v] to select the “item

name” as follows:

“CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR”

↔“SCROLL” ↔ “DIMMER” ↔ “TEL-SP”

↔ “TEL-SW”

∗ The adjustment item will be displayed for 2

seconds before showing the desired value.

3. Turn the [ROTARY] knob to select the

desired value.

∗ When “ENT” is flashing in the display, press

the [ ] button to adjust setting value.

4. After completing settings, press the [DISP]

button to return to the previous mode.

Example: After 1 second:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ209 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info