Bedienungsanleitung Clarion CZ209 (Seite 17 von 23) (Englisch)

580439

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English

17 CZ209

iPod Operations

This section describes operations when

connected to an Apple iPod via the USB cable.

Notes:

• See the iPod Owner’s Manual for details

regarding operations.

• The unit will not operate, or may operate

improperly with unsupported versions.

• For a list of Apple iPod models compatible with

this unit, please contact your Clarion dealer or

www.clarion.com.

• Made for iPod means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by the

developer to meet Apple performance

standards.

Apple is not responsible for the operation of this

device or its compliance with safety and

regulatory standards.

iPod and iTunes are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Connecting an iPod

When an iPod is connected to the USB cable,

the “Shuffle” setting on the iPod will become as

follows:

• “Shuffle (Albums)” play ➜ Random play

• “Shuffle (Songs)” play ➜ All random play

The iPod has two modes: the “Play mode” and

the “iPod menu mode” for selecting tracks.

Switch between these modes by pressing the

[BND] button.

Note:

• To connect an iPod, please use the USB cable

that came with your iPod.

Select iPod mode

1. Press the [SRC] button.

Playback will begin from the last file that was

played on the iPod.

Notes:

• The following operations in Play mode operate

the same as in CD mode:

∗ Track selection: [x], [v]

∗ Fast-forward/fast-reverse: [x], [v]

∗ Pause: []

See “CD/MP3/WMA Operations” (page 11-13)

for details.

• After a Podcast file has completed playback, the

pause display, or the track-end position Play-

Time display will appear. At that time, select a

music file once again.

• If the iPhone is used for telephone call in the

other operation mode and you wish to switch to

the iPod mode, you must finish the telephone call

and press the [ ] button to enter the iPod

mode.

Setting iPod simple mode

Use this function if you wish to operate through

your iPod connected to this unit via the USB

cable.

∗ The factory default setting is “OFF”.

1. Press and hold the [DISP] button (1 sec.).

2. Press [x] or [v] to select “S-CTRL”.

3. Press the [ ] button.

4. Turn the [ROTARY] knob to select “ON” or

“OFF”.

• ON: Operations can be made through your

iPod.

• OFF: Operations cannot be made through

your iPod.

5. Press and hold the [ ] button (1 sec.) to

store the setting and return to the previous

mode.

Notes:

• When performing iPod operations using simple

control mode, make the operations slowly. If

repetitive operations are performed too quickly,

unforseen errors may occur.

• Some iPod models do not support this function.

Consult your nearest Clarion dealer or website to

confirm which models do not support this

function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ209 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info