Bedienungsanleitung Clarion CZ301E (Seite 11 von 30) (Englisch)

473636

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English

Select tuner as playing source

Press [SRC / ] button once or more to

enter RADIO mode.

Select one radio band

Press the [BAND] button on the panel to

select one radio band among FM1, FM2,

FM3, MW and LW.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [ ] or [ ] button on the

panel to tune in a higher / lower station.

Auto tuning

Press and hold the [ ] or [ ] button

on the panel to seek a higher / lower station.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

in preset memory in order. This function is

useful when searching for a desired station

in memory.

Radio Operations

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press

the [PS/AS] button again to continue

receiving that station.

Note:

• Be careful not to press and hold the

[PS/AS] button for 1 second or longer,

otherwise the auto store function is

engaged and the unit starts storing

stations.

Auto store

Only stations with sufcient signal strength

will be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.) to

start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 5 bands, such as FM1, FM2,

FM3, MW and LW. FM3, MW and LW can

store by AS function. Each bands can

store 6 stations, CZ301E can store 30

stations in total.

Manual store

When one expected radio station has been

detected, press and hold number button 1-6

to store it in the memory.

Audio Setup

Press the [SOUND] button to enter sound

effect setting mode. First press shows

current EQ. Rotate the [VOLUME] knob to

changes BEAT EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Rotate the [VOLUME] knob to changes

CUSTOM, and press the [VOLUME] knob,

the press [ ] or [ ] button to select

it including: BAS-G -> BAS-F -> BAS-Q

-> MID-G -> MID-F -> MID-Q -> TRE-G ->

TRE-F, rotate the [VOLUME] knob to select

a value.

BAS-G / MID-G / TRE-G: (-7)- (+7)

BAS-F: 60 / 80 / 100 / 200

BAS-Q: 1.0 / 1.25 / 1.5 / 2.0

MID-F: 500 / 1K / 1.5K / 2.5K

MID-Q: 0.5 / 0.75 / 1.00 / 1.25

TRE-F: 10.0K / 12.5K / 15.0K / 17.5K

Press the [SOUND] button, then press [ ] or

[ ] button to select USER preset including:

BALANCE -> FADER -> M-B EX -> LPF (low

pass lter) -> S-W VOL (Subwoofer Volume),

rotate the [VOLUME] knob to select a value.

BALANCE: LEFT 1-7->CENTER->RIGHT

1-7

FADER: FRONT 1-7->CENTER->REAR 1-7

M-BEX: ON/OFF

LPF: THROUGH / 80 / 120 / 160

SUBW VOL: (-6)- (+6)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ301E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ301E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info