Bedienungsanleitung Clarion CZ302E (Seite 7 von 16) (Englisch)

473637

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

English

CZ302E

Radio Operations

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [

] or [ ] button on the panel

to select a higher / lower station.

Auto tuning

Press and hold the [ ] or [ ] button on

the panel to seek a higher / lower station.

To stop searching, repeat the operation above

or press other buttons having radio functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

in preset memory in order. This function is

useful when searching for a desired station

in memory.

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press

the [PS/AS] button again to continue

receiving that station.

Note:

• Be careful not to press and hold the [PS/

AS] button for 1 second or longer, otherwise

the auto store function is engaged and the

unit starts storing stations.

Auto store

Only stations with sufcient signal strength will

be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.) to

start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 5 bands, such as FM1, FM2,

FM3, MW and LW. FM3, MW and LW can

store by AS function. Each bands can

store 6 stations, CZ302E can store 30

stations in total.

Manual store

When one expected radio station has been

detected, press and hold number button 1-6

to store it in the memory.

Recall the stored stations

Press one numeric button among 1 to 6 on the

panel to select the corresponding stored station.

Local seeking

When LOCAL seeking is ON, only those

radio stations with strong radio signal could

be received.

Select LOCAL function, press and hold

the [ DISP ] button on the front panel, then

press [

] button repeatedly until LO or

DX displays on the screen, and rotate the

[VOLUME] knob to select Local or Distant

mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

Radio Data System Operations

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast

stations transmitting “Radio Data System” data.

When using the “Radio Data System” function,

always set the radio to FM mode.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is “ ON ”.

1. Set to system setup by long pressing

[ DISP ] button.

2. Press the [

] or [ ] button to select

“AF”.

3. Rotate the knob to select “ ON ” or “ OFF ”.

• ON:

“AF” indicator appears in the display and

AF function turns on.

• OFF:

“AF” indicator disappears in the display

and AF function turns off.

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for

that region is received.

* The factory default setting is “ON”.

Notes:

• This function is disabled when a national

station such as BBC R2 is being received.

• The REG function ON/OFF setting is valid

when the AF function is ON.

1. Set to system setup by long pressing

[ DISP ] button.

2. Press the [

] or [ ] button to select

“REG”.

3. Rotate the [VOLUME] knob to select

“ ON” or “ OFF”.

Manually tuning a regional station

in the same network

This function is valid when the AF function is

ON and the REG function is OFF.

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trafc Announcement)

In the TA standby mode, when a trafc

announcement broadcast starts, the trafc

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Trafc programme (TP)

automatic tuning is also available.

* This function can only be used when “TP”

appears in the display. When “TP” appears,

Radio Data System Operations

this means that the “Radio Data System”

broadcast station being received has trafc

announcement programmes.

Setting the TA standby mode

If you press the [TA] button, “TA” lights in

the display and the unit is set into the TA

standby mode until a trafc announcement

is broadcast. When a trafc announcement

broadcast starts, “TRAF INF” appears in the

display. If you press the [TA] button while

a trafc announcement broadcast is being

received, the trafc announcement broadcast

reception is cancelled and the unit goes into

the TA standby mode.

Cancelling the TA standby mode

As “TA” appears in the display, press the

[TA] button. The “TA” in the display goes off

and the TA standby mode is cancelled.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type

even if the unit is on a function mode other

than radio.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station has

priority over a PTY broadcast station.

Selecting PTY

Press [MENU / ] button, then rotate the

[VOLUME] knob to select PTY type, press

the [VOLUME] knob, the unit begin

searching.

CD/MP3/WMA Operations

This unit can playback MP3/WMA

les

Notes:

• If you play a WMA file with active DRM

(Digital Rights Management), there will be no

audio. (The WMA indicator blinks).

To disable DRM

(Digital Rights Management)

When using Windows Media Player 9/10/11,

click on Tool -> Options -> Copy Music tab,

then under Copy Settings, unclick the

check box for copy protected music Music.

Then, reconstruct les.

Personally constructed WMA les are used

at your own responsibility.

Precautions when creating MP3/

WMA le

Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate

8 kbps-320 kbps / VBR

2. WMA: Bit rate 8 kbps-320 kbps

Clarion CZ302E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ302E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info