Bedienungsanleitung Clarion CZ302E (Seite 10 von 16) (Englisch)

473637

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

English

CZ302E

Bluetooth Operations

The Bluetooth allows you to utilize your car’s

built-in audio system for wireless mobile phone

or music handsfree communication. Some

Bluetooth mobile phones have the audio

features, and some portable audio players

support Bluetooth feature. This system can

play audio data stored in a Bluetooth audio

device. The car stereo with Bluetooth will be

able to retrieve phonebook contacts, received

call, dialed call, missed call, incoming calls,

outgoing call and listen to music.

Note:

• Do not leave the microphone of Bluetooth

handsfree in the places with wind passing

such as air outlet of the air conditioner,

etc. This may cause a malfunction.

• If leave it in the places subjected to direct

sun, high temperature can cause distortion,

discoloration which may result in a

malfunction.

• This system will not operate or may operate

improperly with some Bluetooth audio

players.

• Clarion cannot guarantee the compatibility

of all mobile phones together with unit.

• Audio playback will be set to the same

volume level as set during telephone call.

This might cause problems, if extreme

volume level is set during telephone call.

Handsfree Operations

Pairing

1. Turn on Bluetooth function of your mobile

phone.

2. Enter mobile phone’s Bluetooth setup

menu.

3. Search for new Bluetooth devices.

4. Select CZ302E from the pairing list on the

mobile phone.

5. Enter “0000” as the password (The

password default setting is “ 0000 ”).

6. After pairing successfully, the unit will

enter Bluetooth mode automatically, and

“CONNECTED” will appear on the LCD.

7. The unit can connect three units.

Making a call

Operation from Bluetooth menu

Press the [SRC /

] button to switch the

source to “BLUETOOTH”. Press [MENU /

]

button to select a way to make outgoing call:

• Dial Number

1. Press the [MENU /

] button.

2. Rotate the [VOLUME] knob on the front

panel to switch: , “DIAL NUM”.

3. Press the [VOLUME] knob to conrm the

selection.

4. Rotate the [VOLUME] knob to select a

number, press the knob to conrm and

ready to input the next digit. Repeat the

above until all numbers inputted.

5. Press the [VOLUME] knob to dial.

6. Press [MENU /

] to terminate call.

• Dialled/Missed/ Received

You can search any Dialled/Missed/Received

/User pbk.

1. Rotate the [VOLUME] knob to select

“DIALLED”, “MISSED” , “RECEIVED”.

2. Press the [VOLUME] knob to enter the

selected call history.

3. Rotate the [VOLUME] knob to scroll the

contacts.

4. When the contact name or mobile phone

No. is displayed, press the [VOLUME]

knob to call the mobile phone No. of that

contact.

* Press the [MENU /

] button to end the

call.

• Call from Phonebook

User can search the contact name in the

phonebook and make call.

1. Rotate the [VOLUME] knob to select

“USER PBK” .

2. Press the [VOLUME] knob to enter the

selected phonebook.

3. Rotate the [VOLUME] knob to scroll the

contacts.

4. The phone number and the name to

scrool display.When the contact name is

displayed, press the [VOLUME] knob to

call the mobile phone No. of that

contact.

* Press the [MENU /

] button to end the

call.

Note:

• Some mobile phones may not be able to

transfer data of Phonebook.

• After RESET, please wait few minutes

until data transferred following to the

Bluetooth mode selection. During that,

“PBK UPDATE” is on the display.

• Redial

You can call last dialed number.

Press and hold the [BAND /

] button

(1sec).

Bluetooth Operations

• Transfer Call

You can switch Handsfree call and mobile

phone call.

Press the [BAND /

] button during call.

• Answering a call

You can answer an incoming call by pressing

the [BAND /

] button.

* Press the [MENU /

] button to reject an

incoming call.

Audio Streaming Operations

What is audio streaming?

Audio streaming is a technique for transferring

audio data such that it can be processed as

a steady and continuous stream. Users can

stream music from their external audio player

to their car stereo wirelessly and listen to the

tracks through the car’s speakers. Please

consult your nearest Clarion dealer for more

information on the product of wireless audio

streaming transmitter offered.

CAUTION

Please avoid operating your connected

mobile phone while audio streaming as this

may cause noise or sound choppy on the

song playback.

Audio streaming may or may not resume

after telephone interrupt as this is

dependent on mobile phone.

System will always return to Radio mode if

audio streaming is disconnected.

Note:

Be sure to read the chapter “Pairing before

proceeding.

Play / Pause a track

1. Push the [ 4 ] button to pause audio

playback.

2. To resume audio playback, push the [ 4 ]

knob again.

Selecting a track

Track-up

1. Press the [

] button to move to the

beginning of the next track.

2. Each time the [

] button is pressed,

playback proceeds to another track in the

advancing direction.

Track-down

1. Press the [

] button to move to the

beginning of the previous track.

2. Each time the [

] button is pressed,

playback proceeds to previous track in the

reverse direction.

Note:

Playing order will depend on Bluetooth

audio

player. When [

] button is pressed, some

A2DP devices will restart the current track

depends on the duration of playback.

During music streaming playback, “A2DP

and HFP” will be shown on the display. When

A2DP device is disconnected,

“ DISCONNECT” will be shown on the display

and return to previously selected audio source.

Some Bluetooth

audio players may not have

play / pause synchronized with this unit. Please

make sure both device and main unit are in the

same play / pause status in BT MUSIC mode.

ID3 display

SCROLL: ON/OFF

During music streaming playback, for music

information that is longer than the display

panel:

When SCROLL is ON, the LCD will display

ID3 TAG information cyclely, e.g: TRACK-

>ALBUM->TITLE->ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other ID3

TAG information by press [ DISP ] button.

Press [SRC /

] button on the panel to select

“AUX”.

AUX is just for audio content with 3.5mm Jack

connector plugged into audio-in socket on the

front panel.

AUX Input sensitivity setting

1. Press and hold the [ DISP ] button

(1 sec.).

AUX Operations

2. Turn the [VOLUME] knob to select “AUX

SENS”.

3. If the output level of connected external

audio player is “HIGH”, rotate [VOLUME]

knob and choose “LOW”. And if the

output level is “LOW”, choose “HIGH”.

Clarion CZ302E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ302E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info