Bedienungsanleitung Clarion cz500e (Seite 12 von 29) (Englisch)

169006

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

Radio Data System

This unit has a built-in Radio Data System

decoder system that supports broadcast

stations transmitting Radio Data System data.

When using the Radio Data System function,

always set the radio to FM mode.

AF function

The AF function switches to a dierent

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is ON.

1. Press and hold the [D] button.

2. Press the [ ] or [ ] button to select

AF.

3. Rotate the knob to select AF ON or AF

OFF.

• AF ON:

“AF” in the display lights and AF function

turns on.

• AF OFF:

“AF” in the display goes o and AF function

turns o.

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for

that region is received.

* The factory default setting is ON.

Notes:

• This function is disabled when a national

station such as BBC R2 is being received.

• The REG function ON/OFF setting is valid

when the AF function is ON.

1. Press and hold the [D] button.

2. Press the [ ] or [ ] button to select

REG.

3. Rotate the knob to select REG ON or REG

OFF.

Manually tuning a regional

station in the same network

1. This function is valid when the AF function

is ON and the REG function is OFF.

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trac Announcement)

In the TA standby mode, when a trac

announcement broadcast starts, the trac

announcement broadcast is received as top

priority regardless of the function mode so

you can listen to it. Trac programme (TP)

automatic tuning is also possible.

* This function can only be used when

“TP” is lit in the display. When “TP” is lit,

this means that the Radio Data System

broadcast station being received has trac

announcement programmes.

SettingtheTAstandbymode

If you press the [TA] button, “TA” lights in

the display and the unit is set into the TA

standby mode until a trac announcement

is broadcast. When a trac announcement

broadcast starts, “TRAF INF” appears in the

display. If you press the [TA] button while

a trac announcement broadcast is being

received, the trac announcement broadcast

reception is cancelled and the unit goes into

the TA standby mode.

CancellingtheTAstandbymode

When “TA” is lit in the display, press the [TA]

button. The “TA” in the display goes o and

the TA standby mode is cancelled.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type

even if the unit is on a function mode other

than radio.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station has

priority over a PTY broadcast station.

Selecting PTY

Press the [MENU] button, then rotate the

knob to select PTY type, and press the

knob to conrm selection, the unit begins

searching.

Radio Data System Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion cz500e Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion cz500e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info