Bedienungsanleitung Clarion CZ501E (Seite 14 von 31) (Englisch)

473640

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast

stations transmitting “Radio Data System”

data.

When using the “Radio Data System”

function, always set the radio to FM mode.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is ON.

1. Set to system setup by long pressing [D]

button.

2. Press the [ ] or [ ] button to select

“AF”.

3. Rotate the [VOLUME] knob to select ON

or OFF.

 •AFON:

“AF” indicator appears in the display and

AF function turns on.

 •AFOFF:

“AF” indicator disappears in the display

and AF function turns off.

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for

that region is received.

* The factory default setting is ON.

Notes:

• This function is disabled when a national

station such as BBC R2 is being received.

• The REG function ON/OFF setting is valid

when the AF function is ON.

1. Set to system setup by long pressing [D]

button.

2. Press the [ ] or [ ] button to select

“REG”.

3. Rotate the [VOLUME] knob to select ON

or OFF.

Manually tuning a regional station

in the same network

1. This function is valid when the AF function

is ON and the REG function is OFF.

Radio Data System Operations

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trafc Announcement)

In the TA standby mode, when a trafc

announcement broadcast starts, the trafc

announcement broadcast is received as top

priority regardless of the function mode so

you can listen to it. Trafc programme (TP)

automatic tuning is also available.

* This function can only be used when

“TP” appears in the display. When “TP”

appears, this means that the “Radio Data

System” broadcast station being received

has trafc announcement programmes.

SettingtheTAstandbymode

If you press the [TA] button, “TA” lights in

the display and the unit is set into the TA

standby mode until a traffic announcement

is broadcast. When a traffic announcement

broadcast starts, “TRAF INF” appears in the

display. If you press the [TA] button while

a traffic announcement broadcast is being

received, the trafc announcement broadcast

reception is cancelled and the unit goes into

the TA standby mode.

CancellingtheTAstandbymode

As “TA” appears in the display, press the [TA]

button. The “TA” in the display goes off and

the TA standby mode is cancelled.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type

even if the unit is on a function mode other

than radio.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station has

priority over a PTY broadcast station.

Selecting PTY

Press [MENU] button, then rotate the

[VOLUME] kn ob to selec t PTY type,

press the [VOLUME] knob, the unit begin

searching.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ501E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ501E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info