Bedienungsanleitung Clarion CZ509EG (Seite 18 von 36) (Englisch)

580520

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

CD/MP3/WMA/AAC Operations

English

18 CZ509E/CZ509ER/CZ509EG

Backup Eject function

Just pressing the [Q] button, ejects the disc

even if the power to the unit was not turned on.

1. Press the [OPEN] button to open the FLIP

DOWN PANEL.

Note:

• If the FLIP DOWN PANEL will not open far

enough, open it gently with your hand.

2. Press the [EJECT] button. Remove the disc

after it is ejected.

3. Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

Notes:

• Always close the FLIP DOWN PANEL once you

take out the disc.

• If you force a CD into before auto reloading, this

can damage the CD.

• If a CD (12 cm) is left in the ejected position for

15 seconds, the CD is automatically reloaded

(Auto reload).

Listening to a disc already loaded in

the unit

Press the [SRC] button to select the CD/MP3/

WMA/AAC mode.

When the unit enters the CD/MP3/WMA/AAC

mode, play starts automatically.

If there is no disc loaded, the indication “NO

DISC” appears in the title display.

Loading a CD

1. Press the [OPEN] button to access the CD

SLOT behind the FLIP DOWN PANEL.

2. Insert a CD into the center of the CD SLOT

with the labeled side facing up. The CD plays

automatically after loading.

Notes:

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

• Discs not bearing the or mark and

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

3. Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

CAUTION

Be careful not to catch your hand or fingers

while closing the FLIP DOWN PANEL.

Notes:

• If the FLIP DOWN PANEL does not open fully,

gently open with your hand.

• After loading a CD, always close the FLIP DOWN

PANEL.

Pausing play

1. Press the [ ] button to pause play.

“PAUSE” appears in the display.

2. To resume CD play, press the [ ] button

again.

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA/AAC disc and user titles input with this

unit.

1. Each time you press the [DISP] button to

change the title display.

● CD-TEXT disc

User ➜ Track ➜ Disc/Artist ➜ User ...

● MP3/WMA/AAC disc

Track ➜ Folder ➜ Title/Album ➜ Artist ➜

Track ...

Notes:

• If the CD playing is not a CD-text CD or no user

title has been input, “NO TITLE” appears in the

display.

• If MP3/WMA/AAC disc is not input TAG, “NO

TITLE” appears in the display.

• For MP3, supports ID3 Tags V2.3/2.2/1.1/1.0.

• Tag displays give priority to V2.3/2.2.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

• Only ASCII characters can be displayed in Tags.

Selecting a track

● Track-up

1. Press the [v] button to move ahead to the

beginning of the next track.

2. Each time you press the [v] button, the

track advances ahead to the beginning of the

next track.

CZ509E_EN.book Page 18 Wednesday, January 21, 2009 5:27 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ509EG Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ509EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info