Bedienungsanleitung Clarion CZ509ER (Seite 24 von 36) (Englisch)

580519

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

English

24 CZ509E/CZ509ER/CZ509EG

Operations Common to Each Mode

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”.

(Adjustment level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Press the [ ] or [ ] button to adjust the

contrast.

● Displaying the settings

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [ ] or [ ] button to display the

state of current settings.

∗ When the setting is selected, after 1 second

the current state will be displayed.

● Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [ ] or [ ] button to select the

setting.

Each time you press the [ ] or [ ]

button, the setting changes in the following

order:

“MESSAGE” ↔ “ON” ↔ “OFF”

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “WELCOME TO

CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button (1 sec.) to

clear the old message.

3-3. Press the [x] or [v] button to move the

cursor.

3-4. Press the [BND] button to select a

character type. Each time you press the

[BND] button, the character type changes

in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters…

3-5. Press the [ ] or [ ] button to select the

desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

3-7. Press and hold the [ ] button (2 sec.) to

store the message in memory.

∗ Press and hold the [BND] button (1 sec.) to

cancel the input message. Then press and

hold the [ ] button (2 sec.) to store the

message and the message return to default

setting.

To change adjustment setting

1. Press and hold the [DISP] button (1 sec.)

to switch to the adjustment selection

display.

2. Press the [x] or [v] button to select

the “item name”.

“CONTRAST” ↔ “SETTINGS” ↔

“SCRN SVR” ↔ “MESSAGE INPUT” ↔

“SCROLL” ↔ “DIMMER” ↔ “BLINKLED”

↔ “A-CANCEL” ↔ “INT-SW” ↔ “SYSTEM

CHECK”

3. Press the [ ] or [ ] button to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

For example: after 1 second:

CZ509E_EN.book Page 24 Wednesday, January 21, 2009 5:27 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ509ER Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ509ER

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info