Bedienungsanleitung Clarion CZ702E (Seite 10 von 20) (Englisch)

580521

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

CZ702E

Radio Data System Operations

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast

stations transmitting “Radio Data System” data.

When using the “Radio Data System” function,

always set the radio to FM mode.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is ON.

1. Set to system setup by long pressing [DISP]

button.

2. Press the [ ] or [ ] button to select

“AF”.

3. Rotate the [VOLUME] knob to select ON or

OFF.

• AF ON:

“AF” indicator appears in the display and AF

function turns on.

• AF OFF:

“AF” indicator disappears in the display and

AF function turns off.

REG (Regional programme) function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for

that region is received.

* The factory default setting is ON.

Notes:

• This function is disabled when a national

station such as BBC R2 is being received.

• The REG function ON/OFF setting is valid

when the AF function is ON.

1. Set to system setup by long pressing [DISP]

button.

2. Press the [

] or [ ] button to select

“REG”.

3. Rotate the [VOLUME] knob to select ON or

OFF.

Manually tuning a regional station

in the same network

This function is valid when the AF function is

ON and the REG function is OFF.

Manually tuning a regional station in

the same network

This function is valid when the AF function is

ON and the REG function is OFF.

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trafc Announcement)

In the TA standby mode, when a trafc

announcement broadcast starts, the trafc

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Trafc programme (TP)

automatic tuning is also available.

* This function can only be used when “TP”

appears in the display. When “TP” appears, this

means that the “Radio Data System” broadcast

station being received has trafc announcement

programmes.

Setting the TA standby mode

If you press the [TA] button, “TA” lights in the

display and the unit is set into the TA standby

mode until a trafc announcement is broadcast.

When a trafc announcement broadcast starts,

“TRAF INF” appears in the display. If you press

the [TA] button while a traffic announcement

broadcast is being received, the tr affic

announcement broadcast reception is cancelled

and the unit goes into the TA standby mode.

Cancelling the TA standby mode

As “TA” lights in the display, press the [TA]

button. The “TA” in the display goes off and the

TA standby mode is cancelled.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station has

priority over a PTY broadcast station.

Selecting PTY

Press [MENU /

] button, then rotate the

[VOLUME] knob to select PTY type, press the

[VOLUME] knob, the unit begin searching.

DAB Operations

This function is available when DAB302E

(sold separately) is connected.

Select tuner as playing source

Press [SRC / ] button once or more to

enter DAB mode.

Selecting the radio band

Press the [BAND / ] button on the panel

or on the remote control to select one radio

band among D1, D2 and D3.

Selecting the ensemble

• Manual selecting

During manual selecting, the ensemble

will be changed in steps.

Press the [ ] or [ ] button on

the panel to tune in a higher / lower

ensemble.

• Auto selecting

Press and hold the [ ] or [ ]

button to seek a higher / lower ensemble.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a ensamble service is received,

searching stops and the service in current

ensemble is played.

Turning the service

• Manual turning

During manual turning, the ensemble will

be changed in steps.

Press the [ ] or [ ] button on the

panel to tune in a higher / lower service.

• Auto turning

Press and hold the [ ] or [ ]

button to seek a higher / lower service.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a service is received, searching stops

and the service is played.

Manual store

When one expected service has been

detected, press and hold button [ 1-6 ] to store

it in the memory.

Preset scan

Preset scan receives the services stored

in preset memory in order. This function is

useful when searching for a desired service

in memory.

1. Press the [PS/AS] button.

2. When a desired service is tuned in, press

the [PS/AS] button again to continue

receiving that service.

Recall the stored stations

Press one numeric button among 1 to 6 on

the panel to select the corresponding stored

service.

REG (Regional programme)

TA (Trafc Announcement)

PTY (Programme Type)

These functions is same as Radio Data

system. Refer to page10.

Clarion CZ702E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ702E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info