Bedienungsanleitung Clarion CZ703E (Seite 9 von 20) (Englisch)

580420

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

CZ703E

Audio Setup

SLOP: -6 / -12DB

- REAR SPK: PHASE NOR/PHASE REV

• SP GAIN

HIGH: -20-----0DB

MID: -20-----0DB

REAR: -20-----0DB

3. When speaker system is “3WAY”.

• TIME ALIGNMENT

HIGH L/R: 0----501.4cm

MID L/R: 0----501.4cm

SW L/R: 0----501.4cm

• 3way crossover

- HIGH HPF

CUT: 25HZ / 31.5HZ / 40HZ / 50HZ / 63HZ

/ 80HZ / 100HZ / 125HZ / 160HZ / 200HZ /

250HZ / 315HZ / 400HZ / 500HZ / 630HZ /

800HZ / 1K / 1.25K / 1.6K / 2K / 2.5K / 3.15K

/ 4K / 5K / 6.3K / 8K / 10.0K / 12.5K / 16K /

20K / THROUGH

SLOP: -6 / -12DB

- HIGH SPK: PHASE NOR/PHASE REV

- MID LPF

CUT: 630HZ / 800HZ / 1K / 1.25K / 1.6K

/ 2K / 2.5K / 3.15K / 4K / 5K / 6.3K / 8K /

10.0K / THROUGH

SLOP: -6 / -12DB

- MID HPF

CUT: 25HZ / 31.5HZ / 40HZ / 50HZ / 63HZ

/ 80HZ / 100HZ / 125HZ / 160HZ / 200HZ /

250HZ / 315HZ / 400HZ / 500HZ / 630HZ /

800HZ / 1K / 1.25K / 1.6K / 2K / 2.5K / 3.15K

/ 4K / 5K / 6.3K / 8K / 10.0K / THROUGH

SLOP: -6 / -12DB

- MID SPK: PHASE NOR/PHASE REV

- SW LPH

CUT: 25HZ / 31.5HZ / 40HZ / 50HZ / 63HZ

/ 80HZ / 100HZ / 125HZ / 160HZ / 200HZ /

250HZ / 315HZ / 400HZ / 500HZ / 630HZ /

800HZ / 1K / 1.25K / 1.6K / 2K / 2.5K / 3.15K

/ 4K / 5K / 6.3K / 8K / 10.0K / THROUGH

SLOP: -6 / -12DB

- SW HPF

CUT: THROUGH / 16HZ / 20HZ / 25HZ

/ 31.5HZ / 40HZ / 50HZ / 63HZ / 80HZ /

100HZ/ 125HZ / 160HZ / 200HZ /250HZ

SLOP: -6 / -12DB

- SW SPK: PHASE NOR/PHASE REV

• SP GAIN

HIGH: -20-----0DB

MID: -20-----0DB

S-WOOFER: -20-----0DB

STORE/RECALL (NORMAL, 2WAY and

3WAY mode)

Rotate the [VOLUME] knob to choose “STORE

/ RECALL”. Press the [VOLUME] knob to

conrm.

• STORE

Rotate the [VOLUME] knob to select a

position among “MEMORY 1, 2 and 3”. Then

press and hold the [VOLUME] knob to store.

• RECALL

Rotate the [VOLUME] knob to select a

position among “MEMORY 1, 2 and 3”. Then

press the [VOLUME] knob to recall.

Adjusting Sound Mode

Short-press the [ ] button to enter sound

effect setting mode. First press shows current

EQ. Rotate the [VOLUME] knob to change the

BEAT EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Rotate the [VOLUME] knob to choose the

CUSTOM, and press the [VOLUME] knob, then

press [

] or [ ] button to select it

including:

BAND 1 G -> BAND 1 F -> BAND 1 Q -> BAND

2 G -> BAND 2 F -> BAND 2 Q -> BAND 3 G ->

BAND 3 F -> BAND 3 Q -> BAND 4 G -> BAND

4 F -> BAND 4 Q -> BAND 5 G -> BAND 5 F ->

BAND 5 Q, rotate the [VOLUME] knob to select

a value.

BAND 1/2/3/4/5 G: (-12) - (+12)

BAND 1/2/3/4/5 F: 20HZ - 20.0K, THROUGH

BAND 1/2/3/4/5 Q: 1, 3, 5, 7, 20

Press the [

] button, then press [ ]

or [

] button to select USER preset including:

BALANCE -> FADER(NORMAL, 2 WAY mode)

-> SUBW VOL(Subwoofer Volume)(NORMAL,

3 WAY mode), rotate the [VOLUME] knob to

select a value.

BALANCE: LEFT 1-12->CENTER->RIGHT

1-12

FADER: LEFT 1-12->CENTER->RIGHT 1-12

SUBW VOL: (-6) - (+6)

Note:

The setting items below are not stored in

memory. After RESET or the back-up line

is disconnected, redo these settings. We

recommend you to take a note to keep the

records.

Select tuner as playing source

Press [SRC / ] button once or more to

enter RADIO mode.

Selecting the radio band

Press the [BAND / ] button on the panel

to select one radio band among FM1, FM2,

FM3, MW and LW.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [ ] or [ ] button on the

panel to tune in a higher / lower station.

Press the [ ] or [ ] button on the

remote control to select preset stations.

Auto tuning

Press and hold the [ ] or [ ] button

to seek a higher / lower station.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

in preset memory in order. This function is

useful when searching for a desired station

in memory.

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press

the [PS/AS] button again to continue

receiving that station.

Note:

Be careful not to press and hold the [PS/AS]

button for 1 second or longer, otherwise the

auto store function will begin and the unit

starts storing stations.

Radio Operations

Auto store

Only stations with sufcient signal strength will

be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.) to

start automatic station search.

To stop auto store, press other buttons having

radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 5 bands, such as FM1, FM2,

FM3, MW and LW. FM3, MW and LW can

store by AS function. Each bands can store

6 stations, CZ703E can store 30 stations in

total.

Manual store

When one expected radio station has been

detected, press and hold number button 1-6 to

store it in the memory.

Recall the stored stations

Press one numeric button among 1 to 6 on

the panel to select the corresponding stored

station.

Local seeking

When LOCAL seeking is ON, only those

radio stations with strong radio signal could

be received.

To select LOCAL function, press and hold the

[ DISP ] button on the front panel, then press

[ ] button repeatedly until LO or DX

displays on the screen, and rotate the

[VOLUME] knob to select Local or Distant

mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

Clarion CZ703E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ703E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info