Bedienungsanleitung Clarion DB178RMP (Seite 13 von 28) (Englisch)

35320

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English

DB178RMP / DB179RMP / DB179RGMP

Manual memory function

1. Press the

[

BND

]

button and to select a band

you want to store in the memory.

2. Press the

[

]

button to tune into a

desired station.

3. Press and hold one of the

[

DIRECT

]

buttons for

2 seconds or longer to store the current station

into preset memory.

Step tuning:

Press the

[

]

button to perform manual

tuning.

∗ If no operation is performed for more than 7 sec-

onds, manual tuning is cancelled and the display

returns to the previous mode.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

When you are in the step Tuning mode, the fre-

quency changes one step at a time. In the quick

Tuning mode, you can quickly tune the desired

frequency.

1. Press the

[

BND

]

button and select the desired

band

(

FM or AM

(

MW/LW

))

∗ If “MANU” is not lit in the display, press and hold

the

[

BND

]

button for 1 second or longer.

“

MANU” is lit in the display and manual tuning

is now available.

2. Tune into a station.

DX SEEK

When the

[ ]

button is pressed, search will be

performing in the direction of higher frequencies.

When the

[ ]

button is pressed, search will be

performed in the direction of lower frequencies.

∗ When seek tuning starts, “DX” appears in the

display.

Radio Mode Operations

Listening to the radio

1. Press the

[

SRC

]

button and select the Radio

mode, then the radio will be on.

2. To select a preset band, press the

[

BND

]

but

ton, and then select one of the preset bands

such as FM1, FM2, FM3 or AM

(

MW/LW

)

Every time the

[

BND

]

button is pressed, the

band switches in the following order:

F1 F2 F3 AM

(

MW/LW

)

F1...

3. Press the

[

]

button to tune in the

desired station.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

DX SEEK can automatically tune in to receivable

broadcast stations; LOCAL SEEK can tune in to

only broadcast stations with a good reception

sensitivity.

1. Press the

[

BND

]

button and select the desired

band

(

FM or AM

(

MW, LW

))

∗ If “MANU” is lit in the display, press and hold

the

[

BND

]

button for 1 second or longer.

“

MANU” in the display goes off and seek tuning

is now available.

∗ If “TA” is lit in the display, TP stations are auto-

matically sought.

2. Press the

[

]

button to start automatic

station tuning.

Preset memory function

Preset memory function can store up to 24 sta-

tions:

Six stations for each of FM1, FM2, FM3 and AM

(

MW/LW

)

LOCAL SEEK

If the button is pressed and held in position for

1 second or longer, local seek tuning will be en-

abled. Broadcast stations with good reception

sensitivity are selected.

∗ When local seeking starts, “LO” appears in the

display.

Quick tuning:

Press and hold the

[

]

button for 1 sec

ond or longer to begin station tuning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DB178RMP Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion DB178RMP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info