Bedienungsanleitung Clarion DB268RMP (Seite 11 von 24) (Englisch)

35326

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

280-8302-00

DB268RMP/BD269RMP/BD269RGMP 11

English

6. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switching

off the unit power or the ignition key. The unit

remembers its last volume setting. If you

switch the power off with the volume up,

when you switch the power back on, the

sudden loud volume may hurt your hearing

and damage the unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1

second or longer to turn off the power for the

unit.

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio mode ➜ CD/MP3 mode ➜ Radio

mode...

Note:

• If the CD/MP3 mode is selected when no disc is

inserted, the display shows “NO DISC”.

Adjusting the volume

Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

Setting the Z-Enhancer

This unit are provided with 3 types of sound

tone effects stored in memory. Select the one

you prefer.

∗ The factory default setting is “Z-EHCR OFF”.

Each time you press the [Z] button, the tone

effect changes in the following order:

Z-ENHANCER 1 ➜ Z-ENHANCER 2 ➜

Z-ENHANCER 3 ➜ Z-EHCR OFF ➜

Z-ENHANCER 1...

• Z-ENHANCER 1 : bass emphasized

• Z-ENHANCER 2 : treble emphasized

• Z-ENHANCER 3 : bass and treble emphasized

• Z-EHCR OFF : no sound effect

Audio mode adjustments

1. Press the [A-M] button to select the

adjustment mode. The mode switches as

follows each time the [A-M] button is

pressed:

BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous

mode

∗ When the Z-Enhancer function is turned on,

BASS (Bass) and TREB (Treble) cannot be

selected.

2. Turning the [ROTARY] knob to adjust the

selected audio mode.

BASS (Bass) : Adjustment range: –7 to +7

TREB (Treble) : Adjustment range: –7 to +7

BAL (Balance) : Adjustment range: L13 to R

FAD (Fader) : Adjustment range: F12 to

R12

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Note:

• During audio adjustment mode, if no operation is

performed for more than 7 seconds, this mode

can be cancelled and return to previous mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DB268RMP Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info