Bedienungsanleitung Clarion DB268RMP (Seite 17 von 24) (Englisch)

35326

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

280-8302-00

DB268RMP/BD269RMP/BD269RGMP 17

English

Adjusting AF

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

∗ The factory default setting is “ON”.

1. Press the [TA] button for 1 second or longer

and press [å]/[∂] button to select “AF

ON” or “AF OFF”.

2. Turning the [ROTARY] knob clockwise to “AF

ON”; turning it counterclockwise to “AF

OFF”.

∗ If the reception of the current broadcast

station deteriorates, “SEARCH” appears in the

display and the radio searches for the same

programme on another frequency.

Adjusting REG

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for that

region is received.

∗ The factory default setting is “OFF”.

1. Press the [TA] button for 1 second or longer

and press [å]/[∂] button to select “REG

ON” or “REG OFF”.

2. Turning the [ROTARY] knob clockwise to

“REG ON”; turning it counterclockwise to

“REG OFF”.

Emergency broadcast

If an emergency broadcast is received, all the

function mode operations are stopped.

“ALARM” appears in the display and the

emergency broadcast can be heard.

● Cancelling an emergency broadcast

If you press the [TA] button, emergency

broadcast reception is cancelled.

Volume setting of TA, emergency

broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts

can be set during TA, ALARM or PTY interrupt.

∗ The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, turn the

[ROTARY] knob clockwise or counterclockwise

to set the volume to the desired level (0 to 33).

∗ When the TA, ALARM or PTY interrupt ends, the

volume returns to the level it had before the

interrupt.

RDS Operations

CD Mode Operations

Loading a CD

Insert a CD into the center of the CD insertion

slot with the labeled side facing up. “LOADING”

appears in the display, the CD enters into the

slot and start playing.

Notes:

• Do not put your hand, fingers, or foreign objects

into the CD insertion slot.

• If a CD has already been loaded, another CD

cannot be inserted. Do not insert another one

forcefully.

• Discs not bearing the mark cannot be

played with the unit. CD-ROMs cannot be played.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

Listening to the disc already

inserted

Press the [SRC] button to select the CD/MP3

mode, the CD will start playing.

Stopping (Pausing) playback

While the CD playing, pressing the [ ] button

will stop the CD and “PAUSE” indicate.

Press the [ ] button again to resume

playback.

Ejecting the CD

Press the [Q] button, then the CD will be

ejected.

Note:

• If the ejected CD is left as it is, it will be reloaded

after 15 seconds.

Top function

Press the [BND] button, then the CD will start

playing from the first song (track number 1).

∗ For MP3 mode, it will start playing from the first

song of current folder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DB268RMP Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info