580538
14
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
English
14
DXZ378RMP/DXZ379RMP
Radio Operations
Listening to the radio
1. Press the [
SRC
] button and select the radio
mode. The frequency or PS and PTY
appears in the display.
PS: Programme service name
PTY: Programme type
2. Press the [
BND
] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM1
FM2
FM3
AM (MW/LW)
FM1...
3. Press the [
x
] or [
v
] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [
BND
] button and select the
desired band (FM or AM (MW/LW)).
2. Tune into a station.
If “
MANU
” is lit in the display, press and hold
the [
BND
] button for 1 second or longer.
MANU
” in the display goes off and seek
tuning is now available.
If “
TA
” is lit in the display, TP stations are
automatically sought.
DX SEEK
Press the [
x
] or [
v
] button to automatically
seek a station.
When the [
v
] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
x
] button is pressed, the station is sought
in the direction of lower frequencies.
When seek tuning starts, “
DX SEEK
” appears in
the display.
LOCAL SEEK
If the [
x
] or [
v
] button is pressed and held
in position for 1 second or longer, local seek
tuning will be enabled. Broadcast stations with
good reception sensitivity are selected.
When local seeking starts, “
LO SEEK
” appears in
the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [
BND
] button and select the
desired band (FM or AM (MW/LW)).
If “
MANU
” is not lit in the display, press and
hold the [
BND
] button for 1 second or longer.
MANU
” is lit in the display and manual tuning
is now available.
2. Tune into a station.
Quick tuning
Press and hold the [x] or [v] button for 1
second or longer to tune in a station.
Step tuning
Press the [x] or [v] button to manually tune
in a station.
If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
DXZ378RMP_EN.book 14 ページ 2006年11月27日 月曜日 午後2時22分
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clarion DXZ378RMP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info