Bedienungsanleitung Clarion DXZ555MP (Seite 19 von 25) (Englisch)

580425

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

280-8143-00

DXZ555MP 21

English

Operations Common to Each Mode

● Adjusting the display contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “5”.

2-1. Select “CONTRAST”.

3-1. Turn the [ROTARY] knob to select from 1-8.

To change other settings

1. Press the [ADJ] button to switch to the

adjustment selection display.

2. Press the [a, d] lever upward or

downward to select the “item name”.

Each time the [a, d] lever is pressed up/

down, the item display changes in the

following order:

“BLINK LED” ↔ “AMP CANCEL” ↔ “AUX

SENSE” ↔ “SYS CHK”

3. Turn the [ROTARY] knob to select the

“desired setting item”.

∗ After completing settings, press the [ADJ]

button to return to the previous mode.

● Anti-theft indicator

The red Anti-theft indicator is a function for

preventing theft. When the DCP is removed

from the unit, this indicator blinks.

∗ The factory default setting is “OFF”.

2-1. Select “BLINK LED”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

● Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “AMP CANCEL”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

• ON:

Use with connected AMP.

• OFF:

Use with inside AMP.

● Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

∗ The factory default setting is “AUX MID”.

2-1. Select “AUX SENSE”.

3-1. Turn the [ROTARY] knob to select “AUX

LOW”, “AUX MID” or “AUX HIGH”.

● Performing a system check

This function allows you to perform a system

check from the adjust mode when required.

2-1. Select “SYS CHK <E>“.

3-1. Press and hold the [ ] button for 1

second or longer.

“SYSTEM CHK” appears in the display,

then the unit returns to the previous

operation mode.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be

entered for each mode are as follows.

1. Press the [SRC] button to select the mode

you want to enter a title (TUNER, CD, CD

changer or TV).

2. Select and play a CD in the CD changer or

tune in to a TV station or TUNER for which

you want to enter the title.

3. Press the [D] button and display the title

display.

4. Press and hold the [T] button for 1 second or

longer.

The display switches to the title input display.

5. Press the [a, d] lever upward or downward

to move the cursor.

6. Press the [BND] button to select a character.

Each time you press the [BND] button, the

character changes in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜

Capital letters…

7. Turn the [ROTARY] knob to select the

desired character.

8. Repeat steps 5 to 7 to enter up to 10

characters for the title.

9. Press and hold the [ ] button for 2

seconds or longer to store the title into

memory and cancel title input mode.

CD changer mode Number of titles

DCZ625 connected 100 titles

CDC655Tz connected 100 titles

Mode Number of titles

CD mode 50 titles

TV mode 20 titles

Tuner mode 30 titles

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DXZ555MP Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info