Bedienungsanleitung Clarion DXZ588RUSB (Seite 27 von 328) (Englisch)

580431

Zoom out

Zoom in

Vorherige Seite

1/328

Nächste Seite

English

27 DXZ588RUSB

Operations Common to Each Mode

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “7”. (Adjustment

level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Press the [UP] or [DN] button to adjust the

contrast.

● Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [UP] or [DN] button to select the

setting.

“ON” ↔ “OFF”

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “WELCOME TO

CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [MENU] button for 1

second or longer to clear the old message.

3-3. Push the [SEEK PANEL] leftward or

rightward to move the cursor.

3-4 Press the [MENU] button to select a

character type. Each time you press the

[MENU] button, the character type changes

in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters...

3-5. Press the [UP] or [DN] button to select the

desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

3-7. Press and hold the [ ] button for 2

seconds or longer to store the message in

memory and cancel the input message

mode.

∗ Press and hold the [MENU] button for 1

second or longer to cancel the input

message. Then press and hold the

[] button for 2 seconds or longer to

store the message and the message return

to the default setting.

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC

title.

∗ The factory default setting is “ON”.

2-1. Select “AUTO SCR”.

3-1. Press the [UP] or [DN] button to select

“ON” or “OFF”.

•ON:

To scroll automatically.

• OFF:

To scroll just 1 time.

∗ When you want to see the title again, in the

title mode, press and hold the [D] button for

1 second or longer to scroll the title.

To change adjustment setting

1. Press and hold the [OPTION] button for 1

second or longer to switch to the

adjustment selection display.

2. Push the [SEEK PANEL] leftward or

rightward to select the “item name”.

“CONTRAST” ↔ “SCRN SVR” ↔

“MESSAGE INPUT” ↔ “AUTO SCR” ↔

“SCRL SPD”’ ↔ “DIMMER” ↔

“BLINKLED” ↔ “A CANCEL” ↔ “TEL-

SEL” ↔ “TEL SP” ↔ “TEL SW” ↔

“SYSTEM CHECK”

3. Press the [UP] or [DN] button to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [] button to adjust

the setting value.

∗ After completing settings, press the

[OPTION] button to return to the previous

mode.

01_DXZ588RUSB_EN.book 27 ページ２００７年１１月２７日　火曜日　午後６時５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DXZ588RUSB Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info