Bedienungsanleitung Clarion FZ102E (Seite 12 von 17) (Englisch)

580543

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

English

FZ102E

7. AUXILIARY INPUT

ADJUSTMENT MODE

AUX mode

1. Connect the external music player to the

AUX input.

2. Push the [

] rotary knob select AUX

mode.

This system has an external jack input in the front

panel where you can listen to sounds and music

from external devices connected to this unit.

Notes:

Use only the 3.5mm stereo jack for the AUX jack

input.

Volume can be adjusted through the unit.

Remove the audio jack from AUX input during AUX

mode will not revert to Radio mode automatically.

Note:

For some countries, RDS (Radio Data System) broad-

casting is not supported. It is recommended to turn o

all the RDS settings.

1. Press longer the [DISP] button to enter adjust-

ment selection display.

2. Press the [

] / [ ] button to select the Item

name.

(“AF”

“REG” “PTY” “PTY-SEL”)

“CLOCK” “12/24 HR” “CLK ADJ”

“SCROLL” “RESET” “AF”…

Notes:

Items in bracket (PTY, PTY SEL, AF and REG)

are known as RDS Mode adjustment. It will only

be available for selection during Radio mode FM

band.

“PTY-SEL” is available only when “PTY ON”.

“REG” is available only when “AF ON”.

Setting Regional (REG)

1. Select “REG”.

2. Turn the [

] rotary knob to select “ON”

or “OFF”.

Notes:

When the REG function is ON, the optimum re-

gional station can be received. When this function

is OFF, if the regional station area switches as you

drive, a regional station for that region is received.

The factory default setting is “OFF”.

This function is disabled when a national station

such as BBC R2 is being received.

The REG function ON/OFF setting is valid when

the AF function is ON.

Setting alternate frequency (AF)

1. Select “AF”.

2. Turn the [

] rotary knob to select “ON”

or “OFF”.

Notes:

The AF function switches to a dierent frequency

on the same network in order to maintain optimum

reception.

The factory default setting is “OFF”.

If the reception of the current broadcast station de-

teriorates, “SEARCH” appears in the display and

the radio searches for the same programme on

another frequency.

Cancelling a PTY interrupt broadcast

Press the [TA] button during the PTY interrupt

broadcast.

Setting Programme Type (PTY)

1. Select “PTY”.

2. Turn the [

] rotary knob to select “ON”

or “OFF”.

Notes:

This function enables you to listen to a broadcast

of the selected programme type even if the unit is

on a function mode other than radio.

Some countries do not yet have PTY broadcast.

In the TA standby mode, a TP station has priority

over a PTY broadcast station.

The factory default setting is “OFF”.

PTY SEEK

During PTY item display, press the [ ]

[ ]

button to search for a PTY broadcast.

Note:

If no station with the selected PTY broadcast can

be received, the unit returns to the previous receiv-

ing station.

FZ102E_Owner_manual.indb 12 7/24/2012 9:55:21 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion FZ102E Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion FZ102E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info