Bedienungsanleitung Clarion FZ502E (Seite 5 von 16) (Englisch)

580546

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

English

FZ502E

CT (Clock Time) display

• The displayed clock data is based on the

CT (clock time) data in the RDS signal.

Volume adjustment

Turn the [CONTROL] knob on the front

panel or press the [

] or [ ] button on the

remote control.

The adjustable range of volume is 0 to 40.

CAUTION

While driving, keep the volume level at

which external sounds can be heard.

Playing source selection

Press [CONTROL] button on the front

panel or [SRC] button on the remote control

repeatedly to choose desired playing source.

Notes:

• Playing source selection means selecting

work mode, such as RADIO mode and

AUX mode, etc.

Display system time

Press the [DISP] button on the remote

control to switch the display information from

clock, station information (RADIO mode), or

track information (USB mode).

RESET

If you have below problems, pls press

[RESET] button.

• Unit can not power on

• Nothing happens when buttons are pressed

• Display is not accurate

Note:

• When the [RESET] button is

pressed,preset radio stations, audio

setting,etc. stored in memory are cleared.

* You entered ”CODE” is not cleared.

4. OPERATIONS

Basic Operations

Note:

• Refer to the diagrams in “3. CONTROLS”

when reading this chapter.

CAUTION

When the unit is turned on, starting and

stopping the engine with its volume

raised to the maximum level may harm

your hearings.

Be careful about adjusting the volume.

Power on / off

Notes:

• Start the engine before using this unit.

• Be careful about using this unit for a long

time without running the engine. If you

drain the car’s battery too far, you may not

be able to start the engine and this can

reduce the service life of the battery.

1. Start the engine. The power button / knob

illumination on the unit will light up.

Engine ON

position

2. Press the [CONTROL] knob on the front

panel to turn on the power under standby

mode. The unit goes back to the last

status after power on.

3. Press and hold the [CONTROL] knob

(center long press) on the front panel,

and rotate the [CONTROL] knob choose

POWER OFF, then press the [CONTROL]

knob on the front panel to turn off the

power.

Mute

Press the [MUTE] button on the remote

control to mute the volume from the unit.

Note:

Doing the operation above again or adjusting

volume will release muting.

RESET

In any mode, press and hold [CONTROL]

knob (center long press), and rotate the

[CONTROL] knob choose ADJUST, then

press the [CONTROL] knob to enter system

setup. Press [CONTROL] knob (left / right) to

select options, rotate the [CONTROL] knob to

adjust.

TA: ON/OFF

Rotate the [CONTROL] knob to choose TA

ON or OFF.

• ON:

“TA” indicator appears in the display lights

and TA function turns on.

• OFF:

“TA” indicator disappears in the display and

TA function turns off.

AF: ON/OFF (RADIO mode)

Rotate the [CONTROL] knob to choose AF

ON or OFF.

• ON:

“AF” indicator appears in the display lights

and AF function turns on.

• OFF:

“AF” indicator disappears in the display and

AF function turns off.

REG: ON/OFF (RADIO mode AF on)

Rotate the [CONTROL] knob to choose REG

ON or OFF.

• ON:

“REG” indicator appears in the display lights

and Regional function turns on.

• OFF:

“REG” indicator disappears in the display

and Regional function turns off.

DX/LO (RADIO mode)

Rotate the [CONTROL] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can

be received.

• DX: Stations with strong and weak signals

can be received.

PTY (Programme Type) MODE (RADIO

mode)

Press [CONTROL] knob, then rotate the

[CONTROL] knob to select PTY type,

press the [CONTROL] knob, the unit begin

searching.

System Setup

PTY type: NEWS -> AFFAIRS -> INFO

-> SPORT -> EDUCATE -> DRAMA ->

CULTURE -> SCIENCE -> VARIED -> POP

M -> ROCK M -> EASY M -> LIGHT M ->

CLASSICS -> OTHER M -> WEATHER

-> FINANCE -> CHILDREN ->SOCIAL ->

RELIGION -> PHONE IN -> TRAVEL ->

LEISURE -> JAZZ ->COUNTRY -> NATION

M -> OLDIES -> FOLK M -> DOCUMENT ->

TEST ->ALARM

CALL LIST (BT mode)

Rotate the [CONTROL] knob to choose:

• DIAL NUMBER

• DIALED CALL

• MISSED CAL

• RECEIVED CALL

• USER PHONEBOOK

and press [CONTROL] knob to conrm.

PCH MEMO (RADIO mode)

Rotate the [CONTROL] knob to choose PCH

1 / PCH 2 / PCH 3 / PCH 4 / PCH 5 or PCH 6,

press and hold [CONTROL] knob (center long

press) to store it in the memory.

AUX SENS (AUX mode)

Rotate the [CONTROL] knob to choose AUX

input sensitivity LOW, MID or HIGH at AUX

mode.

SELECT (BT mode)

This ”SELECT” menu is intended to

automatically paired by selecting a mobile

phone was stored.

This unit can store three mobile phones. The

mobile phone will be stored in paired order

to the unit. The mobile phone can be stored

up to three. The fourth mobile phone can not

be stored. If you want to store a fourth mobile

phone, please delete unwanted mobile phone

from ”DELETE” menu.

1. Rotate the [CONTROL] knob to choose

the pair mobile phone name from the

pairing list.

2. Press the [CONTROL] knob to conrm.

DELETE (BT mode)

1. Rotate the [CONTROL] knob to choose

the paired mobile phone name from the

pairing list.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion FZ502E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion FZ502E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info