Bedienungsanleitung Clarion M303 (Seite 5 von 60) (Englisch)

580430

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

USB Port

• Th e U SB m e mo ry s t ic ks mu s t be

recognized as “USB mass storage class”

to work properly. Some models may not

operate correctly.

When the memorized data is lost or

damaged by any chance, Clarion shall

not be liable for any damage.

When using the USB memory stick, we

recommend that you backup your data

stored on it before using a personal

computer etc.

• Data les may be broken when using USB

memory sticks in the following situation:

When disconnecting the USB memory

stick or turning the power off during

reading data.

When affected by static electricity or

electric noise.

Connect/disconnect the USB memory stick

when it is not accessed.

• Connecting with the computer is not

covered.

Front Panel / Generalities

For a longer service life, be sure to read the

following cautions.

• Do not allow any liquids on the unit from

drinks, umbrellas, etc. Doing so may

damage the internal circuitry.

• Do not disassemble or modify the unit in

any way. Doing so may result in damage.

• Do not let cigarettes burn the display.

Doing so may damage or deform the

body.

• If a problem should occur, have the unit

inspected at your store of purchase.

• The remote control unit may not work if

the remote control sensor is exposed to

direct sunlight.

Remove the DCP

The control panel can be detached to prevent

theft. When detaching the control panel, keep

it in the safety place and prevent scratches.

W e r e c o m m e n d t a k i n g t h e D C P

(DETACHABLE CONTROL PANEL) with you

when leaving the boat.

1. Press the [SRC / ] button (1 sec.) to turn

off the power.

2. Deeply push in [OPEN] button to unlock

the DCP.

3. Hold the side popped out, remove the

DCP.

Attach the DCP

1. Hold the DCP and ensure that the panel

faces towards you. Set the right side of the

DCP into the DCP bracket.

2. Press the left side of the DCP until it locks.

INFORMATION FOR USERS:

Changes or modifications to this product

unapproved by the manufacturer will void the

warranty and will violate FCC approval.

Cleaning the body

• Use a soft, dry cloth and gently wipe off

any dirt or dust.

• For tough dirt, apply some neutral

detergent diluted in water to a soft cloth,

wipe off the dirt gently, then wipe again

with a dry cloth.

• Do not use benzene, thinner, boat cleaner,

etc., as these substances may damage

the body or cause the paint to peel. Also,

leaving rubber or plastic products in

contact with the body for long periods of

time may cause stains.

Hold the DCP, as shown in the gure below,

and put it into the supplied DCP case.

Storing the DCP in the DCP Case

CAUTION

• The DCP can easily be damaged by shocks.

After removing it, be carefully not to drop it or

subject it to strong shocks.

• Once the [OPEN] button is pressed and DCP

is unlocked, vibrations can cause the DCP to

fall.

• The connector for the main unit and DCP

is extremely important. Be careful not to

damage it by pressing on it with fingernails,

screwdrivers, etc.

Note:

If the DCP is dirty, wipe off the dirt with a soft,

dry cloth only.

DCP case

DCP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion M303 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info