Bedienungsanleitung Clarion M502 (Seite 8 von 55) (Englisch)

580548

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

English

M502

System Setup

SOUND

Press the [CONTROL] knob to choose

SOUND. First press shows current EQ. Rotate

the [CONTROL] knob to choose BEAT EQ in

this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

To change CUSTOM setting, and press

the [CONTROL] knob (center), then press

[CONTROL] knob (right/left) to select EQ

effects including: BASS-G -> BASS-F ->

BASS-Q -> MID-G -> MID-F -> MID-Q

-> TREBLE-G -> TREBLE-F, rotate the

[CONTROL] knob to select a value.

BASS-G / MID-G / TREBLE-G: (-7)- (+7)

BASS-F: 50 / 100 / 200

BASS-Q : 0.7 / 1.0 / 1.4 / 2.0

MID-F: 500 / 1 K / 2 K

Audio Setup

MID-Q: 0.7 / 1.0 / 1.4 / 2.0

TREBLE-F: 5 K / 10 K / 15 K

TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0

Then press the [CONTROL] knob (left / right) to

select USER preset including:

BALANCE -> FADER -> M-B EX ->HPF(high

pass lter) -> LPF(low pass lter) -> S-W VOL

(Subwoofer Volume), rotate the [CONTROL]

knob to select a value.

BALANCE:LEFT 1-7->CENTER->RIGHT 1-7

FADER:FRONT 1-7->CENTER->REAR 1-7

M-B EX: ON/OFF

HPF: THROUGH/60/90/120

LPF: THROUGH/60/90/120

SUBW VOL: (-6)-(+6)

Radio Operations

Select tuner as playing source

Press the [CONTROL] knob or [SRC / ]

button on the remote control to switch to the

RADIO source.

Select one radio band

Press the the [CONTROL] knob (up long

press) on the panel or [BAND/TOP] button

on the remote control to select one radio

band among FM1, FM2, FM3 and AM.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press [CONTROL] knob (left/right) on the

panel or [

, ] buttons on the remote

control to tune in a higher / lower station.

Auto tuning

Press and hold [CONTROL] knob (left/right)

on the panel or [

, ] buttons the remote

control to seek a higher / lower station.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

in preset memory in order. This function is

useful when searching for a desired station

in memory.

1. Press the [SCN/PS/AS] button on the

remote control.

2. When a desired station is tuned in, press

the [SCN/PS/AS] button on the remote

controlagain to continue receiving that

station.

Note:

Be careful not to press and hold the

[SCN/PS/AS] button, otherwise the auto

store function is engaged and the unit starts

storing stations.

Auto store

Only stations with sufcient signal strength will be

detected and stored in the memory.

Press and hold the [SCN/PS/AS] button on the

remote control to start automatic station search.

To stop auto store, press other buttons having

radio functions.

Notes:

1. After auto store, the previous stored stations

will be overwritten.

2. The unit has 4 bands, such as FM1, FM2,

FM3 and AM. FM3 and AM can store by AS

function. Each bands can store 6 stations,

M502 can store 24 stations in total.

Manual store

When one expected radio station has been

detected, press and hold number button on the

remote control 1-6 to store it in the memory.

Recall the stored stations

Press one numeric button among 1 to 6 on the

remote control or on the panel to select the

corresponding stored station.

Local seeking

When LOCAL seeking is on, only those radio

stations with strong radio signal could be

received.

Refer to System Setup page 7.

Note:

The number of radio stations that can be received

will decrease after the local seeking mode is on.

S-CTRL (iPod mode) : ON/OFF

Rotate the [CONTROL] knob to choose S-CTRL

(Simple control) ON or OFF.

* Refer to P12.

RESET

1. Select ”RESET”.

2. Press and hold the [CONTROL] knob to

reset.

3. Settings will be set to the default value.

4. The unit will be turned off automatically.

Note:

• When the [RESET] is selected and you

press and hold the [CONTROL] knob, radio

station frequencies, titles, and other data

stored in memory are cleared.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion M502 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info