Bedienungsanleitung Clarion MAX678RVD (Seite 23 von 77) (Englisch)

580549

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

Basic Operations

MAX678RVD

English

Owner’s manual

Mobile phone interrupt setting

When you connect your mobile phone to this unit

using a separately sold cable, you can listen to

your telephone calls on your car speakers.

• The factory default setting is “OFF”.

Note:

• This function is not compatible with all mobile

telephones. Contact your local authorized Clarion

dealer for information on proper installation and

compatibility.

• When you set this function to “OFF”, disconnect

the mobile phone from the cable or turn off the

power of the mobile phone.

Setting the voice input line for the

mobile phone

When you connect your mobile phone to this unit,

select the connection method of the adaptor box.

• The factory default setting is “CeNET”.

Note:

• When setting to “AUX”, the VISUAL mode is

altered to the ACCESSORY mode.

Switching CONNECT (connect)

Make the following settings when an external

device is connected to the Visual terminal.

Note:

• This function is not available when the Clarion

navigation system (NAX963HD) is connected.

• When the navigation system is connected, use the

monitor lock function. Locking the monitor locks

the screen size in F.WIDE mode (full wide), and

the VTR system to NTSC if the CONNECT item is

set to [COMPOSITE].

Selecting the PTY display language

See the section entitled “Switching the PTY

display language” (page 36).

Linking AF functions in the RDS and

DAB modes

See the section entitled “AF function between

RDS and DAB” (page 33).

3-1. Touch the []] key to display the next menu

screen.

3-2. Touch the [ON], [OFF] or [MUTE] key of the

TEL SWITCH item to set to “ON”, “OFF” or

“MUTE”.

ON:

You can listen to your telephone calls from

the speakers connected to this unit.

* When listening to your calls on your car

speakers, you can adjust the volume using

the [+]/[–] buttons.

OFF:

This unit continues normal operation even

when you use the mobile phone.

MUTE:

The sound from this unit is muted during

telephone calls.

3-1. Touch the [C] key to display the next menu

screen.

3-2. Touch the [CeNET] or [AUX] key of the TEL

SELECT item to set to “CeNET” or “AUX”.

CeNET:

Selects when the adaptor box (BLT433) is

connected via the CeNET.

AUX:

Selects when the adaptor box (BLT373) is

connected to Audio (left/right) of the Visual

input terminal.

RGB:

Select when the Clarion navigation system

(NAX943DV, NAX9500E) is connected.

COMPOSITE:

Select when a navigation system of the other

manufacturer is connected.

OTHERS:

Select for external devices other than a

navigation system.

NONE:

Select when no external device is connected.

• The factory default setting is “NONE”.

3-1. Touch the [C] key to display the next menu

screen.

3-2. Touch the []] key of the CONNECT item to

display the CONNECT screen.

3-3. Touch the [RGB], [COMPOSITE],

[OTHERS] or [NONE] to set the function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion MAX678RVD Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info