Bedienungsanleitung Clarion MAX973HD (Seite 27 von 187) (Englisch)

580438

Zoom out

Zoom in

Vorherige Seite

1/187

Nächste Seite

MAX973HD

English

Setting the Destination and Starting the Route

Guidance

Set Location menu

From the Set Location menu displayed when

setting the searched place as the destination,

you can perform the following operations

according to the conditions:

Note:

• The name of the road close to the cursor is

displayed at the bottom of the screen.

• For the 2D maps, the road that will be set as

destination blinks when the map scale is 200 m(1/

8 mile) or smaller. When you set the following

places as the destination, confirm the position of

the blinking road:

• Place where roads of ascending and

descending have diverged

• Place near the intersection of overpass

• Place where no road exists in the vicinity

Set Route menu

When you enter the destination, the Set Route

menu is displayed with the map showing the

suggested routes. You can perform the following

operations from this screen according to the

situation:

Note:

If approx. 30 seconds pass without touching any key

after this screen is displayed, the route guidance will

be automatically started.

[Start] key:

Starts the route guidance to the destination.

[More Routes] key:

You can change to other suggested routes with a

different priority condition. You can also set this

from the Route menu. ➜ “Selecting another

route” (P. 35)

•[Shortest Time]

Shows the route of which the required driving

time is shortest.

•[Minimize M-way]

Shows the route of which motorways are not

used as much as possible.

•[Shortest Distance]

Shows the route of which the distance is

shortest.

•[OK]

Changes to the specified route.

[Route Info] key:

Shows the information of the suggested route

selected on the screen.

•[Preview]

You can confirm the route from the map.

Touching the [F] key scrolls the map so that

the cursor moves along the travelling direction

of the suggested route. Touching the [R] key

scrolls the map so that the cursor moves to the

opposite direction of travelling along the

suggested route. Touching the [G] key stops

scrolling temporarily.

[OK] key:

Sets the location shown by the “ ”on the map

as the destination.

[Add to Route] key:

When a destination is already set, you can set the

location of the “ ” as a waypoint. Specify the

order of passing when setting the location as a

waypoint. ➜ “Editing the route” (P. 33)

[Nearby POI] key:

You can search for a place of the specified

category around the location of the “ ”, and set

it as the destination. The searching procedure is

similar to the procedure for POI search. ➜ “By

Nearby POI” (P. 23)

[POI Info] key:

When the navigation system has information

concerning the searched location, you can

display this information by pressing the [POI Info]

key.

[Store Location] key:

[ ] key:

Touching this key changes the map to the map

scrolling screen. You can adjust the location of

the searched place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion MAX973HD Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info