Bedienungsanleitung Clarion MAX973HD (Seite 160 von 187) (Englisch)

580438

160

Zoom out

Zoom in

Vorherige Seite

1/187

Nächste Seite

General Settings

MAX973HD

English

Owner’s manual

“Time Zone”:

Sets the time zone. You can select from the

list of 74 regions including the [Auto] key.

When you select the [Auto] key, the clock is

automatically switched to the time zone of the

country at the vehicle position.

Changing Skin

You can change the screen design by using the

skin data stored in the hard disk drive.

1. Touch the [Select] key of the “Skin Change”

item.

2. Touch the desired item key you wish to set.

Note:

• This operation is disabled while recording a CD or

loading/ejecting a disc.

Beep Sound

You can turn ON/OFF the beep sounds and

menu operation sounds.

Keyboard Type

You can change the keyboard layout used for

name entry.

1. Touch the item key of the “Keyboard” item.

2. Select the keyboard type by touching one of

the following keys:

[ABCDEF] key

[QWERTY] key

[QWERTZ] key

[AZERTY] key

Voice Recognition

You can turn ON/OFF the voice recognition

feature (optional). When you touch the [OFF]

key, the voice recognition is not available.

Voice Feedback

You can turn ON/OFF the voice feedbacks which

are responded when using voice commands.

Blinking LED

When this function is set to “ON”, the Blinking

LED indicator will blink when the power is turned

off.

Antenna

Select the [Antenna] when an antenna, which is

extended automatically, is used. Otherwise,

select the [Others].

Security Mode

To set this function ON, setting a PIN code

(called as “Personal Code”) is required. When

you set your Personal Code, a theft is prevented

by disabling the operation of the unit.

In addition, set the Blinking LED function to “ON”

to improve the effect of this function.

Setting the Security Mode

1. Touch the [ON] key of the Security Mode item.

The Set Code screen appears.

2. Enter your desired 4-digit Personal Code by

using Ten-Key pad displayed on the screen,

then touch the [OK] key.

• Touch the [ ] key when you make a

mistake in entering.

3. Enter the same Personal Code again for

confirmation, then touch the [OK] key.

The entered Personal Code will be set, and it

will return to the previous screen.

Resetting the Security Mode

1. Touch the [OFF] key of the Security Mode

item.

The Erase Code screen appears.

2. Enter your 4-digit Personal Code by using

Ten-Key pad, then touch the [OK] key.

The message “Code erased” appears, and it

will return to the previous screen.

Personal Code entry

The Personal Code screen will be displayed

when turning the power on after performing the

following operations:

• The car battery was replaced.

• The backup power was cut off.

• The Reset button was pressed.

Note:

• If you forgot your Personal Code, please consult

your dealer or an authorized service centre.

1. Enter your Personal Code currently set.

When the correct Personal Code is entered,

the unit will restart from the initial startup

screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion MAX973HD Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info