Bedienungsanleitung Clarion NAX983HD (Seite 38 von 98) (Englisch)

473612

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Notes on the Route Guidance

NAX983HD

English

Selecting another route

Changes the current route to another suggested

route with different priority conditions.

Note:

When waypoints are set, this operation is disabled.

1. Touch the [More Route] key.

The More Route menu screen is displayed.

2. Touch the desired priority condition you wish

to confirm.

The route of the specified priority condition is

highlighted on the map.

[Shortest Time]

Shows the route of which the required time is

shortest.

[Minimise M-way]

Shows the route of which motorways are not

used as much as possible.

[Shortest Distance]

Shows the route of which the distance is

shortest.

3. Touch the [OK] key.

The Set Route menu screen is displayed.

Touching the [Start] key starts the route

guidance with the route you have selected.

Storing the track travelled

You can register the track which is the travelled

path on the vehicle up to the current car position.

Note:

The track is automatically recorded from the place of

departure up to 100 km, and the current tracking

from the current location up to 20 km can be

registered for up to five tracks. You can select

whether to display track traveled or not, and you can

also register/edit it from the [Navigation] or the

[Stored Data] of the navigation settings. ➜

“Tracking Display Settings” (P. 47).

1. Touch the [Store Tracking] key.

A confirmation screen is displayed. Touching

the [Yes] key stores the current track.

Notes on the Route Guidance

• When you enter the destination, be sure to stop

the vehicle in a safe place.

• The displayed route is only a suggested route.

• Roads can change every day, and may have

changed in geometries and traffic regulations

from the date the map data is created. Be sure

to follow the actual traffic regulations.

• It may take a little time until the suggested route

is displayed according to the situation.

• When the destination is entered, the current

location map screen is displayed. When you

set a remote position from the vehicle position

as the starting point, the route may not be

displayed on the screen.

• Roads where the vehicle cannot pass, such as

roads in housing areas site or in installations,

and roads under construction, and places

where vehicles cannot pass, may be included

in the suggested route.

• The passed waypoints are not included for

route recalculation.

• When you set waypoints, the system calculates

the routes between every point. Therefore, the

following notes apply:

• If a route between certain waypoints is not

found, no route may be displayed.

• The route may not be connected in the

vicinity of a waypoint.

• A U-turn may be required at a waypoint.

• The route calculation may not be completed in

the following cases:

• If there is no main road within a range of

approx. 5 km (3 miles) from the current

location.

• If there is no main road within a range of

approx. 5 km (3 miles) from the destination

(or waypoints).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion NAX983HD Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion NAX983HD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info