Bedienungsanleitung Clarion NX501 (Seite 38 von 159) (Englisch)

580418

Zoom out

Zoom in

Vorherige Seite

1/159

Nächste Seite

38 NX501/NZ501

English

Owner’s Manual

4. Touch your desired Device and press the[ ]

key to register for the Bluetooth audio player..

5. If entering the Pass Key code is prompted on your

Bluetooth audio player, enter the Pass Key code set

to this unit.

• You can change the Pass key setting of this unit

from the BT Info screen.

• You also can add the favorite icon to the connected

device. There are 10 favorite icons for selection.

When the pairing operation completes, the registered

Bluetooth audio player is set as the current device,

after selecting the favorite icon, the display return to

the device list screen. Press [

] button, the display

will return to the Bluetooth audio mode screen.

Note:

• You cannot register the same Bluetooth audio player

which is already registered.. If you wish to change the

Device key registered, once delete the corresponding

Bluetooth audio player from the previous Device key, and

then register it again to your desired Device key.

• To delete the Bluetooth audio player registration

1. Touch the [

] key to delete the device.

A conﬁrmation screen is displayed.

2. Touch the [

] key to conﬁrm delete.

Selecting the Bluetooth audio player

To change the current Bluetooth audio player to the

other device which is already registered, perform the

following operation.

1. Touch the Device key to [

] display the Device

Select screen.

2. Touch the currently connected device, then press

the [

] key to disconnect the active device.

3. Touch the desired Device key you wish to use.

Press [

] key to select it as your active device.

The corresponding cellular phone is set as current

telephone.

• If the power of the cellular phone is not turned on,

turn it on.

• The cellular phone may prompt to acknowledge the

Bluetooth connection or ask to enter the Pass Key

code of this unit.

Perform these operations according to the message

displayed.

4. Touch the [

] key to return to the previous

screen.

Controlling the Bluetooth audio player

Note:

• Occasionally, depending on the environment, playback

sounds may be fragmented, or switch noises may be

generated.

Playing a music

After the connection with a Bluetooth audio player is

established, the play mode is automatically engaged.

• When playback is not started for some devices,

touch the [

] key manually.

Pausing playback

1. Touch the [ ] key during playback.

Playback pauses.

2. To resume playback, touch the [ ] key. Playback

resumes.

Skipping a track (searching)

3. Press the [ ] or [ ] button during playback.

Tracks are skipped, as many as the times the button is

pressed, and playback starts.

Stopping playback

4. Press the [ ] button during playback.

Tracks are stopped, press the [ ] button to playback

the ﬁrst Track.

NX_NZ501北美版说明书.indd 38 2011-1-19 17:36:26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion NX501 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info