473613
22
Zoom out
Zoom in
Vorherige Seite
1/123
Nächste Seite




































NX501E
N
Z
501E
Owner’s manual & Installation manual
Mode d’emploi et manuel d’installation
Benutzerhandbuch und Montageanleitung
Manuale dell’utente e manuale di installazione
Gebruikershandleiding en installatiehandleiding
Manual de instrucciones y de instalación
Bruksanvisning och installationsanvisning
Podręcznik użytkownika i podręcznik instalacyjny
Εγχειρίδιο λειτουργίας & Εγχειρίδιο εγκατάστασης
3NX501E/NZ501E
English
English
Owner’s Manual
Contents
1. FEATURES ...........................................................................................................5
Expanding Systems ..............................................................................................5
2. PRECAUTIONS ....................................................................................................6
3. CAUTIONS ON HANDLING.................................................................................8
Operation Panel ....................................................................................................8
USB Port ...............................................................................................................8
Cleaning ................................................................................................................8
Handling Discs ......................................................................................................9
4. PANEL CONTROLS ...........................................................................................10
NX501E Functions of Buttons .............................................................................10
NZ501E Functions of Buttons .............................................................................11
5. REMOTE CONTROL..........................................................................................13
Functions of Remote Control Buttons ................................................................14
6. MAIN MENU OPERATIONS ..............................................................................16
Front Zone Source ..............................................................................................16
Rear Zone Source ...............................................................................................16
7. DVD SYSTEM ....................................................................................................17
DVD Video Features ............................................................................................17
Discs ...................................................................................................................17
About the registered marks, etc. ........................................................................18
8. DVD VIDEO PLAYER OPERATIONS .................................................................19
Change DVD System Settings ............................................................................19
Watching to a disc ..............................................................................................20
Operate the DVD Player menu ............................................................................20
Operate the Video files Player menu ...................................................................23
9. DVD AUDIO PLAYER OPERATIONS ................................................................24
Showing CD Player mode screen .......................................................................24
Operate the CD Player menu ..............................................................................24
Listening To MP3/WMA ......................................................................................25
10. USB AUDIO OPERATIONS .............................................................................28
Notes on using USB memories ...........................................................................28
Select USB Audio mode .....................................................................................28
Playing MP3/WMA files in USB memory ............................................................29
11. USB VIDEO OPERATIONS ..............................................................................31
Notes on using USB memories ...........................................................................31
Select USB Video mode .....................................................................................31
Playing video files in USB memory .....................................................................31
USB Video Menu Operations ..............................................................................32
12. iPod/iPhone OPERATIONS .............................................................................33
Notes on using Apple iPod/iPhone .....................................................................33
Controlling the iPod/iPhone ................................................................................33
Selecting the iPod Video mode...........................................................................35
13. Bluetooth AUDIO PLAYER OPERATIONS .....................................................37
Selecting the Bluetooth Audio mode ..................................................................37
Bluetooth audio player settings ..........................................................................37
Registering your Bluetooth audio player (Pairing)...............................................37
Selecting the Bluetooth audio player ..................................................................38
Controlling the Bluetooth audio player ...............................................................38
4 NX501E/NZ501E
English
Owner’s Manual
14. Bluetooth
TELEPHONE OPERATIONS ............................................................39
Select the BT Phone mode .................................................................................39
Bluetooth Telephone settings .............................................................................39
Register your cellular phone (Pairing) .................................................................40
Select the cellular phone ....................................................................................41
Obtaining the Phone Book data .........................................................................41
Telephone operations ..........................................................................................41
15. RADIO OPERATIONS ......................................................................................43
16. RDS OPERATIONS .........................................................................................44
17. DVB-T OPERATIONS ......................................................................................47
18. AUX 1 / AUX 2 OPERATIONS .........................................................................48
19. CAMERA OPERATIONS ..................................................................................48
20. REAR SOURCE OPERATIONS .......................................................................49
DVD Video in Rear ..............................................................................................49
AUX 1 in Rear ......................................................................................................50
AUX 2 in Rear ......................................................................................................50
iPod Video in Rear ..............................................................................................50
21. SETTING OPERATIONS ..................................................................................51
General Setup Menu ...........................................................................................51
Video Setup Menu ..............................................................................................51
Audio Setup Menu ..............................................................................................51
Navigation Setup Menu ......................................................................................52
Others Setup Menu .............................................................................................52
Set the Anti-Theft code .......................................................................................52
22. MONITOR OFF ................................................................................................53
23. TROUBLESHOOTING .....................................................................................54
GENERAL ............................................................................................................54
DVD PLAYER ......................................................................................................54
USB DEVICE .......................................................................................................55
Bluetooth ............................................................................................................55
TV/VTR (When connecting an optional TV tuner, etc.) ........................................56
24. ERROR DISPLAY .............................................................................................56
25. SPECIFICATIONS ............................................................................................57
INSTALLATION / WIRE CONNECTION GUIDE ....................................................59
5NX501E/NZ501E
English
English
Owner’s Manual
1. FEATURES
Double Din 6.2” Touch Panel Control
(NX501E)
Motorized 7” Touch Panel Control
(NZ501E)
DVD Video/CD-DA/MP3/WMA
Playback Capability
Built-In Bluetooth
®
OEM Steering Wheel Remote Ready
Compatible with iPod
®
/ iPhone
®
via
USB
Expanding Systems
NOTE:
The items listed outside the frames are the commercial products generally sold.
Expanding visual features
Rear Monitor
iPod
Rear Vision Camera
Expanding audio features
External Power
Amplifier
iPhone
USB
Memory
Bluetooth
Telephone
DVB-T Tuner (DTX501E)
Green
White
Red
Video In
Audio/L
Audio/R
Steering Wheel
Remote Control Terminal
Yellow
RearZone
Monitor
Yellow
Yellow
GPS
Antenna
External
Microphone
Connection
Radio Antenna
Gray
Black
Black
Black
Black
Video Out
4-Channel Amplifier
Subwoofer 1
Subwoofer 2
Line Out
Rear R
Line Out
Rear L
Line Out
Front R
Line Out
Front L
Purple
Gray
Black
White
Red
White
Red
White
Red
CAMERA
VISUAL IN
SWI
VIDEO OUT
DTV
2 ZONE OUT
Black
Red
White
Red
EX MIC
DVB-T Tuner (DTX501E)
iPod/iPhone
CCA-748 (sold separately)
Video Out
Rear Vision Camera
SUB WOOFER
AUX IN 2
Expanding DVB-T tuner features
6 NX501E/NZ501E
English
Owner’s Manual
2. PRECAUTIONS
• Foryoursafety,thedrivershouldnotwatchanyvideosourcesand/oroperatethecontrolswhiledriving.Please
note that watching and operating any video sources while driving are prohibited by law in some countries. Also,
while driving, keep the volume to a level at which external sounds can be heard.
• Whenusingthenavigationsystem,followtheprecautionslistedbelow.Afterreadingthismanual,besureto
keep it in a handy place (such as the glove box of your car).
• Thisnavigationsystemshouldnotbeusedtoreplaceyourownjudgment.Noitinerarysuggestedbythis
navigationsystemshouldeveroverrideanyhighwayregulations,yourownjudgment,oraknowledgeofsafe
driving practices. Do not follow the navigation system’s suggested itinerary if it would cause you to perform a
dangerous or illegal act, place you in a dangerous situation, or take you into an area you consider unsafe.
• Theadviceprovidedbythenavigationsystemistoberegardedasasuggestiononly.Theremaybetimeswhen
the navigation system displays the vehicle’s location incorrectly, fails to suggest the shortest route, or fails to
directyoutoyourdesireddestination.Insuchinstances,relyonyourowndrivingjudgment,takingintoaccount
the driving conditions at the time.
• Donotusethenavigationsystemtolocateemergencyservices.Thedatabasedoesnotcontainacomplete
listing of emergency services such as police stations, fire halls, hospitals and walk-in clinics. Please show
discretion and ask for directions in such instances.
• Asthedriver,youaloneareresponsibleforyourdrivingsafety.
• Inordertoavoidatrafcaccident,donotoperatethesystemwhiledriving.
• Inordertoavoidatrafcaccident,operatethesystemonlywhenthevehicleisstoppedatasafeplaceandthe
parking brake is on.
• Inordertoavoidatrafcaccidentortrafcoffense,rememberthatactualroadconditionsandtrafcregulations
take precedence over the information contained on the navigation system.
• Thesoftwaremaycontaininaccurateorincompleteinformationduetothepassageoftime,changing
circumstances, and the sources of information used. Please respect current traffic conditions and regulations at
all times while driving.
• Whereactualroadconditionsandhighwayregulationsdifferfromtheinformationcontainedonthenavigation
system, abide by the highway regulations.
• Keeptheamountoftimespentviewingthescreenwhiledrivingtoastrictminimum.
• Thenavigationsystemdoesnotprovide,norrepresentinanywayinformationon:trafcandhighway
regulations; technical aspects of the vehicle including weight, height, width, load and speed limits; road
conditions including grade, percentage of incline and surface conditions; obstacles such as the height and
widthofbridgesandtunnels;andothercurrentdrivingorroadconditions.Alwaysrelyonyourownjudgment
when driving a car, taking into account current driving conditions.
• Donotdisassembleormodifythisunit.Itmaycauseanaccident,re,orelectricshock.
• Donotusethisunitwhenatroubleexists,suchasnoscreencontentappearsornosoundisaudible.Itmay
cause an accident, fire, or electric shock. For that case, consult your authorized dealer or a nearest Clarion
service center.
• Incaseofaproblem,suchasanymaterialhasbeenenteredintheunit,theunitgetswet,orsmokeorstrange
smells come out of the unit, etc., stop using this unit immediately, and consult your authorized dealer or a
nearest Clarion service center.
Using it in that condition may cause an accident, fire, or electric shock.
• Useafusewiththesamespecicationonlywhenreplacingthefuse.
Using a fuse with a different specification may causes a fire.
• Fortheinstallationofthisunitorachangeintheinstallation,askyourauthorizeddealeroranearestClarion
service center for safety. Professional skills and experiences are required to do so.
WARNING
7NX501E/NZ501E
English
English
Owner’s Manual
1. When the inside of the car is very cold and the
player is used soon after switching on the heater,
moisture may form on the disc (DVD/CD) or the
optical parts of the player and proper playback may
not be possible. If moisture forms on the disc (DVD/
CD), wipe it off with a soft cloth. If moisture forms
on the optical parts of the player, do not use the
player for about one hour. The condensation will
disappear naturally allowing normal operation.
2. Driving on extremely bumpy roads which cause
severe vibration may cause the sound to skip.
3. This unit uses a precision mechanism. Even in the
event that trouble arises, never open the case,
disassemble the unit, or lubricate the rotating parts.
CAUTIONS:
This appliance contains a laser system and is
classified as a “CLASS 1 LASER PRODUCT”.
To use this model properly, read this owner's
Manual carefully and keep this manual for
your future reference. In case of any trouble
with this player, please contact your nearest
“AUTHORIZED service station”. To prevent
direct exposure to the laser beam, do not try to
open the enclosure.
S=1/1
NZ501E
NX501E
CNE-8121B-CL
1:1
机身大贴纸
技术说明:
1、大小65x75mm,红色外框线为刀模线。
2、材质,80g铜版纸,过哑胶。
3、内容印刷黑色:PANTONE Black C
4、要求内容印刷正确、清晰,贴纸表面干净、整洁,不得有脏污、斑点、折痕;
切边务必整齐,不得歪斜。
7- 81 21 -1 00 2- 00 -0 0
8 NX501E/NZ501E
English
Owner’s Manual
3. CAUTIONS ON HANDLING
Operation Panel
For a longer service life, be sure to read the following cautions.
• Theoperationpanelwilloperateproperlyina
temperature range of 0˚ to 60˚ C.
• Donotallowanyliquidsonthesetfromdrinks,
umbrellas etc. Doing so may damage the internal
circuitry.
• Donotdisassembleormodifythesetinanyway.
Doing so may result in damage.
• Subjectingtheoperationpaneltoshocksmayresult
in breakage, deformation or other damage.
• Donotletcigarettesburnthedisplay.
• Ifaproblemshouldoccur,havethesetinspectedat
your store of purchase.
• Donotinsertobjectsorpokeinthespacebetween
the operation panel and the main unit when the
panel is tilted.
• Theremotecontrolunitmaynotworkiftheremote
control sensor is exposed to direct sunlight.
• Inextremelycoldweather,thedisplaymovement
may slow down and the display may darken, but this
is not a malfunction. The display will work normally
when the e temperature increases.
• Smallblackandshinyspotsinsidetheliquidcrystal
panel are normal for LCD products.
USB Port
• TheUSBmemorystickmaystickoutwheninserted,
so it may cause danger during driving. In such
cases, you can use a commercial USB extension
cable, etc., but use it safely under your own
judgment.
• TheUSBmemorysticksmustberecognizedas
“USB mass storage class” to work properly. Some
models may not operate correctly.
When the memorized data is lost or damaged by any
chance, Clarion shall not be liable for any damage.
When using an USB memory stick, we recommend
that you backup your data stored on it before by
using a personal computer etc.
• DatalesmaybebrokenwhenusingUSBmemory
sticksinthefollowingsituation:
When disconnecting the USB memory stick or
turning the power off during writing or reading data.
When affected by static electricity or electric noise.
Connect/disconnect the USB memory stick when it
is not accessed.
• SomeUSBmemorystickscannotbeinsertedtothe
main unit because of their shape. In such cases, use
a commercial USB extension cable to connect them.
• Connectingwiththecomputerisnotcovered.
• Musicles(MP3,WMA,etc.)storedintheUSB
memory stick can be played back.
Cleaning
• Cleaningthecabinet
Use a soft, dry cloth and gently wipe off the dirt. For
tough dirt, apply some neutral detergent diluted in
water to a soft cloth, wipe off the dirt gently, then
wipe again with a dry cloth.
Do not use benzene, thinner, car cleaner, etc., as
these substances may damage the cabinet or cause
the paint to peel. Also, leaving rubber or plastic
products in contact with the cabinet for long periods
of time may cause stains.
• Cleaningtheliquidcrystalpanel
The liquid crystal panel tends to collect dust, so
wipe it off occasionally with a soft cloth. The surface
is easily scratched, so do not rub it with hard
objects.
9NX501E/NZ501E
English
English
Owner’s Manual
Handling
• Newdiscsmayhavesomeroughnessaroundthe
edges. If such discs are used, the player may not
work or the sound may skip. Use a ball-point pen or
the like to remove any roughness from the edge of
the disc.
Ball-point pen
Roughness
• Neversticklabelsonthesurfaceofthediscormark
the surface with a pencil or pen.
• Neverplayadiscwithanycellophanetapeorother
glue on it or with peeling off marks. If you try to play
such a disc, you may not be able to get it back out
of the DVD player or it may damage the DVD player.
• Donotusediscsthathavelargescratches,are
misshapen, cracked, etc. Use of such discs may
cause misoperation or damage.
• Toremoveadiscfromitsstoragecase,pressdown
on the center of the case and lift the disc out,
holding it carefully by the edges.
• Donotusecommerciallyavailablediscprotection
sheets or discs equipped with stabilizers, etc. These
may damage the disc or cause breakdown of the
internal mechanism.
Storage
• Donotexposediscstodirectsunlightoranyheat
source.
• Donotexposediscstoexcesshumidityordust.
• Donotexposediscstodirectheatfromheaters.
Cleaning
• Toremovengermarksanddust,useasoftcloth
and wipe in a straight line from the center of the disc
to the circumference.
• Donotuseanysolvents,suchascommercially
available cleaners, anti-static spray, or thinner to
clean discs.
• Afterusingspecialdisccleaner,letthediscdryoff
well before playing it.
On Discs
• Exerciseagoodprecautionwhenloadingadisc.The
operation panel will close automatically when leaving
it open for a while.
• Neverturnoffthepowerandremovetheunitfrom
the car with a disc loaded.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
Handling Discs
10 NX501E/NZ501E
English
Owner’s Manual
4. PANEL CONTROLS
NX501E Functions of Buttons
Note: Be sure to read this chapter while referring to front
diagram “PANEL CONTROLS”.
[PWR/VOL]
Knob
• Pressthiskeytopoweronthesysteminpoweroff
mode.
•Whenthepowerisalreadyon,itmovestothe
Navigation mode. If Navigation mode is displayed, it
moves to the Navigation menu.
• Keeppressingthiskeymorethan2secondtoturn
off the system when system is in power on mode.
• Rotatetheknobtoincreaseordecreasethevolume.
[NAVI/AV] Button
• Pressthisbuttontoenternavigationmode;press
again to return current source.
• Pressandholdthisbuttonfor3secondstodisplay
the brightness setting panel.
[ ]Eject
• Presstoejectdiscfromunit.
[MENU] Button
• Pressthisbuttontodisplaymainmenu,pressagain
to return current source.
• Pressandholdthisbuttonfor3secondstoturnoff
the monitor. Press any place of the screen to turn on
the monitor again.
[RESET] Button
• Pressthisbuttontohardwareresettheunit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[microSD]
• InsertamicroSDinthis.
Note: The microSD card is only for navigation. Please
don’t remove it, otherwise, the navigation function will
be disabled.
[AUX IN]
AUX 1 Connector.
[Microphone]
• InternalmicrophoneforuseduringBluetoothphone
calls.SensitivitycanbeadjustedfromtheSettings
menu.
[IR] SENSOR
• Receiverfortheremotecontrolunit(operating
range:30degreeinalldirections).
[ ]
[Microphone]
[MENU]
[NAVI/AV]
[PWR/VOL]
[RESET]
[microSD]
[AUX IN]
[IR]
11NX501E/NZ501E
English
English
Owner’s Manual
NZ501E Functions of Buttons
Note: Be sure to read this chapter while referring to front
diagram “PANEL CONTROLS”.
[MENU/PWR] button
• Pressthiskeytopoweronthesysteminpoweroff
mode.
• Keeppressingthiskeymorethan2secondtoturn
off the system when system is in power on mode.
• Pressthisbuttontodisplaymainmenu,pressagain
to return current source when system is in power on
mode.
[NAVI/AV] Button
• Pressthisbuttontoenternavigationmode;press
again to return current source.
• Pressandholdthisbuttonfor3secondstodisplay
the brightness setting panel.
•PressthiskeytochangedisplayofsubLCDwhen
panel is closed.
[ ]Eject
• Presstoejectdiscfromunit.
[Microphone]
• InternalmicrophoneforuseduringBluetoothphone
calls.SensitivitycanbeadjustedfromtheSettings
menu.
[RESET] Button
• Pressthisbuttontohardwareresettheunit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[microSD]
• InsertamicroSDinthis.
Note: The microSD card is only for navigation. Please
don’t remove it, otherwise, the navigation function will
be disabled.
[AUX IN]
AUX 1 Connector.
[OPEN]
[TA/SEND]
[
/ ]
[-]
[+]
[IR]
[
]
[
]
[
]
[BND/END PS]
[NAVI/AV]
[Microphone]
[RESET]
[AUX IN]
[MENU/PWR]
[microSD]
12 NX501E/NZ501E
English
Owner’s Manual
[ , ] Buttons
• Presstosearchpreviousornextstationorchannel
in Tuner modes.
• PressandholdtoentermanualseekstatusinTuner
mode, then press briefly to seek station by step.
• Presstosearchpreviousornexttrackorchapterin
CD, MP3/WMA, iPod and DVD video modes.
• Pressandholdtofastforwardorfastbackwardby
2x, 4x, 8x or 16x step in CD, MP3/WMA and DVD
video mode.
• Pressandholdtofastforwardorfastbackwardin
iPod music.
[
] Button
•Presstoplay,pauseaudioorvideo.
•Pressandholdtostopaudioorvideo.
•PressthiskeytomutewheninTunermode.
[+][-] Buttons
• PresstoIncreaseanddecreasevolume.
[OPEN] Button
•Usethisbuttontoopen/closeTFTpanel.
•PressandholdtoenterTFTpanelanglesetting
options.
[BND/END PS] Button
•presstochangebandsbetweenFM1,FM2,FM3,
AM bands.
•Pressandholdtostartpresetscan.Pressagainto
stop.
END Function:
Only be available when a call incoming or in telephone
talking.
•Presstorejectcallwhenacallincoming.
•Presstoendacallwhenintelephonetalking.
[TA/SEND] Button
•Pressthisbuttontoturnon/offtheTA(Trafc
Announcement) standby mode.
SENDFunction:
Only be available when there is a coming call.
•Presstoacceptthecomingcall.
•Presstoswitchtoprivatemodewhenintalking.
[IR] SENSOR
• Receiverfortheremotecontrolunit(operating
range:30degreeinalldirections).
13NX501E/NZ501E
English
English
Owner’s Manual
5. REMOTE CONTROL
Replacing the batteries
1. Press the retention tab and pull out the battery tray
and remove the old battery.
2. Insert the new CR2025 battery and slide the battery
tray back in the remote control the same direction
that you removed it.
Please ensure the tray is inserted in the correct
direction.
Note:
Using batteries improperly can cause them to explode.
Take note of the following points:
•Whenreplacingbatteries,replacebothbatterieswith
new ones.
•Donotshort-circuit,disassembleorheatbatteries.
•Donotdisposeofbatteriesintoreorames.
•Disposeofspentbatteriesproperly.
WARNING
Lithium (CR) battery contain
Perchlorate
Dispose of discharged batteries properly.
Signal transmitter
Operatingrange:30°inalldirections
[ / ]
[0-9]
[SRCH]
[BACK]
[ , , , ]
[TITLE]
[ ], [ ]
[ZOOM]
[MUTE]
[AUDIO]
[POWER / SRC]
[VOLUME]
[SET]
[PIC]
[TA]
[RPT]
[ ], [ ]
[SUB.T]
[OPEN]
[ANGLE]
[NAVI / AV]
[MENU]
[BAND]
[ROOT]
[ENT]
14 NX501E/NZ501E
English
Owner’s Manual
[ / ] Button
• Pressthisbuttontoplayorpausevideoandaudio
media.
• Pressthisbuttonmorethan1secondtostopvideo
and audio media.
[MUTE] Button
• MuteorUnmutethespeaker.
• Thesymbol on upper right area of the screen
indicates that speaker is muted.
[POWER/SRC] Button
• Pressthisbuttontomovethefocustonextavailable
source item on main menu.
• Pressthisbuttontopoweronwhentheunitis
power off.
• Pressthisbuttonmorethan1secondtopoweroff
when the unit is power on.
Note: While panel is closed position, you cannot select
any souce. (NZ501E Only)
[0 - 9] Buttons
• UseintheKeyPadscreentoselecttheradioor
DVB-T channels.
• Usetoselectthetrackinthetracklistscreen.
• PresstoenterDVDvideochapters/titlesintheKey
Pad screen.
[VOLUME] Buttons
• Increaseanddecreasevolume.
[NAVI/AV] Button
• Pressthisbuttontoswitchbetweencurrentsource
and current position on navigation map.
[SRCH] Button
• Pressthisbuttontoopenchapterortitlesearch
window while playing DVD.
[BAND] Button
• Switchtonextbandalternately.
[SET] Button
• PressthisbuttontoopentheAudiosettingmenuin
any mode.
[BACK] Button
• Pressthisbuttontoquitmainmenuifcurrentscreen
is main menu.
[
], [ ], [ ], [ ] Buttons
• Pressthisbuttonforcursormovementinmainmenu
or Setting mode.
• Fromthemainmenu,youcanselectyourdesired
source or change your settings.
[MENU] Button
• PressthisbuttontoentertheMAINMENUorreturn
current resource.
[PIC] Button
•Pressandholdthisbuttontochangeyourmonitor
brightness.
[ENT] Button
• PresstoxtheentereddataintheKeyPadscreen
or enter the item the cursor is on.
[TA] Button
• PresstoTAOn/Off.
[TITLE] Button
• PresstogotothetitlemenuontheDVD.
[ROOT] Button
• PresstogototherootmenuontheDVD.
[RPT] Button
• Presstoperformchapterrepeat/titlerepeat/
repeat off while playing DVD mode.
• Presstoperformtrackrepeat/repeatoffwhile
playing CD.
• Presstoperformrepeattrack/repeatfolder/repeat
off while playing MP3/WMA, or video files on disc.
• Presstoperformrepeattrack/repeatfolder/repeat
off while playing MP3/WMA, or video files in USB
memory.
• PressforAFOn/Off.
[ ], [ ] Buttons
• Presstoseekthenextavailablehigherorlower
station in Tuner mode.
• Presstoselectthenexthigherorlowerchapter
number in DVD video mode.
• PresstoselectthenexthigherorlowertrackinDVD
Audio, USB Video, USB Audio mode.
• Pressformovementofbackgroundsourcein
Navigation mode.
Functions of Remote Control Buttons
You can use the remote control unit to control the NX501E and NZ501E.
Note:
• Thewirelessremotecontroloperationmaynotbeoptimalindirectsunlight.
15NX501E/NZ501E
English
English
Owner’s Manual
Functions of Remote Control Buttons
[ ], [ ] Buttons
• Presstomanuallyselectthenexthigherorlower
station in Tuner modes.
• Presstoperformfast-forwardorfast-backward
searching. Press again to change the speed to 2x,
4x, 8x or 16x.
• Pressformovementofbackgroundsourcein
Navigation mode.
[ZOOM] Button
• PresstoturnonandzoominwhileplayingDVD.You
can zoom in up to 3x. (No all DVD disc supports this
function).
[AUDIO] Button
• PresstoswitchtheAUDIOchannelofthediscwhile
playing DVD.
[SUB-T] Button
• Presstoswitchnextavailablesubtitlewhileplaying
DVD.
• PresstodisplayVideomenuiniPodmode.
[ANGLE] Button
• PresstoswitchthedifferentANGLEwhileplaying
DVD. (No all DVD disc supports this function)
• PresstodisplayAudiomenuiniPodmode.
[OPEN] Button
• PressthisbuttontoOPENorCLOSEthemotorized
screen. Please ensure there are no obstructions
before starting the operation. (NZ501E only)
16 NX501E/NZ501E
English
Owner’s Manual
Front Zone Source
[Tuner]-Press the button to display the Tuner mode.
[Disc Audio]-Press the button to display the Disc
Audio mode.
[Bluetooth Audio]-Press the button to display the
Bluetooth Audio mode.
[USB Audio]-Press the button to display the USB
Audio mode.
[AUX 1]- Press the button to display the AUX 1 mode.
[iPod Audio]-Press the button to display the iPod
Audio mode.
[DVB-T]-Press the button to display the DVB-T mode.
[Disc Video]-Press the button to display the Disc
Video mode.
[Camera]-Press the button to display the Camera
mode.
[USB Video]-Press the button to display the USB
Video mode.
[AUX 2]-Press the button to display the AUX 2 mode.
[iPod Video]-Press the button to display the iPod
Video mode.
[Navigation]-Press the button to display the
Navigation mode.
[Telephone]-Press the button to display the Telephone
mode.
[Rear Button]-Press the button to display the rear
menu.
[Setting Button]-Press the button to display the
setting menu.
Rear Zone Source
[Rear Disc Video]-Press the button to display the
Rear Disc Video mode.
[Rear AUX 1]-Press the button to display the Rear
AUX 1 mode
[Rear iPod Video]-Press the button to display the
Rear iPod Video mode.
[Rear AUX 2]-Press the button to display the rear AUX
2 mode.
[2-Zone Off]-Press the button to closed the rear
activity.
[Front Button]-Press the button to display the front
main menu.
[Setting Button]-Press the button to display the
setting menu.
6. MAIN MENU OPERATIONS
Scrolling the menu
Press screen and scrolling to right or left it will
switch to next or previous page of mainmenu.
Moving the menu position
1. Press any quadrate icon on mainmenu more than
2seconds,theiconwilloatonmainmenu.
2.Scrollingtheoatingicontoanypositionyouwant.
17NX501E/NZ501E
English
English
Owner’s Manual
DVD Video Features
This unit provides the following functions in addition to
the high image quality and sound quality of DVD video.
Note:
•Thefunctionsdescribedinthissection,forexample,
the recorded language,subtitles, angles, etc. differ
depending on the DVD video disc.
Refer to the instructions provided with the DVD video.
•Somediscfunctionsmayoperatedifferentlyfrom
described in this manual.
Multi-sound function
DVD video can store up to 8 languages for one film;
select the language of your preference.
• Thelanguagesstoredonthediscareindicatedby
the icon shown below.
Multi-angle function
A DVD video that is filmed from multiple angles allows
you to select the angle of choice.
• Thenumberofrecordedanglesareindicatedbythe
icon shown below.
Subpicture (subtitles) function
A DVD video can record subtitles for up to 32
languages and you can select the language of the
subtitles you wish to see.
• Thenumberofrecordedsubtitlelanguagesare
indicated by the icon shown below.
Multi-story function
When a DVD video contains more than one story for
alm,youcanselectthestoryyouwishtoenjoy.
The operation procedures vary with the disc; observe
the instructions for selecting a story provided during
playback.
Menu screens
Menu can be called up during DVD video playback to
perform menu setting.
• Exampleshowingmenudisplay
Discs
Playable discs
This DVD video player can play the following discs.
Playable discs
CD TEXTDVD video discs Audio CDs
Playable media files
MP3/WMA
About CD Extra discs
A CD Extra disc is a disc in which a total of two
sessions have been recorded. The first session is
Audio session and the second session is Data session.
Your personally-created CDs with more than second
data sessions recorded cannot be played on this DVD
video player.
Note:
•WhenyouplayaCDExtradisc,onlytherstsession
will be recognized.
About playing a CD-R/CD-RW disc (MP3, WMA)
This player can play CD-R/CD-RW discs previously
recorded in music CD format (MP3, WMA).
7. DVD SYSTEM
DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains
either one film or four hours of music.
18 NX501E/NZ501E
English
Owner’s Manual
About playing a DVD-R/RW or DVD+R/RW disc
This player cannot play DVD-R/RW and DVD+R/ RW
discs previously recorded in video CD format.
However, MP3/WMA files recorded on DVD-R/ RW and
DVD+R/RW discs can be played.
Discs that cannot be played back
This DVD video player cannot play back DVD-Audio,
DVD-RAM, Photo CDs, etc.
Note:
•ItmayalsonotbepossibletoplaybackCDsrecorded
onaCD-RunitandCD-RWunit.(Cause:disc
characteristics, cracks, dust/dirt, dust/dirt on player’s
lens, etc.)
•IfaCD-RorCD-RWdiscthathasnotbeennalizedis
played, it will take a long time to start playing. Also, it
may not be possible to play depending on its recording
conditions.
•YoucannotplaySuperAudioCDsPlaybackoftheCD
player is not supported even if it is a hybrid disc.
About MP3/WMA playback
This unit can play back CD-R/CD-RW, DVD-R/ RW
and DVD+R/RW discs on which MP3/WMA music data
have been recorded.
For a detailed information, see the section entitled
“Listening to MP3/WMA”.
Note on region numbers
The DVD video system assigns a region number to
DVD video players and DVD discs by sales area.
DVD video players sold in the Europe can play back
DVD discs with the region number “ALL”, “2” or any
combination of numbers that also incorporate a “2”.
The DVD video region number is marked on the disc
jacketasshownbelow.
ALL
4
6
2
2
• Thisproductincorporatescopyrightprotection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
• ManufacturedunderlicensefromDolby
Laboratories.“Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby Laboratories.
• “MadeforiPod,”and“MadeforiPhone”mean
that an electronic accessory has been designed to
connect specifically to iPod, or iPhone, respectively,
and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod or iPhone may affect wireless
performance. iPhone and iPod are trademarks
of Apple Inc., registered in the U.S. and other
countries.
• TheBluetooth
®
word mark and logos are owned
by the Bluetooth
®
SIG, Inc. and any use of such
marks by Clarion Co., Ltd. is under license. Other
trademarks and trade names are those of their
respective owners.
About the registered marks, etc.
19NX501E/NZ501E
English
English
Owner’s Manual
Change DVD System Settings
Note:Ifthesetupoperationisperformedinthe
middle of DVD video play, the disc will restart from the
beginning.
Selecting DVD Set Up Menu
1. Press the [Setting] button on the Main Menu to
access the Video set up menu.
2. Press [Video] button. The video menu is displayed.
Setting up the Screen Size
Press the [DVD Wide Screen Mode] button to turn on
or turn off the DVD wide screen mode.
The factory default setting is “On”.
Note: Not all DVD disc supports this function.
DVDWideScreenModeOn
DVDWideScreenModeOff
Setting up the password for parental level
control
The factory default pass code is “0000”.
1. In Main Menu press [Setting] button. Press
[Others] button on the display. Touch the [Set
Password] ---- and a numerical key pad will appear.
Input the old password,and touch the [OK] key,or
input “4356” to reset password.
Input a new password,and touch the [OK] key.
Input the same new password again, and touch the
[OK] key.
Note: When a disc with view restrictions is inserted, you
will be prompted to input this password. The disc will not
be viewable until the correct password is entered.
Set rating for parental level control
1. Select Others screen while in Setting mode. Press
[Parental Control] button. Press the desired rating
for level control. Use this table to set the parental
level.
KidSafe KidSafe
G General Audiences
PG Parental Guidance Suggested
PG-13 Parents Strongly Cautioned
PG-R Parental Guidance Restricted
R Restricted
NC-17 No One 17 And Under Admitted
Adult Only Adult
• Thecontentsthattheparentallevelrestrictsvary
with the country code.
Note: The rating can be selected only under the
password unlocked status, and the limits can be set only
under the password locked status.
8. DVD VIDEO PLAYER OPERATIONS
20 NX501E/NZ501E
English
Owner’s Manual
Watching to a disc
1.Toloadadisc:
Insert the disc into the center of the insertion slot the
label side facing up.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
Note:
•Neverinsertforeignobjectsintothediscinsertionslot.
•Ifthediscisnotinsertedeasily,theremaybeanother
disc in the mechanism or the unit may require service.
•8cm(singleplay)discscannotbeused.
2. Disc starts playing automatically.
WARNING
Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal setting
after the video has started.
Ejecting a disc
1.Toejectadiscpresseject[ ] button. The play
mode then switches to the Tuner mode.
Ifthediscisleftintheejectedpositionfor15
seconds, the disc is automatically reloaded. In this
case, the play mode will remain in the Tuner mode.
Note:
Ifyouforceadiscintobeforeautoreloading,it
may damage a disc.
Showing DVD Player mode screen
After disc is loaded, the play mode is automatically
engaged.
Touch any place of the screen to display DVD Video
menu touch the screen again to return the playback
screen. The display will return to the playback screen,
if you do not touch the screen for 10 seconds.
1 2 3 4 5 6 7 8
9
1011
12 13 14 15 16 17
1 - Next page Buttons
2 - Previous Track /Fast Backward Button
3 - Play/Pause Button
4 - Next Track/Fast Forward Button
5 - Elapsed playing time
6 - Seek bar
7 - Total time
8 - Top Menu Button
9 - System time
10 - Bluetooth status
11 - DVD playback info
12 - Previous page Button
13 - Repeat switching Button
14 - Audio Channel switching Button
15 - Subtitle switching Button
16 - INFO Button
17 - Direct chapter or title searching Button
Operate the DVD Player menu
You can select the button items displayed in the DVD
menu by directly touching it.
Play/Pause Playback
1. Touch [ ] button to pause during playback.
2. Touch [ ] button again to resume playback.
Skip (Search) a Chapter
1. Press [ ] or [ ] button during playback.
Chapters are skipped down or up from current
locations, as many times as the button is pressed, and
playback starts.
Skip use seek bar
Press the triangle [ ] on seek bar and drag it to any
position where you want to start playback.
21NX501E/NZ501E
English
English
Owner’s Manual
Fast Forward/Fast Backward
1. Press [ ] or [ ] button and hold 2 seconds to
start fast backward or fast forward during playback.
The playback speed starts at 2x, then will increase
to 4x, 8x, and 16x. Release the button will continue
playing with normal speed.
2. [ ] or [ ] button on remote control can also be
used to start fast backward or fast forward during
playback.
Note:
•Noaudioisreproducedduringfastforwardandfast
backward operation.
•Thefastforwardandfastbackwardspeedmaydiffer
depending on the disc.
Stop Playback
1. Press the [ ] button on remote control more than
1 second. Playback is stopped.
2. To resume playback, press the [ ] button.
Playback resumes from start of the disc.
Search with a Chapter/Title Number
You can locate the beginning of a scene using the
chapter numbers or title numbers recorded on the
DVD Video disc.
1. Showing the DVD Video menu, touch [ ] button.
TheKeyPadscreenappearswiththechapter/Title
number input mode.
Touching [
]buttonturnstheKeyPadtothe
chapter number input mode.
Touching [
]buttonturnstheKeyPadtothetitle
number input mode.
•Title
A large segment to divide the data area of the disc.
•Chapter
A small segment to divide the data area of the disc.
2. Input the number of the title/chapter that you want
to play with the [0] to [9] key.
3. Touch the [ ] button.
Playback starts from the scene of the input title
number or chapter number.
Note:
Iftheinputtitle/chapternumberdoesnotexistor
searching with a title/chapter number is not allowed, the
screen image will not change.
4. Touch [ ] button to close the key pad.
Repeat Playback
This operation plays back chapters recorded on the
DVD-Video repeatedly.
1. Showing the DVD Video menu, touch [ ] button.
2. Touch [ ] button once for Chapter Repeat, again
for Title Repeat.
3. Press [ ] button again to turn off the repeat
playback.
Using the Title Menu
On DVD discs containing two or more titles, you can
select from the title menu for playback.
1. Showing the DVD Video menu, touch [ ]
button during playback.
The title menu screen appears.
* Depending on the disc, the title menu may not be
called.
2. Touch the title menu screen.
3. Select the items in the title menu screen by
directional buttons.
* Depending on the disc, items may not be selected
with the directional buttons.
4. Touch [ ] button to fix on the selected item.
5. Touch [
] button.
22 NX501E/NZ501E
English
Owner’s Manual
Switching Audio
On discs in which two or more audios or audio
languages have been recorded, you can switch among
the audio languages during playback.
1. Showing the DVD Video menu, touch [
] button
during playback.
• Eachtimeyoutouchthebutton,youcanswitch
among audio languages.
• Itmaytaketimetoswitchamongaudios.
Depending on the disc, up to 8 kinds of audios may
berecorded.Fordetails,seethemarkofthedisc:
(
Indicates that 8 audios have been recorded).
When the power is turned on and when the disc
is changed to a new one, the language set as the
factory default is selected. If that language has not
been recorded on disc the language is specified on
the disc.
Depending on the disc, switching may be
completely impossible or impossible on some
scenes.
Switching Subtitles
On DVD discs in with two or more subtitle languages
have been recorded, you can switch among the
subtitle languages during playback.
1. Showing the DVD Video menu, touch [ ] button
to select a subtitle during playback. Each time you
touch the key, you can switch among subtitles.
• Itmaytaketimetoswitchamongsubtitles.
Depending on the disc, up to 32 kinds of subtitles
may be recorded. For details, see the mark of the
disc:( Indicates that 8 kinds of subtitles have
been recorded).
Depending on the disc, switching may be
completely impossible or impossible on some
scenes.
2. To turn off subtitles, repeat touching [ ] button
until subtitles are turned off.
Switching angles
On DVD discs in with video images have been
recorded in two or more angles, you can switch
among the angles during playback.
1. Touch [Angle] key on the remote control during
playback. Each time you touch the key, you can
switch among angles.
• Itmaytaketimetoswitchamongangles.
• Dependingonthedisc,upto9anglesmaybe
recorded.Fordetails,seethemarkofthedisc:(
Indicates multi-angle).
• Dependingonthedisc,anglesmayswitchsmoothly
or switch with a momentary still image.
• Dependingonthedisc,switchingmaybe
completely impossible or impossible on some
scenes.
• Dependingonthedisc,scenesrecordedintwoor
more angles may be played back.
Displaying the playback status
Touch [ ] button on DVD Player mode screen,
Playback status is displayed on screen.
Play disc video files
This system can play video files (MP4, etc) stored on
disc.
Showing video files Player mode screen
1. After disc with video files is loaded, touch [DVD
Video] button on MAIN MENU to show video files
player mode screen.
2. Touch the screen of the playing video file to display
Video files player menu touch the screen again to
return the playback screen. The display will return to
the playback screen, if you do not touch the screen
for 10 seconds.
1 2 3 4 5 6
7
89
10 11 12 13
1 - Next page Button
2 - Previous Track /Fast Backward Button
3 - Play/Pause Button
4 - Next Track/Fast Forward Button
5 - Elapsed playing time /Seek bar
6 - List Mode Button
7 - System time
8 - Bluetooth status
9 - Playback info
10 - Previous Row Buttons
11 - Repeat Button
12 - Audio Button
13 - Subtitle Button
23NX501E/NZ501E
English
English
Owner’s Manual
Operate the Video files Player menu
You can select the button items displayed in the Video
files player menu by directly touching it.
Play/Pause Playback
1. Touch [ ] button to pause during playback.
2. Touch [ ] button again to resume playback.
Switch to Previous/next file
1. Press [ ] or [ ] button during playback to play
previous /next file
Skip using seek bar
Press the triangle on seek bar and drag it to any
position where you want to start playback.
Fast Forward /Fast Backward
1. Press [ ] or [ ] button and hold 2 seconds to start
fast backward or fast forward during playback. The
playback speed starts at 2x, then will increase to
4x, 8x, and 16x. Release the button will continue
playback with normal speed.
2. [ ] or [ ] button on remote control can also be
used to start fast backward or fast forward during
playback.
Note:
No audio is reproduced during fast forward and fast
backward operation.
The fast forward and fast backward speed may differ
depending on the disc.
Stop Playback
1. Press the [ ] button on remote control more than
1 second. Playback is stopped.
2. To resume playback, press the [ ] button.
Playback resumes from start of the folder which
playing track is in.
Repeat Playback
This operation plays back video files recorded on the
disc repeatedly.
The repeat set as the factory default is Repeat Folder.
1. Showing the video files player menu, touch [ ]
button.
2. Touch [ ] button once for Repeat off, again for
Repeat Track.
3. Press [ ] button again for Repeat Folder.
Switching Audio
Some video files will have two or more audio channels;
you can switch among the audio channels during
playback.
1. Touch [ ] button during playback.
• Eachtimeyoutouchthebutton,youcanswitch
among audio languages.
• Itmaytaketimetoswitchamongaudios.
Depending on the disc, switching may be impossible.
Switching Subtitles
Some video files will have two or more subtitles have
been recorded; you can switch among these subtitles
during playback.
1. Touch the [ ] button to select a subtitle during
playback.
• Eachtimeyoutouchthekey,youcanswitchamong
subtitles.
• Itmaytaketimetoswitchamongsubtitles.
Depending on the disc, switching may be impossible.
Video files list
Showing the Video files player menu; touch the
[
] button to display video files list screen.
Video files list operations is almost same as Disc
Audio player mode. Please refer to DVD Audio Player
Operations.
24 NX501E/NZ501E
English
Owner’s Manual
Listening to a disc/Ejecting a disc
Please refer to Disc Video Player Operations -watching
toadiscandEjectingadisc.
Showing CD Player mode screen
1. After disc is loaded, the play mode is automatically
engaged.
2. If disc have been loaded you can touch [Disc Audio]
button on main menu to display CD player mode
screen.
1
2
3
5
67
8
4
9
10
11
12
13
14
15
19
16
17
18
1 - Open option menu Button
2 - Elapsed playing time indicator
3 - Rotation effect
4 - Audio files or CD tracks.
5 - System time
6 - Bluetooth status
7 - Play back status
8 - Previous Track /Fast Backward Button
9 - Repeat Button
10 - Play/Pause Button
11 - Shuffle Button
12 - Next Track/Fast Forward Button
13 - Direct Searching Button
14 - Scan Start/Stop Button
15 - Rotation Effect On/Off Button
16 - Song Title
17 - Artist Information
18 - Album Information
19 - Close option menu Button
Operate the CD Player menu
You can select the button items displayed in the CD
player menu by directly touching it in list.
Play/Pause Playback
1. Touch [ ] button to pause during playback.
2. Touch [ ] button again to resume playback.
Switch to Previous/next file or track
Press [ ] or [ ] button during playback to play
previous /next file.
• Pressing[ ] button starts playback from the
beginning of the next track.
• Pressing[ ] button starts playback from the
beginning of the current track. When this button is
pressed again within 5 seconds, playback starts
from the beginning of previous track.
Fast Forward /Fast Backward
1. Press [ ] or [ ] button and hold more than
2 seconds to start fast backward or fast forward
during playback. The playback speed starts at 2x,
then will increase to 4x, 8x, and 16x. Release the
button will continue playback with normal speed.
2. [ ] or [ ] button on remote control can also be
used to start fast backward or fast forward during
playback.
Note:
•Noaudioisreproducedduringfastforwardandfast
backward operation.
•Thefastforwardandfastbackwardspeedmaydiffer
depending on the disc.
Stop Playback
1. Press the [ ] button on remote control more than
1 second. Playback is stopped.
2. To resume playback, press the [
] button.
Playback resumes from start of disc.
9. DVD AUDIO PLAYER OPERATIONS
25NX501E/NZ501E
English
English
Owner’s Manual
Repeat Playback
The repeat set as the factory default is Repeat Track.
Touch the [
] button once for Repeat off, again for
Repeat Track.
Shuffle Playback
1. Touch [ ] button to shuffle the tracks during
playback.
2. Touch this button again to turn off the feature.
Selecting a track on the Track List Screen
This function allows you to select tracks from a
displayed list.
1. Touch the track title on the display list. The selected
track will start playing.
2. When the desired track is not displayed, press and
flick the track list up or down.
3. Touch the desired track title key. The corresponding
track is started playback.
Scanning the Tracks
1. Touch [ ] button to show [Scan ] button.
2. Touch [Scan ] button during playback.
• Itwillplayfromnexttrack,andeachtrackwill
display for 10 seconds.
• The[Scan ] button will switch to [Scan ]
button.
3. Touch [Scan ] button.
• Itwillcontinueplaybackfromcurrenttrack.
• [Scan ] button will switch to [Scan ]
button.
* The function will scan all tracks orderly in current
folder once. After Scan stopped playback will
continue.
Searching with the Track Number
This operation allows searching using the track
numbers recorded on the CDs.
1. Touch [
] Button to show [ ] button.
2. Touch [
] button .The numerical keypad will
appear on the screen.
3. Input the track number that you want to play back
with [0] to [9] key.
Playback starts from the track of the input track
number.
• Iftheinputtracknumberdoesnotexistorsearching
with track number is not allowed, the screen image
will not change.
• Touchthe[ ] button will close the numerical
keypad.
• Touch[ ] Button will close the option window and
display playback screen.
Rotation Effect On/Off
This operation allows turn on/turn off rotation effect.
The factory default is On.
1. Touch [ ] Button to show [Rotation effect] button
2. Press button [ ] will turn on the Rotation effect.
3. Press button [ ] will turn off the Rotation effect.
Listening To MP3/WMA
This unit is an ID3 Tag compatible model.
This unit supports the ID3 TAGs of the Version 2.4, 2.3,
1.1 and 1.0.
In displaying, this unit gives priority to the Version 2.3
and 2.4 TAGs.
What is MP3/WMA?
MP3 is an audio compression method and classified
into audio layer 3 of MPEG standards.
WMA is an audio compression method developed by
Microsoft Corporation.
These audio compression methods have penetrated
into PC users and become a standard format.
These features compress the original audio data to
about 10 percent of its initial size with a high sound
quality. This means that about 10 music CDs can be
recorded on a CD-R disc or CD-RW disc to allow a
long listening time without having to change CDs.
Note:
SomeCDsrecordedonCD-R/RWmodemaynot
be usable.
Displaying MP3/WMA TAG titles
Tag information such as title, artist and album title
can be displayed for MP3/WMA file containing Tag
information.
Precautions when creating MP3 disc
• Fileextensions
1. Always add a file extension “.MP3” or “.mp3” to an
MP3 file, and “.WMA” or “.wma” to a WMA file by
using single byte letters. If you add a file extension
other than specified or forget to add these file
extension, the file cannot be played. In addition, if
you use upper case and lower case letters (capital
and small letters) mixed for file extensions, normal
play may not be possible.
26 NX501E/NZ501E
English
Owner’s Manual
2. Files other than MP3/WMA data cannot be played.
Playing files with a format not supported will be
skipped, and the scan, random and repeat playback
mode may be canceled.
• FileandDiscNotSupported
Files and discs with following extensions are not
supported:*.AAC,*.DLF,*.M3U,*.PLS,*.MP3PRO
files, files with DRM, open session discs.
• Logicalformat(Filesystem)
1. When writing an MP3/WMA file on a disc, please
select “ISO9660 level 1 or level 2 (without including
expansion format)” as the writing software format.
Normal playback may not be possible if the disc is
recorded on another format.
2. The folder name and file name can be displayed
as the title during MP3/WMA play but the title
must be within 31 single byte alphabetical letters
and numerals for the folder name and file name
(including an extension). Entering more letters or
numerals than specified may cause an incorrect
display.
• EnteringFileandFolderNames
Names using the code list characters are the only
file names and folder names that can be entered and
displayed. Using any other character will cause the file
and folder names to be displayed incorrectly.
• ElectronicShockProtection
10 seconds for CD-DA (CDA)
45 seconds for MP3 recorded at 44.1 kHz, 128 kbps
90 seconds for WMA recorded at 44.1 kHz, 128 kbps
• Folderstructure
1. A disc with a folder having more than 8 hierarchical
levels will conflict with the ISO9660 and playback
will be impossible.
• Numberoflesorfolders
1. The maximum allowable number of folders is 255
(including root directory); the maximum allowable
number of files is 1500 (max. 255 per folder). This
represents the maximum number of tracks that can
be played back.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always be
played in the order displayed on the PC).
• Somenoisemayoccurdependingonthetypeof
encoder software used while recording.
• IncaseofatrackrecordedatVBR(variablebitrate),
the display for the play time of the track may be
slightly different from the actual play time. Also, the
recommended value of VBR ranges from 32 kbps to
320 kbps.
• Afterdiscselection,theplaymodeisautomatically
engaged.
Playing MP3 folders
When selected for play, files and folders (Folder
Search, File Search or Folder Select) are accessed
in the order in which they were written to the media.
As a result, the order in which they are expected to
be played may not match the order in which they are
actually played.
You may be able to set the order in which MP3/
WMA files are to be played by assigning file names
beginning with play sequence numbers such as “01”
to “99”.
For example, a medium with the following folder/ file
hierarchyissubjecttoFolderSearch,FileSearchor
Folder Select.
See the diagram below.
The player will only recognize three folder levels and
does not display folders containing other folders. In
the example above, the unit will display folders 2,3, 5
and 7, but 1 and 6 since they do not contain others.
27NX501E/NZ501E
English
English
Owner’s Manual
Playback MP3/WMA menu
1
2
3
1. Repeat Playback
While playing MP3/WMA touch button can switch
between Repeat Track Repeat Folder and Repeat Off.
2. Folder
Touch the folder title on the display list, the file list will
display files and folders in selected folder.
3. Current Folder
• Showingtitleofcurrentfolder.
• Thenumberonthefoldersymbolisthenumberof
files and folders number in current folder.
• Touchthetitleofcurrentfolder,playlistwillshow
files and folders in upper folder.
Stop Playback
1. Press the [ ] button on remote control more than
1 second. Playback is stopped.
2. To resume playback, press the [ ] button.
Playback resumes from start of the folder which
playing track is in.
Other operations about playing MP3/WMA are almost
same as CD Player mode.
28 NX501E/NZ501E
English
Owner’s Manual
10. USB AUDIO OPERATIONS
This system can play audio files (MP3/WMA) stored in
an USB memory which is recognized as “USB Mass
Storage Class device”. You can use your USB memory
as an audio device by simply copying desired audio
files into it.
Note:
•Thissystemwillnotoperateormayoperateimproperly
with some USB memory.
•FilesprotectedwithanyDRMcannotbeplayed.
Notes on using USB memories
Generalnotes
• Whennosupportles,thelelistdisplaynothing.
NotesontheMP3/WMAles
•ThissystemcanplaytheMP3/WMAlesstoredin
the USB memory.
• SettheSamplingFrequencyto:
ForMP3les:
• MPEG1Layer3:32,44.1,or48kHz
• MPEG2Layer3:32,44.1,or48kHz
ForWMAles:32,44.1,or48kHz
• SettheBitRateto:
ForMP3les:
• MPEG1Layer3:32to320kbps(VBR)
• MPEG2Layer3:32to320kbps(VBR)
ForWMAles:64or192kbps
• Addthefollowingleextensionusingsinglebyte
characters:
• ForMP3les:“.MP3”or“.mp3”
• ForWMAles:“.WMA”or“.Wma”
Notesonthefolderstructure
• Thefolderhierarchymustbewithin8hierarchical
levels. Otherwise, playback may be impossible.
• Themaximumallowablenumberoffoldersis65535
(including root directory and folders with no MP3/
WMA file).
• Themaximumallowablenumberoflesinafolder
is 65535.
• YoucanstoretheMP3les,WMAlestogetherin
a folder.
• Thesystemmaybecomeslowifthelesorfolders
exceed the limitation above.
NotesontheTagtitles
The limitations on the Tag titles are same as those in
DVD Audio Player mode.
Select USB Audio mode
Connect your USB memory with MP3/WMA files to the
USB connector. The system will automatically detect
the connected device, and the [USB Audio] button on
main menu will be enabled.
• WhenanUSBmemoryisalreadyconnected
Touch [USB Audio] button to select the USB Audio
mode.
The system changes to the USB Audio mode and
starts playback from the previous position or from the
beginning.
Note:
Ifyoureconnectthesamedevicethatyoudisconnected
last, the system will play back where it left off.
1 3 4 5
2
6
7
89
10
11
13
12
14
16
15
1 - Open option menu Button
2 - Play/Pause Button
3 - Repeat Button
4 - Shuffle Button
5 - Next Track/Fast Forward Button
6 - MP3/WMA files in list
7 - Folders in list
8 - Folders browse control
9 - Playback status info
10 - Album Art
29NX501E/NZ501E
English
English
Owner’s Manual
11 - Current ID3 info area
12 - Elapsed playing time indicator/Seek bar
13 - Previous Track /Fast Backward Button
14 - Direct Button
15 - Scan Button
16 - Close option menu Button
Playing MP3/WMA files in USB memory
Play/Pause Playback
1. Touch [ ] button to pause during playback.
2. Touch [ ] button again to resume playback.
Switch to Previous/next file
Press [ ] or [ ] button during playback to play
previous /next file.
• Pressing[ ] button starts playback from the
beginning of the next track.
• Pressing[ ] button starts playback from the
beginning of the current track; when this button is
pressed again within about 5 seconds, playback
starts from the beginning of previous track.
Fast Forward /Fast Backward
1. Press [ ] or [ ] button and hold more than
2 seconds to start fast backward or fast forward
during playback. The playback speed starts at 2x,
then will increase to 4x, 8x, and 16x .Release the
button will continue playback with normal speed.
2. [ ] or [ ] button on remote control can also be
used to start fast backward or fast forward during
playback.
Note:
•No audio is reproduced during fast forward and fast
backward operation.
•Thefastforwardandfastbackwardspeedmaydiffer
dependingontheaudioles.
Stop Playback
1. Press the [ ] button on remote control more than
1 second. Playback is stopped.
2. To resume playback, press the [ ] button.
Playback resumes from start of the folder which
playing track is in.
Repeat Playback
The repeat set as the factory default is Repeat Folder.
Touch the [
] button once for Repeat Track, again for
Repeat Folder.
Note:
TherepeatinallUSBlesfunctionisnotavailable.
Shuffle Playback
1. Touch [ ] button to shuffle the tracks in playing
folder during playback.
2. Touch this button again to turn off the feature.
Album Art work
If current audio file contains album art image in ID3,
the picture will be displayed in this area.
ID3 info area
ThisareadisplayID3infoofplayingle:songtitle,
artist information, album information, number of
current file/total number in current folder, elapsed
playing time/total time of current file.
Skip use seek bar
Press on seek bar and drag it to any position where
you want to start playback.
Select a folder on display list
Touch the folder title on the display list, the display list
will display files and folders in selected folder.
Selecting a track on the display List
This function allows you to select tracks from a
displayed list.
1. Touch the track title on the display list. The selected
track will start playing.
2. When the desired track is not displayed, press and
flick the track list up or down.
3. Touch the desired track title key. The corresponding
track is started playback.
Folders browse control
Show the title of previous folder.
Show the title of current folder.
Show the title of next folder.
This area is same as the mouse touch panel of
notebook computer. Flick up and down in this area will
browse previous or next folder in current folder. Flick
left or right will enter this folder or back to the father
folder.
30 NX501E/NZ501E
English
Owner’s Manual
Scanning the Tracks
1. Touch [ ] Button to show [Scan ] button.
2. Touch [Scan ] button during playback.
• Itwillplayfromnexttrack,andeachtrackwill
display for 10s.
• The[Scan ] button will switch to [Scan ]
button.
3. Touch [Scan ] button.
• Itwillcontinueplaybackfromcurrenttrack.
• [Scan ] button will switch to [Scan ]
button.
* The function will scan all tracks orderly in current
folder once .After Scan stopped playback will
continue.
Searching with the Track Number
This operation allows searching using the track
numbers in playing folder.
1. Touch [ ] Button to show [ ] button.
2. Touch [ ] button .The numerical keypad will
appear on the screen.
3. Input the track number that you want to play back
with [0] to [9] key.
Playback starts from the track of the input track
number.
• Iftheinputtracknumberdoesnotexistorsearching
with a track number is not allowed, the screen
image will not change.
• Touch[ ] button will close the numerical keypad.
• Touch[ ] Button will close the option window and
display playback screen.
31NX501E/NZ501E
English
English
Owner’s Manual
11. USB VIDEO OPERATIONS
This system can play USB video files (MP4, etc) stored
in an USB memory which is recognized as “USB Mass
Storage Class device” You can use your USB memory
as an audio device by simply copying desired audio
files into it.
Note:
• Thissystemwillnotoperateormayoperateimproperly
with some USB memory.
• FilesprotectedwithanyDRMcannotbeplayed.
Notes on using USB memories
Generalnotes
When no support files, the file list display nothing.
Notesonthefolderstructure
The limitations on the folder structure are same as
those in USB Audio Player mode.
NotesontheTagtitles
The limitations on the Tag titles are same as those in
DVD Audio Player mode.
Select USB Video mode
Connect your USB memory with video files to the USB
connector. The system will automatically detect the
connected device, and the [USB Video] button on
main menu will be enabled.
• WhenanUSBmemoryisalreadyconnected
Touch [USB Video] button on main menu to select the
USB Video mode.
The system changes to the USB Video mode and
starts playback from the previous position or from the
beginning.
Note:
Ifyoureconnectthesamedevicethatyou
disconnected last, the system will play back where it
left off.
Playing video files in USB memory
If the video is playing, touch the screen of the playing
video to display Operation buttons.
* The display will return to the playback screen, if you
do not touch the screen for 10 seconds.
1 2 3 4 5 6
789
1 - Previous Track Button
2 - Play/Pause Button
3 - Next Track Button
4 - Elapsed playing time indicator/Seek bar
5 - Menu Button (Go to list menu mode)
6 - Repeat Button
7 - System time
8 - Bluetooth status
9 - Playback info
Play/Pause Playback
1. Touch [ ] button to Pause playback.
2. Touch [ ] button to resume playback.
Switch to Previous/next file
Press [ ] or [ ] button during playback to play
previous /next file.
• Pressing[ ] button starts playback from the
beginning of the next track.
• Pressing[ ] button starts playback from the
beginning of the current track; when this button is
pressed again within about 5 seconds, playback
starts from the beginning of previous track.
Repeat Playback
* The repeat set as the factory default is Repeat
Folder.
Touch the [
] button once for Repeat Track, again
for Repeat Folder.
Note:
TherepeatinallUSBlesfunctionisnotavailable.
Skip use seek bar
Press the on seek bar and drag it to any position
where you want to start playback.
Switch to USB Video Menu
Press [ ] button playback will be paused, and the
screen will switch to USB Video Menu.
32 NX501E/NZ501E
English
Owner’s Manual
USB Video Menu Operations
1 3 4 5
2
6
7
89
10
11
13
12
14
16
15
1 - Open option menu button
2 - Play/Pause Button
3 - Repeat Button
4 - Shuffle Button
5 - Next Track/Fast Forward Button
6 - Video files in list
7 - Folders in list
8 - Folders area
9 - Playback status info
10 - Album Art
11 - Current file info area
12 - Elapsed playing time indicator/Seek bar
13 - Previous Track /Fast Backward Button
14 - Direct Button
15 - Scan Button
16 - Close option menu button
Play/Pause Playback
On USB Video menu screen, playback status is pause.
Touch [
] button to resume playback. The screen
will go to video screen automatically.
Switch to Previous/next file
Press [ ] or [ ] button during playback to play
previous /next file.
• Pressing[ ] button starts playback from the
beginning of the next track.
• Pressing[ ] button starts playback from the
beginning of the current track; when this button is
pressed again within about 5 seconds, playback
starts from the beginning of previous track.
Stop Playback
1. Press the [ ] button on remote control more than
1 second. Playback is stopped.
2. To resume playback, press the [ ] button.
Playback resumes from the first valid media file of the
folder.
Repeat Playback
* The repeat set as the factory default is Repeat
Folder.
Touch the [
] button once for Repeat Track, again for
Repeat Folder.
Shuffle Playback
1. Touch [ ] button to shuffle the tracks in playing
folder during playback.
2. Touch this button again to turn off the feature.
Current file info area
Thisareadisplaysinfoofcurrentvideole:lename,
number of current file/total number in current folder,
Elapsed playing time/total time of current file.
Skip use seek bar
Press on seek bar and drag it to any position where
you want to start playback.
Select a folder on display list
This operation is same as this in USB Audio mode.
Selecting a track on the display List
This operation is same as this in USB Audio mode.
Folders area
This operation is same as this in USB Audio mode.
Scanning the Tracks
This operation is same as this in USB Audio mode.
Searching with the Track Number
This operation is same as this in USB Audio mode.
33NX501E/NZ501E
English
English
Owner’s Manual
12. iPod/iPhone OPERATIONS
iPod/iPhone can be connected by the special
connector cable (CCA-748) separately sold.
Note:
•Thissystemwillnotoperateormayoperateimproperly
with unsupported versions.
•FordetailedinformationontheplayableiPod/iPhone
models, see our home page: www.clarion.com
Notes on using Apple iPod/iPhone
• DonotconnectaniPod/iPhonetothisunitwitha
headphone connected to the iPod/ iPhone.
• AftertheiPod/iPhonehasbeenconnectedtothis
unit, the buttons of iPod buttons are disabled for
operation in the Music mode. In the Video mode, do
not operate the buttons of iPod.
• WhenintheiPodmode,aspecialiPod/iPhone
control screen is displayed different from the main
screens for other modes.
• WhenintheiPodmode,thescreenimageinput
from the AUX terminal is output to the rear monitor.
• Whennodataispresent,thetitledisplaywillremain
blank.
• TheiPod/iPhoneisusedwiththeequalizerfunction
turned OFF.
• SetthelanguagesettingofiPod/iPhonetoEnglish
before connecting your iPod/iPhone. Some
characters of the other languages may not be
displayed correctly in this system.
Precautions on battery consumption:
If the iPod/iPhone is connected to this unit when the
internal battery of iPod/iPhone has run down, this
function may not operate correctly. You must connect
the iPod/iPhone after charging the battery if it has run
down.
Selecting the iPod Audio mode
Connect your iPod/iPhone to the USB connector via
CCA-748 cable. The system will automatically detect
the connected device and the iPod Audio button will
be enabled for operation on the Main Menu screen.
The playback starts after a while, from where the iPod/
iPhone has been paused.
• WheniPod/iPhoneisalreadyconnected
Touch the [iPod Audio] button on the Main Menu
screen. The system changes to the iPod mode, and
starts playback from the previous position.
Press [MENU] button on Operational Panel to return
to the Main Menu.
Controlling the iPod/iPhone
iPod audio mode screen
1 2 5 6 7 8
101213
3
4
11
8
14
15
1. [ ] Settings Button
Displays the Options screen. You can specify play
modes and other settings from this screen.
2. [ ] Previous Track Button
3. [ ] Repeat Button
Use to repeat the selected track.
Press once to start a single track repeat. Press again
to activate a repeat all. To turn repeat off, press same
button again. Repeat symbols are displayed in the info
window in the upper left area of the screen.
[
]:Allrepeat.
[ ]:1-Trackrepeat.
[ ]:Repeatoff.
4. [ ] Play/Pause Button
Use to control playback and pause.
(1). Touch the key during playback. Playback pauses.
(2). To resume playback touch the key again.
5. [ ] Shuffle Button
Use to switch the shuffle mode on or off. When
enabled, this function performs playback of tracks in
random order, regardless of the order in which they are
recorded.
[
]:ShufeOff.
[ ]:SongShufe.
34 NX501E/NZ501E
English
Owner’s Manual
6. [ ] Next Track Button
7. ID3 Information
Touch the area of the ID3 Information to display the
current play list.
Touch the [
] icon can return to ID3 information
display.
8. Next Page [ ] / Previous Page [ ] Button
9. Category List
Select different category songs to play. The category
is same as the iPod/iPhone.
10. [ ] System Time
11. Bluetooth Status
12. MUTE Status
13. Playback Status
14. Art Work
15. Progress bar
iPod audio settings mode screen
16
17
16.SimpleControl:
If the Simple Control is set to [ ]. The screen will
become to Simple Control Mode. It can also display
the video of iPod/iPhone regardless it is iPod Audio
or iPod Video mode. But only “Previous Track”, “Play/
Pause” and “Next Track” can be operated. (Refer
to 17)
17. [ ] Close the Settings Page
18
18. Display video of iPod/iPhone.
Follow operation steps to display video of iPod/iPhone
in Simple Control Mode.
• ConnecttheiPodtoUSBconnectorviaCCA-748
cable.
• SelectiPodAudiomode.
• Pressthe[ ] button on iPod audio mode screen
to display Settings page.
• SettheSimpleControlto“On”.
• Press[ ] button.
• SetiPodVideosettingsTVOutto“ON”iniPod.
• NowplayvideofromiPod
• VideoofiPodwilldisplayonthescreen.
• iPhoneandiPodToucharenotsupportedwith
video output in Simple Mode.
19 2120 22 23 24
19. [ ] Previous files
20. [ ] Play or Pause video
21.
[ ] Next files
22. Progress bar
The “Progress bar” is not available on this screen.
23.
[ ]Menu:
Press the Menu button can display the Simple Control
Mode.
24. [ ] Repeat
The “Repeat” Button can’t operate on this screen.
35NX501E/NZ501E
English
English
Owner’s Manual
Skipping a track (Simple Control Mode)
Press the [ ] or [ ] button during playback.
Tracks are skipped, as many times as the button is
pressed, and playback starts.
• Pressingthe[ ] button starts playback from
the beginning of the next track.
• Pressingthe[ ] button starts playback from
the beginning of the current track.
When this button is pressed again within about
2 seconds, playback starts from the beginning of the
previous track.
Note:
InSimpleControlMode,thebestwayistocontrol
theiPodjustoniPod.
Selecting a list item from a list screen
(1). Touch the list screen and flick up or down to scroll
the list.
(2). Touch a desired list item on the screen to display
the corresponding list of tracks.
(3). Touch the desired track name on the list to play it.
iPod audio List mode screen
25 26
27
25. Return to the Previous Level Folder
[ ] If the list is in root, press the button can close
the list.
26. [ ] Closed the List
27. Search with the first alphabet in current list.
Selecting the iPod Video mode
Connect your iPod/iPhone to the USB connector via
CCA-748 cable. The system will automatically detect
the connected device and the iPod Video button will
be enabled for operation on the Main Menu screen.
• WhenaniPod/iPhoneisalreadyconnected
Touch the [iPod Video] button on the Main Menu
screen. The system changes to the iPod Video mode,
and starts playback from the previous position.
Press [MENU] button on Operational Panel to return
to the Main Menu.
• ViewingvideodataintheiPod/iPhone(onlyforthe
iPod/iPhonewithvideofeatures)
When you connect an iPod/iPhone with video features
byusingtheoptionalCCA-748cable,youcanenjoy
the video data and slide show data stored in the iPod/
iPhone and show them on the display of this unit (and
the rear monitor if connected).
• iPodVideoID3modescreen
Press [ ] button to display iPod Video play mode
screen.
36 NX501E/NZ501E
English
Owner’s Manual
iPod Video List mode screen
• iPodVideoSettingsmodescreen.
• iPodVideoSimpleControlModeScreen
• iPodVideoplaymodescreen.
3 4
1 2
1. iPod Video Title.
2. Elapsed playing time.
3. [ ]Menu:
Press the Menu button can display the iPod Video
mode screen.
4. [ ]RepeatButton:
Use to repeat the selected track.
Press once to start a single track repeat. Press again
to activate a repeat all. To turn repeat off, press same
button again. Repeat symbols are displayed in the info
window in the upper left area of the screen.
In iPod Video mode screen, there are three repeat
icons:
[ ]:RepeatAll.
[ ]:Repeat1Track.
[ ]:Repeatoff.
Note:
The operation keys in iPod video mode are as same as
iPodAudiomode.PleaserefertotheiPodAudioMode
operation key.
Note:
Video playback is not available on all iPod/ iPhone
devices. Please contact your Clarion dealer for details.
An optional connection cable or accessory may be
required for this feature.
Note:
•“AUDIOONLY”isdisplayedwhentheautomobileis
moving.
•Imagedatamaynotbeplayedbackaccordingtothe
status of the iPod/iPhone
•Thevolumesettingofvideodataisrelativelylowerthan
audio data. Be sure to lower the volume setting before
switching to the other mode.
•Donotselectthecategorieswithnotrackregistered
from the iPod menu screen. The iPod/iPhone may be
frozen.IftheiPod/iPhoneisfrozen,resettheiPod/
iPhone by following the procedure described in the
instruction manual of the iPod/iPhone.
•Audiomaybeplayedbackslightlyoutof
synchronization with video images.
37NX501E/NZ501E
English
English
Owner’s Manual
13. Bluetooth AUDIO PLAYER OPERATIONS
Some Bluetooth cellular phones have audio features,
and some portable audio players support the
Bluetooth feature. These devices will be called as
“Bluetooth audio players” in this manual. This system
can play audio data stored in a Bluetooth audio player.
Note:
•Thissystemwillnotoperateormayoperateimproperly
with some Bluetooth audio players.
•FordetailedinformationontheplayableBluetooth
audio players, see our home page: www.clarion.com
Selecting the Bluetooth Audio mode
1. Press [MENU] button on Operational Panel to return
to the Main Menu.
2. Touch the [Bluetooth Audio] key to select the
Bluetooth Audio mode.
The system changes to the Bluetooth mode. If the
connection with a Bluetooth audio player has been
already established, you may select the Music
function.
• WhentheconnectionwithaBluetoothaudioplayer
has been established, the [ ] icon is displayed at
the top of the screen.
Bluetooth audio player settings
ConrmingBluetoothInformationandsettingPass
Key
You can confirm various information concerning about
the Bluetooth Interface features.
1. Touch the [ ] key to display the information on the
screen.
2. When you finish confirming the Bluetooth
information, touch the [ ] key to return to the
previous screen.
If you want to change the Pin Code setting of this unit,
perform the following steps.
• Thefactorydefaultsettingis“1234”.
3. Touch the text box of the Pin Code item to display
theTen-KeyPadscreen.
4. Enter your desired 4-digit PIN number, and then
touch the [ ] key.
Note:
MICGainisdisabledinBluetoothAudiomodesettings.
Registering your Bluetooth audio player
(Pairing)
You can register up to 5 Bluetooth audio players.
1. Turn on the power of the Bluetooth audio player you
wish to register.
2. Touch the Device key [ ] to display the Device
Select screen.
3. Touch the [ ] key to display the Inquiring Device
screen.
38 NX501E/NZ501E
English
Owner’s Manual
4. Touch your desired Device and press the [ ]
key to register for the Bluetooth audio player.
5.IfenteringthePassKeycodeispromptedonyour
Bluetoothaudioplayer,enterthePassKeycodeset
to this unit.
• YoucanchangethePasskeysettingofthisunit
from the BT Info screen.
• Youalsocanaddthefavoriteicontotheconnected
device. There are 10 favorite icons for selection.
When the pairing operation completes, the registered
Bluetooth audio player is set as the current device,
after selecting the favorite icon, the display return to
the device list screen. Press [
] button, the display
will return to the Bluetooth audio mode screen.
Note:
•YoucannotregisterthesameBluetoothaudioplayer
whichisalreadyregistered.Ifyouwishtochangethe
Device key registered, once delete the corresponding
Bluetooth audio player from the previous Device key,
and then register it again to your desired Device key.
•TodeletetheBluetoothaudioplayerregistration
1. Touch the [ ] key to delete the device.
A confirmation screen is displayed.
2. Touch the [ ] key to confirm delete.
Selecting the Bluetooth audio player
To change the current Bluetooth audio player to the
other device which is already registered, perform the
following operation.
1. Touch the Device key to [ ] display the Device
Select screen.
2. Touch the currently connected device, then press
the [ ] key to disconnect the active device.
3. Touch the desired Device key you wish to use.
Press [ ] key to select it as your active device.
The corresponding cellular phone is set as current
telephone.
• Ifthepowerofthecellularphoneisnotturnedon,
turn it on.
• Thecellularphonemayprompttoacknowledgethe
BluetoothconnectionorasktoenterthePassKey
code of this unit.
Perform these operations according to the message
displayed.
4. Touch the [ ] key to return to the previous
screen.
Controlling the Bluetooth audio player
Note:
•Occasionally,dependingontheenvironment,playback
sounds may be fragmented, or switch noises may be
generated.
Playing a music
After the connection with a Bluetooth audio player is
established, the play mode is automatically engaged.
• Whenplaybackisnotstartedforsomedevices,
touch the [ ] key manually.
Pausing playback
1. Touch the [ ] key during playback.
Playback pauses.
2. To resume playback, touch the [ ] key. Playback
resumes.
Skipping a track (searching)
3. Press the [ ] or [ ] button during playback.
Tracks are skipped, as many as the times the button is
pressed, and playback starts.
Stopping playback
4. Press the [ ] button during playback.
Tracks are stopped, press the [
] button to
playback the first Track.
39NX501E/NZ501E
English
English
Owner’s Manual
When the connection with your Bluetooth cellular
phone is established, the following functions are
availableonthisunit:
• Listeningtoyourtelephonecallsonthecar
speakers.
• Answeringtoanincomingcall.
• MakingacallusingtheTen-Keypadscreen.
• MakingacallusingthePhoneBookdatainthe
selected cellular phone.
• MakingacallusingtheHistorydataofthedialed/
received calls.
Note:
•Somecellularphonesmaynotbeabletotransferthe
Phone Book data to head unit.
•ThePhoneBookdatatransmissionmaytakealong
time. The operations of sending calls are disabled
during the data transmission.
•Youcantalkwithotherpartybyusingtheinternal
microphone. When it is hard to hear for the other party
in accordance with the communication condition or the
used telephone, please use the optional microphone
(RCB-199),andsettheMicrophoneSelectsettingto
“External”. The sound will be improved, but noises
may still be heard depending on the communication
condition.
Select the BT Phone mode
1. Press [MENU] button on Operational Panel to return
to the Main Menu.
2. Touch the [Bluetooth Telephone] key to select the
Bluetooth Telephone mode.
The Telephone screen is displayed.
• WhennoBluetoothTelephoneconnected,theicon
[
] is displayed at the top of the screen.
• WhentheconnectionwithaBluetoothTelephone
has been established, the icon [ ] and signal level
indicator are displayed at the top of the screen.
Bluetooth Telephone settings
ConrmingBluetoothInformationandsettingPass
Key
You can confirm various information concerning the
Bluetooth Interface features.
1. Touch the [ ] key to display the information on the
screen.
2. Perform setting for the desired item. See the
following sections for detail.
3. When you finish confirming the Bluetooth
information, touch the [ ] key to return to the
previous screen.
IfyouwanttochangethePassKeysettingofthisunit,
perform the following steps.
1.TouchthetextboxofthePassKeyitemtodisplay
theTen-KeyPadscreen.
• Thefactorydefaultsettingis“1234”.
2. Enter your desired 4-digit PIN number, and then
touch the [ ] key.
14. Bluetooth
TELEPHONE OPERATIONS
40 NX501E/NZ501E
English
Owner’s Manual
SettingAutomaticConnection
The system automatically reconnects the cellular
phone after the connection is lost or the system is
restarted.
• Thefactorydefaultsettingis“OFF”.Touchthe
[
] or [ ] key of the Automatic Connection
item to set the function ON or OFF.
SettingAutomaticAnswer
If a call comes in, answer automatically after
5 seconds.
• Thefactorydefaultsettingis“OFF”.Touchthe
[
] or [ ] key of the Automatic Answer item to
set the function ON or OFF.
SelectingMicrophone
You can select the microphone to be used.
• Thefactorydefaultsettingis“Internal”.Touchthe
[
] or [ ] key of the Microphone Select
item to set the function.
SettingMicrophoneGain
Youcanadjusttheinputlevelofthemicrophonein
16 levels.
• Thefactorydefaultsettingis“7”.
• TouchthelevelindicatorbuttonoftheMicrophone
Gainitemtoadjusttheinputlevel.
Note:
•Theinputlevelofthemicrophonecanbeaffectedby
itssurroundings.Adjustthelevelifthepersononthe
other end of the telephone has a reception problem.
Register your cellular phone (Pairing)
You can register up to 5 cellular phones. The
registering method is as same as “Registering your
Bluetooth audio player”.
1. Turn on the power of the cellular phone you wish to
register.
2. Touch the Device key [ ] to display the Device
Select screen.
3. Touch the [ ] key to display the Inquiring Device
screen.
4. Touch your desired Cellular key to select the key
for the cellular phone to be registered. And press
the [
] key to register for the Bluetooth audio
player.
• YoucannotselecttheCellularkeyofwhich
another cellular phone is already registered.
Select a blank Cellular key.
5.IfenteringthePassKeycodeispromptedonyour
cellularphone,enterthePassKeycodesetinthis
unit.
• YoucanchangethePasskeysettingofthisunit
from the BT Info screen under the Telephone
Settings screen.
• Youcanalsoaddthefavoriteicontothe
connected device. There are 10 favorite icons for
selecting.
When the pairing operation completes, the
registered cellular phone is set as the current
telephone, and the display returns to the
Telephone screen.
41NX501E/NZ501E
English
English
Owner’s Manual
Note:
•Youcannotregisterthesamecellularphonewhichis
alreadyregistered.IfyouwishtochangetheCellular
key registered, once delete the corresponding cellular
phone from the current Cellular key, and then register it
again to your desired Cellular key.
•Todeletethecellularphoneregistration
1. Touch the [ ] key to delete the device.
Aconrmationscreenisdisplayed.
2. Touch the [ ]keytoconrmdelete.
Select the cellular phone
To change the current cellular phone to the other
device which is already registered, perform the
following operation.
1. Touch the [ ] key to display the Device Select
screen.
2. Touch the currently connected device, then press
[
] key to disconnect the active device.
3. Touch the desired Device key you wish to use. Press
[
] key to select it as your active device. The
corresponding cellular phone is set as the current
telephone.
• Ifthepowerofthecellularphoneisnotturnedon,
turn it on.
• Thecellularphonemayprompttoacknowledgethe
BluetoothconnectionortoenterthePassKeycode
of this unit. Perform these operations according to
the message displayed.
4. Touch the [ ] key to return to the previous
screen.
Obtaining the Phone Book data
Sending the Phone Book data from the cellular phone
enables you to make a call using the Phone Book
function from this unit.
1.PerformtheObjectPushtransferoperationofthe
Phone Book data on the current cellular phone.
For details of the operation, see the operation manual
of the cellular phone.
Note:
•Somecellularphonesmaynotbeabletotransferthe
Phone Book data.
•SomecellularphonescannottransferthePhoneBook
datawhenthehands-freemodeissetoritisalso
registeredintheBluetoothmode.Inthosecases,
disable these functions from the cellular phone before
performingtheObjectPushtransfer.
•SomecellularphonesmaytransferPhoneBookdata
automatically.
Telephone operations
Making a call using the Ten-Key pad
1. Touch the [ ]keytodisplaytheTen-Keypad
screen.
2.EnterthetelephonenumberbyusingtheTen-Key
pad displayed on the screen.
3. Touch the [ ] (Send) key to call the entered
number.
• ThefollowingTelephoneInterruptscreenis
displayed during phone call.
• Touchthe[ ] key to talk by using the cellular phone
and canceling the hands-free function (Private
Mode). To return to the hands-free mode, touch the
[
] key again.
• Touchthe[ ] key to mute the microphone.Now you
can hear the other side, but the other side cannot
hear your side.
• Touchthe[ ] key to hold the current phone call,
now you can answer to the other incoming call.
Touch again to talk with previous call
4. When the call is finished, touch [ ] key to hang
up.
Note:
•Dependingonsomespecialcellularphone,the
TelephoneInterruptscreenmaybeclosedandthe
connection with this system may be disconnected
when entering the Private mode.
42 NX501E/NZ501E
English
Owner’s Manual
Making a call using the Phone Book
You can use the Phone Book data obtained from the
cellular phone to make a call from this unit.
Note:
•Beforeusingthisfunction,thePhoneBookdatamust
be sent from the cellular phone.
•OnlythePhoneBookitemswithatleastonetelephone
number registered in the captured Phone Book data
are displayed on the Phone Book screen.
1. Touch the [ ] key to display the Phone Book
screen.
2. Touch the desired Name key you wish to dial.
• Flickthelistupanddowntoscrollthelist.
3. Touch the [ ] key to call the specified number.
The Telephone Interrupt screen is displayed, and
calling starts.
• Whenthecallisnished,touchthe[ ] key to
hang up.
Making a call using the History
The system will memorize the Dialed/Received calls
record data in the memory. You can confirm it and use
it to make a call from this unit.
1. Touch the [ ] key. The History List screen is
displayed.
• TheitemsaresortedbyDialed,Missedand
Received calls.
• Flickthelistupanddowntoscrollthelist.
2. Touch the desired History item key you wish to dial.
3. Touch the [ ] key to call the specified number.
The Telephone Interrupt screen is displayed, and
calling starts.
• Whenthecallisnished,touchthe[ ] key to
hang up.
Answering to an incoming call
When a call comes in, the following Telephone
Interrupt screen appears.
You can answer to the incoming call on this system by
the following operation.
1. Touch the [ ] key to answer the call.
2. When the call is finished, touch the [ ] key to
hang up.
43NX501E/NZ501E
English
English
Owner’s Manual
15. RADIO OPERATIONS
Listening to the Radio
1. Touch the [Tuner] button on the Main menu display.
The tuner mode screen is displayed.
2. Press the [FM1/2/3/AM] button or touch the [Band]
key on remote control to select the radio band. Each
time the button is pressed, the radio reception band
changesinthefollowingorder:
FM1->FM2->FM3->AM ->FM1...
1 32
8
9
4
6
5
11
7
10
1. Preset Scan Button
2. Direct Button
3. Preset List Button
4. Frequencies Display
5. Tune Up
6. Tune Down
7. Band Display
8. LOC/DX Display
9. Bluetooth Display
10. RDS Station Display
11. System Time
Seek Tuning
1. Press the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [ ] key, and then flick the BIG
Frequency up and down to search for next available
station.
• Whenickthefrequencyup,thestationissearched
in the direction of higher frequency.
• Whenickthefrequencydown,thestationis
searched in the direction of lower frequency.
Step Tuning
1. Press the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] key in frequency panel to tune
up or down by one step.
Recalling a preset station
1. Press the [FM1/2/3/AM] button to select the desire
band (FM or AM) on the tuner.
2. Touch the [ ] key, Press the preset station
(1 to 6) on preset list.
3. Press the [ ] key, then press the [ ] button to
auto search and store the stations.
Manual memory
1. Touch the desired Band key to select the band you
wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3. Touch and hold the desired Preset key you want to
store for about 3 seconds.
Auto Store
The Auto Store is a function for storing up to 6 stations
that are automatically searched in sequentially. If the
number of receivable stations cannot reach to 6, the
previous stored station remains.
1. Touch the [FM1/2/3/AM] key to select the desired
band. (FM or AM)
2. Press the [ ] key, and then press the [ ] key to
start the Auto Store.
A beep sounds and the stations with good reception
are stored automatically to the preset list.
44 NX501E/NZ501E
English
Owner’s Manual
Preset Scan
The Preset Scan receives the stations stored in the
preset memory in order. This function is useful when
searching for the desired station in memory.
1. Touch the [FM1/2/3/AM] key to select the desired
band. (FM or AM)
2. Touch the [ ] key to start the Preset Scan.
The unit starts scanning each station for 10 seconds
sequentially. But the station stored is not a valid
station; the scanning time is only 2 seconds.
3. When the desired station is tuned in, touch the
[
] key again to stay in that station.
LOC/DX Setting
The DX / LOC setting changes the tuner sensitivity in
order to separate closely spaced stations. This feature
is useful in areas that have many radio stations in
close proximity.
1. Touch the [ ] key to switch to LOCAL tuner
sensitivity.
2. Touch the [ ] key to switch to DX tuner
sensitivity.
16. RDS OPERATIONS
This unit has a built in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the broadcast
station being received (PS), and can automatically
switch to the broadcast station with the best reception
as you move long distances (AF switching). Also, if a
traffic announcement or program type information is
broadcast from an RDS station, no matter what mode
you are in, this broadcast is received. Additionally, if
EON information is received, this information enables
automatic renewal of other preset stations on the
same network and interruption of traffic announcement
from other stations .
This function is not available in some areas.
“AF”: Alternative Frequency
“PS”: Program Service Name
“PTY”: Program Type
“TP”: Traffic Program
•TheRDSinterruptdoesnotworkduringAMradio
reception.
10 1211
4 5
9
13
14
1 2 3
7
6
8
16
15
17
18
19
20
2221 23
1. Band Display
2. LOC/DX Display
3. Frequencies Display
4. RDS Station Display
5. Time Display
6. PS Name Display
7. Program Type Display
8. Radio text Display
9. Setting Button
10. Preset Scan Button
11. Direct Button
12. Preset List Button
13. Tune Down
14. Tune Up
15. TA Setting
16. AF Setting
17. REG Setting
18. LOC/DX Mode Setting
19. PTY Setting
20. Return Button
21. PTY Seek
22. Auto Store
23. Program Type Setting and Display
45NX501E/NZ501E
English
English
Owner’s Manual
AF (Alternative Frequency) function
The AF function switches to a different frequency
on the same network in order to maintain optimum
reception.
SwitchingON/OFFtheAFfunction
1. Touch the [ ] key.
2. Touch the [ ] or [ ] key of the AF item to
turn the function on or off.
• WhentheAFfunctionisON,“AF”willbedisplayed
at the top of the screen.
• Ifthereceptionofthecurrentbroadcaststation
deteriorates durably, “AF” indication will blink, and
this unit searches for the same program on another
frequency.
REG (Regional Program) function
When the REG function is ON, the optimum regional
station can be received. When this function is OFF, if
the regional station area is switched as you drive, a
regional station for that region is received.
Note:
•Thisfunctionisdisabledwhenanationalstationsuch
as BBC R2 is being received.
•TheREGfunctionON/OFFsettingisenabledonlywhen
theAFfunctionisON.
SwitchingON/OFFtheREGfunction
1. Touch the [ ] key.
2. Touch the [ ] or [ ] key of the REG item to
turn the function on or off.
TA (Traffic Announcement) function
When a traffic announcement broadcast starts during
the TA standby mode, the traffic announcement
broadcast is received as top priority regardless of
the function mode, so you can listen to it. The Traffic
Program (TP) automatic tuning is also available.
SettingTAstandbymode
1. Touch the [ ] key.
2. Touch the [ ] key of the TA item to set the TA
standby mode.“TA” will be displayed at the top of
the screen, and the system will automatically search
foraTPstation(TPSEEK).WhenanRDSbroadcast
station with traffic announcement program is
received, “TP” will be displayed at the top of the
screen.
Note:
•IfnoTPstationisreceived,thissystemcontinuesthe
search operation. Performing the above procedure
again makes the “TA” go off, and stops TP station
searching.
CancelingaTrafcAnnouncementbroadcast
Touch the [Cancel] key while a Traffic Announcement
broadcast is being received. The Traffic Announcement
broadcast reception is canceled, and the system goes
into the TA standby mode.
CancelingTAstandbymode
1. When “TA” is displayed on the screen, touch the
[
] key.
2. Touch the [ ] key of the TA item.
“TA” on the screen goes off, and the TA standby mode
is canceled.
PTY (Program Type) function
This function enables you to listen to a broadcast of
the specified program type when the broadcast starts,
even if the system operates in a mode other than the
Tuner mode.
• SomecountriesdonotyethavePTYbroadcast.
•IntheTAstandbymode,aTrafcAnnouncement
broadcast station has priority over a PTY broadcast
station.
SelectingPTY
1. Touch the [ ] key.
2. Touch the [ ] key of the PTY item to enter the
PTY standby mode.
3. Touch the [ ] key (program type display) to
display the PTY Select screen.
4. Touch your desired PTY Preset key to select the
program type.
5. Touch the [ ] key to return to the previous
screen.
CancelingPTYstandbymode
1. Touch the [ ] key.
2. Touch the [ ] key of the PTY item.
“PTY” goes off, and the PTY standby mode is
canceled.
PTYseek
1. Touch the [ ] key.
2. Touch the [ ] key (program type display) to
display the PTY Select screen.
3. Touch your desired PTY Preset key to select the
program type.
4. Touch a Seek key, the system seeks a PTY
broadcast moving up the frequencies.
• The29typesofPTYlistedbelowcanbeselected.
46 NX501E/NZ501E
English
Owner’s Manual
PTY item
ENGLISH Contents
News News
Affairs Current Affairs
Info Information
Sports Sport
Educate Education
Drama Drama
Culture Culture
Science Science
Varied Varied
Pop M Pop Music
Rock M Rock Music
Easy M Easy Listening Music
Light M Light Classical Music
Classics Serious Classical Music
Other M Other Music
Weather Weather
Finance Finance
Children Children’s Programs
Social Social Affairs
Religion Religion
Phone In Phone In
Travel Travel
Leisure Leisure
Jazz Jazz Music
Country Country Music
Nation M National Music
Oldies Oldies Music
Folk M Folk Music
Document Documentary
Emergencybroadcast
If an emergency broadcast is received, all the function
mode operations are stopped. “Alarm” appears on the
screen and the emergency broadcast can be heard.
Volume setting of TA
The volume for TA, interrupts can be set during TA .
• Thefactorydefaultsettingis“15”.
1. Use the [VOL +] and [VOL –] buttons to set the
volume to the desired level (00 to 40) during a TA .
• WhentheTAends,thevolumereturnstothelevel
before the interrupt.
47NX501E/NZ501E
English
English
Owner’s Manual
17. DVB-T OPERATIONS
If DTX501E sold separately connect to unit, you can watch TV program and operate DTX501E.
Please read the user manual of DTX501E for the operation of DVB-T mode.
This function is available when DTX501E is connected.
Note:
Foryoursafety,theunithasasafetyfunction,whichturnsoffthepicturewhencarismoving,soonlytheaudiocanbe
heard. The picture can be only watched, when the car is stopped and parking brake is applied.
Switching to DVB-T mode
• Press[DVB-T] button on Main Menu to select desired mode (when unit is reading). The LCD will display the
external video. If there is no DVB-T signal, it will show you blank screen.
• Press[Menu] button on Operational Panel to return to the Main Menu.
48 NX501E/NZ501E
English
Owner’s Manual
18. AUX 1 / AUX 2 OPERATIONS
External peripheral devices, including a game console, camcorder, iPod/iPhone, etc. can be connected to the
AUX 1 or AUX 2 connector on the front or back of this unit using the A/V media cables.
Switching to AUX IN / AV IN mode
• Press[AUX 1] or [AUX 2] button on Main Menu to select desired mode (when unit is connected). If the external
device connected to AUX 1or AUX 2 input have audio signal, the unit will broadcast audio of external device.
• Press[Menu] button on Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX 1or AUX 2 input.
19. CAMERA OPERATIONS
Switching to Camera mode
Press [Camera] button on Main Menu to select desired mode.
The LCD will display the external camera video. The screen will display “No Video Signal” menu, if a valid camera
is not connect to this head unit.
Press Menu button on Operational Panel to return to the Main Menu.
Note:
Ifthereversecableisconnectedcorrectlytothecar,thecenterunittoswitchtocameramodeautomaticallywhenthe
car is in reverses.
49NX501E/NZ501E
English
English
Owner’s Manual
20. REAR SOURCE OPERATIONS
If rear monitors are installed in the rear seat and
connected to the rear zone AV output, passengers in
the back seats can watch the DVD/iPod Video/AUX1/
AUX2 video separately from front source.
1 2
1. Press the button to access the rear source menu.
2. Press the button again to back to front source
menu.
Multi-Zone Operation
Independent sources can be played simultaneously
on the unit. For example, a FM/AM console can be
playback on the front screen while DVD video is
available to rear passengers. But now you can’t select
DVD video in front.
DVD Video in Rear
1 2
7
3 4 5 6
1. [ ]:NextRowButtons
Press the button can display the hidden button.
2. [ ]:Previouschapter.
3. [ ]:PlayorPausevideo.
4. [ ]:Nextchapter.
5. Elapsed playing time indicator.
6. [ ] Top Menu Button
7. [ ]/[ ]:Front/Rearswitchingbutton
If the screen displays Rear Source, press [ ] to
switch to Front Source.
If the screen displays Front Source, Press [
] to
switch to Rear Source.
8 9
7
10 11 12
8. [ ]: Repeat switching Button
Use to repeat the Title or Chapter.
Press once to start Chapter repeat. Press again to
activate Title repeat. To turn repeat off, press same
button again. Repeat symbols are displayed in the info
window in the upper left area of the screen.
9. [ ]:AudioChannelswitchingButton
10. [ ]:SubtitleswitchingButton
11. [ ]:INFOButton
12. [ ]:DirectchapterortitlesearchingButton
DVD Video Rear Source Control Info mode.
Press [ ] button to return.
50 NX501E/NZ501E
English
Owner’s Manual
DVD Video Rear Source Control Direct mode.
Note:MoredetailpleaserefertoDVDVideoFront
source.
AUX 1 in Rear
AUX 2 in Rear
iPod Video in Rear
iPod Video Rear Source Control Play Mode
1 2
7
3 4 5 6
1. [ ]:Previousle.
2. [ ]:PlayorPausevideo.
3. [ ]:Nextle.
4. Elapsed playing time indicator.
5. [ ]Menu:
Press the Menu button can display the iPod Video
Rear Source mode screen.
6. [ ] Repeat Button(Same as iPod function of
front source )
7. [ ]/[ ]:Front/Rearbutton
If the screen displays Rear Source, press [ ] to
switch to Front Source.
If the screen displays Front Source, Press [
] to
switch to Rear Source.
iPod Video Rear Source ID3 Mode
Note:
Ifthesourceisselectedasthefront,thesourceinrear
can’t be selected.
Ifthesourceisselectedastherear,thesourceinfront
can’t be selected.
PresstheFrontButton to access the front main
menu but the rear source will keep running.
Remote Control in Rear
Remote Control is always available for the front
source, however, it is available for the rear source if the
screen displays Rear Source Control of DVD Video or
iPod Video.
51NX501E/NZ501E
English
English
Owner’s Manual
21. SETTING OPERATIONS
Press [ ] button on the Main menu screen.
The Setting menu screen will be displayed.
General Setup Menu
Clock: Set system clock.
AM/PM: Set AM or PM when current time mode is
12HR mode.
Clock Mode: Set the time display mode.
Beep: Turn on or turn off the beep confirmation sound.
Bluetooth: Set the Bluetooth ON or OFF.
Wallpaper: Choose the desired wallpaper.
Auxin Input SW: Auxin input switch, including Low,
Mid, High.
Dimmer: There are three options, Day, Night and Auto.
Tel Speaker: There are two options, Left and Right.
For example, if current setting is Left, when BT phone
is coming in, only left speaker can hear the phone.
TFTautoopen:WhenitisOnandtheACCpoweron,
the TFT opens automatically. (NZ501E only)
CameraInputFormat:SetthePAL/NTSCaccordingto
the camera.
Version: Display the software version information.
Video Setup Menu
Thismenuincludes:DVDWideScreenMode;
Brightness.
DVD Wide Screen Mode: Set the DVD wide screen
mode on or off.
Brightness: Set brightness value from 0 to 20.
Audio Setup Menu
Thismenuincludes:Balance,Fader,SelectEQ,Sub
Woofer Ctrl, Sub Woofer Phase, High Pass Filter, low
Pass Filter, Amp Cancel and Magna Bass EX.
52 NX501E/NZ501E
English
Owner’s Manual
Balance: Choose the desired volume for left and right
speaker.
Fader: Choose the desired volume for front and rear
speaker.
Select EQ:
Choosethedesiredmode:BassBoost,
Impact, Excite, Custom and OFF.
Sub Woofer Ctrl: Choose the desired sub woofer gain
from 0 to 14.
Sub Woofer Phase: Choose the sub woofer phase
normal or reverse.
High Pass Filter: Choose the high pass filter
through/55Hz/85Hz/120Hz.
Low Pass Filter: Choose the low pass filter
through/62Hz/95Hz/135Hz.
Amp Cancel: Choose the amplifier audio output on
or off.
Magna Bass EX: Choose the loudness on or off.
Navigation Setup Menu
Thismenuincludes:GPSTime,NaviInterrupt,and
Voice Guidance
GPS Time: Set the system time to be synchronized
with GPS local time or not.
Navi Interrupt:
Therearethreechoose:On/Popup/
Off.“On”:ThenavigationscreenwillcovertoAV
screenwhenreachingsomekeypoint.“Popup”:When
small turn info window will pop up in the top of the
AVscreentoindicatethekeypoint.“Off”:Turnoffthis
function.
Voice Guidance: Enable or disable the navigation
voice guidance.
Others Setup Menu
Thismenuinclude:SetPassword;Parentalcontrol,
Audio Language,Subtitle Language,Blinking, TS
Calibrate, and Load Factory.
Set password: Set the password for DVD parental
control.
Parental control: Set the rating of the age. It contains
KidSafe/G/PG/PG-13/PG-R/R/NC-17/Adult.
Audio Language: Set the Language for DVD Audio.
Subtitle Language: Set the Language for DVD subtitle.
PTY Language: Set the Language for PTY name.
Blinking: Choose the blinking ON or OFF.
TS Calibrate: The function of it is to select the Touch
Screen Calibrate YES or NO.
Load Factory: The function is to select to load factory
default or not.
Set the Anti-Theft code
1. If your unit is unlocked, hold the [ ] button
more then 2 seconds, then the Anti-Theft setting
mode will display. Users can change anti-theft code.
Click [Yes], the numerical keypad is displayed. Enter
the new password twice, then anti-theft code is set
and your unit is secured.
53NX501E/NZ501E
English
English
Owner’s Manual
22. MONITOR OFF
Long Press Menu button on Operational Panel for 3 seconds, it will show “Monitor off……Touch the screen to
return” and then the head unit will turn off the TFT screen. Touch any place of the screen, the TFT screen will turn
on again.(NX501E only)
When the Anti-theft is “On”, you need enter correct
Anti-theft code to turn the unit on. If you enter wrong
code three times, the unit is locked, and must be
unlocked by the professionals.
2. If your unit is secured, hold the [ ] more
then 2 seconds, then the Anti-Theft setting mode will
display. The numerical keypad is displayed, enter the
right code to unlock.
54 NX501E/NZ501E
English
Owner’s Manual
23. TROUBLESHOOTING
GENERAL
DVD PLAYER
Problem Cause Measure
Power does not turn on.
(No sound is produced.)
Fuse is blown.
Replace with a fuse of the same
amperage. If the fuse blows again,
consult your store of purchase.
Incorrect wiring. Consult your installation center.
Nothing happens when buttons
are pressed.
Display is not accurate.
The microprocessor has
malfunctioned due to noise, etc.
Press the reset button with a thin rod.
Note:
When the Reset button is pressed, turn
off the power.
* When the Reset button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
The remote control unit does
not work.
Direct rays of the sun fall on the
light-receptive part of the remote
control unit.
When direct rays of the sun fall on
the light-receptive part of the remote
control unit, it may not work.
The battery of the remote control
unit is dead or there is no battery in
the remote control unit.
Check the battery of the remote control
unit.
Problem Cause Measure
Disc cannot be loaded.
A disc is already loaded.
Ejectthediscbeforeloadingthenew
one.
There is foreign matter already in
the disc slot.
Remove the foreign matter, or consult a
service station.
Sound skips or is noisy.
Disc is dirty. Clean the disc with a soft cloth.
Disc is heavily scratched or
warped.
Replace with a disc in good condition.
Sound is bad directly after
power is turned on.
Condensation may form on the
internal lens when the car is parked
in a humid place.
Let dry for about 1 hour with the power
on.
Video images are not
displayed.
The parking brake is not engaged.
Check that the parking brake is
engaged.
Disc cannot play with
the display “PARENTAL
VIOLATION” shown.
Feature exceeds set parental level.
Release the view limitation or change
the parental level.
See the subsection “Setting up the
parental level”.
55NX501E/NZ501E
English
English
Owner’s Manual
USB DEVICE
Problem Cause Measure
USB device cannot be inserted.
The USB device has been inserted
with wrong direction.
Reversing the connection direction
of the USB device, try it again.
The USB connector is broken. Replace with a new USB device.
USB device is not recognized.
The USB device is damaged. Disconnect the USB device and
reconnect. If the device is still not
recognized, try replacing with a
different USB device.
Connectors are loose.
No sound heard and no file display
on file list
No MP3/WMA file is stored in the
USB device.
Store these files properly in the
USB device.
Sound skips or is noisy.
MP3/WMA files are not encoded
properly.
Use MP3/WMA files encoded
properly.
The video of iPod/iPhone image is
disturbed
The TV Signal setting of the iPod/
iPhone is not set correctly.
Set the TV Signal setting (NTSC/
PAL) of the iPod/iPhone correctly.
Bluetooth
Problem Cause Measure
Cannot pair the Bluetooth enable
device with the car audio system.
The device does not support the
profiles required for the system.
Use another device to connect.
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the
device for how to enable the
function.
The audio quality is poor after
connection with a Bluetooth
enabled device.
The microphone is not correctly
positioned.
Use optional external microphone
andadjustthepositionofit.
The Bluetooth reception is poor.
Move the device closer to the
car audio system or remove any
obstacle between the device and
the system.
56 NX501E/NZ501E
English
Owner’s Manual
TV/VTR (When connecting an optional TV tuner, etc.)
Problem Cause Measure
The image is not
displayed.
The parking brake is not
engaged.
Check that the parking brake is engaged.
The display is dark.
The brightness control is too
low.
Adjustthebrightnessproperly.
The operating condition is
not good.
The temperature inside the vehicle may be 0 or
lower. Set to an appropriate temperature (25 or so)
and check it again.
The headlight of the vehicle
is lit
The display is made dark at night to prevent the
glare (When the headlight of the vehicle is lit in the
daytime, the display gets dark).
When the camera is
connected, the image is
disturbed.
Improper NTSC/PAL setting
Set the PAL/NTSC properly according to the
camera.
There are red, green, and
blue points in display.
--------------------
This is not a failure, but a phenomenon peculiar
to a liquid crystal panel (The liquid crystal panel is
produced according to technology with very high
precision. Note that, though there are effective
pixels of 99.99% or more, pixel missing or normally
lit pixels account for 0.01%).
24. ERROR DISPLAY
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD PLAYER
Display Cause Measure
Invalid Disc
A disc is caught inside the DVD deck and
isnotejected.
This is a failure of DVD deck’s
mechanism and consult your store
of purchase.
Invalid Disc
A disc cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped disc.
Invalid Disc
A disc is loaded upside- down inside the
DVD deck and does not play.
Ejectthediscthenreloadit
properly.
PARENTAL VIOLATION
Parental level error Set the correct Parental level.
Disc Region incorrect
Region code error
Ejectthedisc,andreplacecorrect
region code disc.
If an error display other than the ones described above appears, press the Reset button. If the problem persists,
turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.
57NX501E/NZ501E
English
English
Owner’s Manual
25. SPECIFICATIONS
FM Tuner
FrequencyRange: 87.5 MHz to 108.0 MHz
UsableSensitivity:8 dBµV
50dBQuietingSensitivity: 14 dBµV
AlternateChannelSelectivity: 70 dB
StereoSeparation:
25 dB (1 kHz)
FrequencyResponse: 30 Hz to 14 kHz
AM Tuner
FrequencyRange: 531 kHz to 1,602 kHz
UsableSensitivity: 30 dBµV
DVD Player System
Digital Versatile Disc System with CDDA capable
Usablediscs:
DVD video disc, Compact disc
FrequencyResponse: 20 Hz to 20 kHz
Sound/NoiseRatio:95 dbA (1 W Ref)
DynamicRange: 95 dB (1 kHz)
Distortion:0.05%
Videosystem:NTSC/PAL
Audio/Video Input
Audioinputvoltage:
2 V
rms
Videoinputvoltage: 1.0 V
p-p
@75
Audioinputsensitivity(at2Voutput)
High: 325 mV
rms
Mid: 650 mV
rms
Low: 1.3 V
rms
Audio/Video output
Videooutputvoltage:1.0 V
p-p
@75
NX501EScreenSize: 6.2” wide type
Pixels: 1,152,000
Resolution: 800 x 480 x 3 (RGB)
NZ501EScreenSize: 7” wide type
Pixels: 1,152,000
Resolution: 800 x 480 x 3 (RGB)
Bluetooth
Specication: Bluetooth Ver 2.1+EDR
Prole:
HFP1.5(Hands Free Profile)
HSP1.0 (Headset Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP1.2,1.3,1.4 (AV Remote Control Profile)
PowerClass: 2
MP3 mode
Bitrate: 32 kbps to 320 kbps
Samplingrate: 32 kHz, 44.1 kHz, 48 kHz
WMA mode
Bitrate:64 kbps to 192 kbps
Samplingrate: 32 kHz, 44.1 kHz, 48 kHz
USB
Specication:USB 1.1/2.0 (FS)
Playableaudioformat:
MP3(.mp3):MPEG2/AudioLayer-3
WMA(.wma):Ver7/8/9.1/9.2
Playable Video Format
DiscVideo:.mp4(MPEG4/AAC)720*480
.avi (MPEG4/MP3) 720*480
.mpg (MPEG2/MP3) 720*480
USBVideo:.mp4(MPEG4/AAC)480*272
.mp4 (H.264/AAC) 480*272
.3gp (MPEG4/AAC) 480*272
.avi (MPEG4/MP3) 480*272
.mpg (MPEG2/MP3) 480*272
General
Powersourcevoltage:
14.4 VDC (10.8 to 15.6 V allowable)
Ground:Negative
Currentconsumption:4.0 A @1 W
AutoAntennaRatedCurrent: 500 mA less
Note:
•SpecicationscomplywithJEITAStandards.
•Specicationsanddesignaresubjecttochange
without notice for further improvement.
58 NX501E/NZ501E
English
Owner’s Manual
NX501Edimensions:
NX501Eweight:2.4kg
NZ501Edimensions:
NZ501Eweight:2.4kg
RemoteControldimensions:
RemoteControlweight:
50g (including battery)
52 mm
mm421
12 mm
178 mm
61 3 mm
41 5 mm
100 mm
178 mm
91 5 mm
61 5 mm
50 mm
59NX501E/NZ501E
English
English
Owner’s Manual
INSTALLATION / WIRE
CONNECTION GUIDE
1. Before Starting
1. This set is exclusively for use in cars with a negative ground
12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “-” terminal before starting.
This is to prevent short circuits during installation. (Figure 1)
2. Package Contents
Main unit ................................................... 1
Wiring harness
.......................................... 1
GPS antenna
............................................ 1
Clamp for GPS antenna's cable
............... 3
Double face tape for GPS Antenna
.......... 1
Remote control unit
.................................. 1
Battery (CR2025)
...................................... 1
(Installed in remote control)
Trim ring
................................................... 1
Cleaning cloth........................................... 1
Warranty Card
.......................................... 1
Owner’s manual and
Installation manual.................................... 2
User manual - Clarion mobile map............2
Electro tap
................................................ 2
2DIN trim ring 200mm wide
(NX501E only)
........................................... 1
Mounting Bracket key
(NZ501E only)
........................................... 2
Flush mount bolts
(NX501E)
................................................... 8
(NZ501E)
................................................... 4
Hexagon Head Screw
(NX501E)
................................................... 8
(NZ501E)
................................................... 5
AV cable
................................................... 1
Line out cable (NX501E only)
................... 1
Line in cable (NX501E only)
...................... 1
Rear Zone out cable (NX501E only)
......... 1
SWI cable (NX501E only)
.......................... 1
DTV cable (NX501E only).......................... 1
External Microphone cable
(NX501E only)
........................................... 1
CONTENTS
1. Before Starting ..............................................................................................59
2. Package Contents .........................................................................................59
3. General Cautions...........................................................................................60
4. Cautions On Installation ................................................................................60
5. Installing The Main Unit .................................................................................61
6. Cautions On Wiring .......................................................................................63
7. Wire Connections ..........................................................................................64
Figure 1
Car battery
60 NX501E/NZ501E
English
Owner’s Manual
3. General Cautions
1. Do not open the case. There are no user- serviceable
parts inside. If you drop anything into the unit during
installation, consult your dealer or an authorized
Clarion service center.
2. Use a soft, dry cloth to clean the case. Never use
a rough cloth, thinner, benzine, or alcohol etc. For
tough dirt, apply a little cold or warm water to a soft
cloth and wipe off the dirt gently.
4. Cautions on Installation
1. Prepare all articles necessary for installing the
source unit before starting.
2. This model features an operation panel that slides
forward.
On some types of cars, the operation panel may
make contact with the dashboard or gearshift
lever, in which cause it cannot be installed. Before
installing, check that the unit will not hamper
operation of the gearshift lever or obstruct your view
before selecting the installation location. (Figure 2)
3.Installtheunitwithin30°ofthehorizontalplane.
(Figure 3)
4. If you have to do any work on the car body, such as
drilling holes, consult your car dealer beforehand.
5. Use the enclosed screws for installation. Using
other screws can cause damage. (Figure 4)
NX501E
NZ501E
Figure 3
NZ501E
Figure 2
Gearshift lever
(Check that it does not
touch the LCD)
Dashboard
Gearshift lever
Figure 4
Chassis Chassis
Damage
Max. 8 mm (M5 screw)
61NX501E/NZ501E
English
English
Owner’s Manual
5. Installing the Main Unit
This unit is designed for fixed installation in the
dashboard.
1. When installing the main unit in NISSAN vehicles,
use the parts attached to the unit and follow the
instructions in Figure 6.
When installing the main unit in TOYOTA vehicles,
use the parts attached to the vehicle and follow the
instructions in Figure 7.
2. Wire as shown in Section 7.
3. Reassemble and secure the unit in the dashboard
and set the face panel and center panel.
Installing the Main Unit in NISSAN Vehicle
Note:
*1:Positionthefacepanelwithitswideedgeatthebottom.Fittheedgeinto
the groove of the main unit.
Figure 6
6-Spacer(thickness:1mm)
6- Flat head screws
(M5x8)
(Attached to the main unit)
Trim ring (*1)
Mounting bracket
(1 pair for the left and right sides)
Main Unit
Figure 5
For NISSAN vehicle
Mounting Screw Holes (Side View of the Main Unit)
For TOYOTA vehicle
62 NX501E/NZ501E
English
Owner’s Manual
Installing the Main Unit in TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.)
*2. Some panel openings are too small for the unit
depending on the vehicle type and model. In such
a case, trim the upper and lower sides of the panel
frame by about 0.5 to 1.5 mm so the unit can be
inserted smoothly.
*3. If a hook on the installation bracket interferes with
the unit, bend and flatten it with a nipper or similar
tool.
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
• Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in
“INSTALLINGTHEMAINUNIT”.
Typical Mounting Brackets
Example 1 Example 2
Affix the screws to the
marks.
Example 3
* 3
8- Hexagonal screws
(M5x8)
Mounting bracket
(1 pair for the left
and right sides)
Center Panel
(*2)
Main Unit
Figure 7
63NX501E/NZ501E
English
English
Owner’s Manual
6. Cautions on Wiring
1. Be sure to turn the power off before wiring.
2. Be particularly careful where you route the wires.
Keepthemwellawayfromtheengine,andexhaustpipe,etc.Heatmay
damage the wires.
3. If the fuse should blow, check to see if the wiring is correct.
If a fuse is blown, replace it with a new one of the same amperage rating as
the original (15A FUSE).
4. To replace the fuse, remove the old fuse on the back of the unit and insert
the new one. (Figure 8)
NOTE:
There are various types of fuse holder. Do not let the battery side touch other metal
parts.
Figure 8
Fuse (15A FUSE)
After the connection, fix the cord by a clamp
or insulation tape for protection.
Fuse holder
CAUTION
64 NX501E/NZ501E
English
Owner’s Manual
Green
White
Red
Video In
Audio/L
Audio/R
Steering Wheel
Remote Control Terminal
Yellow
RearZone
Monitor
Yellow
Yellow
GPS
Antenna
External
Microphone
Connection
Radio Antenna
Gray
Black
Black
Black
Black
Video Out
4-Channel Amplifier
Subwoofer 1
Subwoofer 2
Line Out
Rear R
Line Out
Rear L
Line Out
Front R
Line Out
Front L
Purple
Gray
Black
White
Red
White
Red
White
Red
CAMERA
VISUAL IN
SWI
VIDEO OUT
DTV
2 ZONE OUT
Black
Red
White
Red
EX MIC
DVB-T Tuner (DTX501E)
iPod/iPhone
CCA-748 (sold separately)
Video Out
Rear Vision Camera
SUB WOOFER
AUX IN 2
7. Wire Connections
Note:
•Beforeinstalling,besuretodisconnectthenegativecableofthecarbattery.
•Intheoptionaldevices,theRCAcablesandtheConnectorcablesareseparately-solditems.
Refer to
page 66
NX501E
65NX501E/NZ501E
English
English
Owner’s Manual
Black
Radio Antenna Jack
4-Channel Amplifier
Subwoofer 1
Subwoofer 2
Line Out
Rear R
Line Out
Rear L
Line Out
Front R
Line Out
Video Out
Front L
Video in
Audio/R
Audio/L
Camera
Yellow
White
White
Red
Red
Red
White
Yellow
Purple
Gray
Gray
Red
Black
Black
Black
Black
White
Steering Wheel
Remote Control Terminal
Yellow
Monitor
Yellow
White
Red
Red
Rear zone out R
Rear zone out L
Red
White
Green
GPS
Antenna
External
Microphone
Connection
iPod/iPhone
MIC
SWI
CAMERA
VISUAL OUT
VISUAL IN
DVB-T Tuner (DTX501E)
DTV
CCA-748 (sold separately)
Rear Vision Camera
NZ501E
Refer to
page 66
66 NX501E/NZ501E
English
Owner’s Manual
See next page for how to connect the parking brake cord.
15A
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
Description
No.
A-1
A-2
A-3
A-4
A-5
A-6
A-7
A-8
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
Rear right-
Rear right+
Rear left-
Rear left+
Front left-
Front left+
Front right+
Front right-
GND
Illumination
Auto antenna
+12V accessory
+12V main power
+12V main power (
Yellow)
Auto antenna (Blue)
Phone interrupt (Brown)
Parking (
Grass-green)
Remote (Blue/White)
Reverse (Purple/White)
+12V accessory (Red)
No. Description
3
4
5
6
7
2
1
3
4
5
6
7
2
1
!!!!Warning!!!!
Parking brake safety
device must be connected
for complete operation
Yellow
Red
Yellow
Red
For VW and Audi: Change wiring as above
Note:
*1: Connecting the PHONE INTERRUPT terminal
The phone interrupt will mute the audio if the lead receives a negative or ground signal.
67NX501E/NZ501E
English
English
Owner’s Manual
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
•ConnectingtheparkingbrakecordtolampgroundallowsyoutowatchiPod/iPhonevideo/DVDvideo/AVinputwhen
the parking brake is engaged.
•Whentheparkingbrakecordisnotconnected,themonitorwillnotshowanyvideosources.
•If“AUDIOONLY”appearsonthescreenjustafterturningontheACCpowerofthecar,releasetheparkingbrake
whileconrmingsafety,andthenengagetheparkingbrakeagain.
Connecting the accessories
•Connectingtotheexternalamplier
The external amplifiers can be connected to the 6 channel RCA output connections. Ensure that the connectors
are not grounded or shorted to prevent damage to the unit.
•ConnectingtoiPod/iPhonedevice
The iPod/iPhone device can be connected to dedicated iPod/iPhone connection on the main unit. For detailed
information, refer to the instruction sheet or manual for the iPod/iPhone cable.
Note:
•ThisunitmaynotsupportallfunctionsofalliPod/iPhonedevices.
•TheiPod/iPhoneconnectionwillchargeyouriPod/iPhoneunlesstheiPod/iPhonebatteryiscompletelydepleted.If
thespeciedcordofthecellularphoneisconnectedtothephoneinterruptcordofthemainunit,theaudiomuteis
activated when cellular phone in use.
•ConnectingtoSIRIUSSatelliteRadioReceiver
When SIRIUS Satellite Radio Receiver is to be connected, use the dedicated connector. For detailed
information,refer to the instruction manual of the SIRIUS Satellite Radio Receiver.
Parking brake lamp
cord to battery
Electro-tap
Parking brake
signal cord
Parking brake
signal cord
Stopper
Parking brake
signal cord
Parking brake
Parking brake cord
(Grass-green)
Parking brake cord
(Grass-green)
Howtoattachtheelectro-tap
1. Place the Parking brake cord at the stopper, and
fold it back in the direction of the arrow
2. Pass the Parking brake signal cord through, and
fold it back in the direction of the arrow.
Clarion Co., Ltd.
All Rights Reserved. Copyright
©
2011: Clarion Co., Ltd.
Printed in China / Imprime au Chiné / Impreso en China
2011/05 NX501E/NZ501E
English:
Declaration of conformity
We Clarion declares that this model NX501E/
NZ501E is following the provision of Directive
1999/5/EC with the essential requirements and
the other relevant regulations.
Français:
Déclaration de conformité
Nous, Clarion, déclarons que ce modèle
NX501E/NZ501E est conforme aux exigences
essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Deutsch:
Konformitätserklärung
Wir, Clarion, erklären, dass dieses Modell
NX501E/NZ501E den Bestimmungen der
Richtlinie 1999/5/EG im Hinblick auf die
grundlegenden Anforderungen und andere
relevante Bestimmungen entspricht.
Italiano:
Dichiarazione di conformità
Clarion dichiara che il presente modello NX501E/
NZ501E è conforme ai requisiti essenziali e alle
altre disposizioni pertinenti stabiliti dalla direttiva
1999/5/CE.
Nederlands:
Conformiteitsverklaring
Clarion verklaart dat het model NX501E/NZ501E
in overeenstemming is met de essentiële eisen
en andere relevante voorschriften van de
bepalingen van Richtlijn 1999/5/EC.
Español:
Declaración de conformidad
Clarion declara que este modelo NX501E/
NZ501E cumple con los requisitos esenciales
y otras disposiciones aplicables descritos en la
Directiva 1999/5/CE.
Svenska:
Intyg om överensstämmelse
Härmed intygar Clarion att denna modell
NX501E/NZ501E uppfyller kraven i direktiv
1999/5/EG gällande väsentliga egenskaper och
övriga relevanta bestämmelser.
Polski:
Deklaracja zgodności
Firma Clarion niniejszym oświadcza, że model
NX501E/NZ501E jest zgodny z istotnymi
wymogami oraz inny m i odpowiednimi
postanowieniami Dyrektywy 1999/5/WE.
Ελληνικά:
Δήλωση συμμόρφωσης
Εμείς στην Clarion δηλώνουμε ότι αυτό το
μοντέλο NX501E/NZ501E τηρεί τις διατάξεις της
Οδηγίας 1999/5/ΕΚ σχετικά με τις ουσιώδεις
α πα ι τή σ ε ι ς κ αι τ ο υ ς ά λ λ ο υς σ χ ετ ι κο ύ ς
κανονισμούς.
Italy
Dichiarazione di conformità:
Io mandatario nell' UE: Clarion Europe S.A.S.
Z.I. du Pré à Varois, Route de Pompey, 54670
Custines, Francia Dichiaro che il prodotto
NX501E/NZ501E è conforme al DM 28-08-1995
ottemperando alle prescrizioni dei DM 25-06-
1985 e DM 27-08-1987.
Ministerial authorization FI DM 27-08-1987 of
protocol: 0018816 date 25/02/2011(NX501E)
0026005 date 21/03/2011(NZ501E)
Clarion Europe S.A.S.
Z.I. du Pré à Varois, Route de Pompey, 54670 Custines, FRANCE
NX501E
N
Z
501E
User Manual
Manuel de l’utilisateur
Bedienungsanleitung
Manuale utente
Handleiding
Manual de usuario
Användarhandbok
Podręcznik uęytkownika
Εγχειρίδιο χρήσης
Clarion Mobile Map
Thank you for choosing the Clarion NX501E/NZ501E as your navigator. Start using NX501E/NZ501E right away. This
document is the detailed description of the navigation software. You can easily discover Clarion Mobile Map while
you are using it; however, we still recommend that you read this manual to fully understand the screens and features.
Easy navigation map updates
It is easy to keep the navigation system up to date. Simply download new map data from Clarion’s portal site, store
them on a microSD card and insert it into the Clarion NX501E/NZ501E via the front card slot. Unpleasant surprises
are now avoided as navigation maps will match the real world.
Latest Map Guarantee
When you start using the product, you have 30 days to download the latest available map free of charge.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 3 2011-2-23 11:23:16
1NX501E/NZ501E
English
English
Owner’s Manual
CONTENTS
1 Warnings and Safety information ······························································································3
2 Getting started
····························································································································4
2.1 Buttons and other controls on the screen
···············································································4
2.1.1 Using keyboards
············································································································5
2.1.2 Beyond single screen tap
······························································································6
2.2 Map screen······························································································································6
2.2.1 Navigating on the map
···································································································6
2.2.2 Position markers
············································································································8
2.2.3 Objects on the map
·······································································································8
2.2.5 Quick menu
··················································································································12
2.2.6 Checking the details of the current position (Where Am I?)
········································14
2.3 Navigation menu
···················································································································15
3 Navigating
··································································································································16
3.1 Selecting the destination of a route
······················································································16
3.1.1 Entering an address or a part of the address
······························································16
3.1.2 Selecting the destination from the Places of Interest
··················································22
3.1.3 Selecting a map location as the destination
································································28
3.1.4 Selecting the destination from your Favourites
···························································29
3.1.5 Selecting your Home location
······················································································29
3.1.6 Selecting a recent destination from the History
···························································30
3.1.7 Entering the coordinate of the destination
···································································30
3.1.8 Navigate to a location stored in a photo
······································································31
3.1.9 Building a route from the list of destinations (Create Route)
·······································31
3.2 Viewing the entire route on the map
·····················································································32
3.3 Checking route parameters and accessing route related functions
·····································32
3.4 Modifying the route
···············································································································33
3.4.1 Selecting a new destination when already having a route:
New Route, Waypoint or Final Destination
··································································33
3.4.2 Setting a new starting position for the route
································································33
3.4.3 Editing the list of destinations (Edit Route)
··································································34
3.4.4 Pausing the active route
······························································································34
3.4.5 Cancelling the active route
··························································································34
3.4.6 Checking route alternatives when planning the route
·················································34
3.4.7 Checking route alternatives for an existing route
························································35
3.4.8 Changing the vehicle used in route planning
·······························································35
3.4.9 Changing the road types used in route planning
·························································36
3.5 Saving a location as a Favourite destination
·········································································36
3.6 Saving a location as an alert point
························································································37
3.7 Editing an alert point
·············································································································37
4 Reference Guide
························································································································39
4.1 Concepts
·······························································································································39
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 1 2011-2-23 11:23:16
2 NX501E/NZ501E
English
Owner’s Manual
4.1.1 Smart Zoom ·················································································································39
4.1.2 Daytime and night colour themes
················································································39
4.1.3 Route calculation and recalculation
·············································································39
4.1.4 Green routing
···············································································································40
4.1.5 Road safety cameras and other proximity alert points
················································40
4.1.6 Speed limit warning
·····································································································41
4.1.7 Traffic information in route planning
············································································41
4.2 ‘More’ menu
··························································································································42
4.3 Settings menu
·······················································································································43
4.3.1 Sound and Warnings
···································································································44
4.3.2 Customise Quick menu
································································································45
4.3.3 Traffic settings
··············································································································45
4.3.4 Route settings
··············································································································45
4.3.5 Green routing settings
·································································································47
4.3.6 Map settings
················································································································47
4.3.7 Visual guidance settings
······························································································48
4.3.8 Display settings
············································································································48
4.3.9 Regional settings
·········································································································48
4.3.10 Trip monitor settings
··································································································49
5 Glossary
·····································································································································50
6 End User Licence Agreement
··································································································51
7 Copyright note
····························································································································53
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 2 2011-2-23 11:23:16
3NX501E/NZ501E
English
English
Owner’s Manual
1
Warnings and Safety information
The navigation system helps you find your way to your destination with a connected GPS receiver. Clarion Mobile
Map does not transmit your GPS position; others cannot track you.
It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we
recommend that you operate Clarion Mobile Map before you start your journey. Plan the route before your departure
and stop if you need to change the route.
You must obey the traffic signs and follow the road geometry. If you deviate from the recommended route, Clarion
Mobile Map changes the instructions accordingly.
Never place NX501E/NZ501E where it obstructs the driver’s view, where it is in the deployment zone of an airbag or
where it might cause injuries in an accident.
For more information, consult the End User Licence Agreement (page 51).
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 3 2011-2-23 11:23:17
4 NX501E/NZ501E
English
Owner’s Manual
2
Getting started
Clarion Mobile Map is optimised for in-car use. You can
use it easily by tapping the screen buttons and the map
with your fingertips.
When using the navigation software for the first time, an
initial setup process starts automatically. Do as follows:
1. Select the written language of the application
interface. Later you can change it in Regional settings
(page 48).
2. Read the End User Licence Agreement. Tap
to continue.
3. The Configuration wizard starts. Tap
to continue.
4. Select the language and speaker used for
voice guidance messages. Later you can change it in
Sound and Warnings settings (page 48).
5. If needed, modify the time format and unit
settings. Later you can change them in Regional
settings (page 48).
6. If needed, modify the default route planning
options. Later you can change them in Route settings
(page 45).
7. The initial setup is now complete. The
Configuration wizard can be restarted later from the
Settings menu (page 43).
8. Clarion Mobile Map offers you to watch
the tutorial that leads you through the basic steps of
navigation. Tap
if you would like to
get an instant understanding of the functions of your
software. You can run it later if you choose .
After the initial setup, the Map screen appears and you
can start using Clarion Mobile Map.
2.1 Buttons and other controls on the screen
When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to perform a major
reconfiguration, or you are about to lose some of your data or settings. Otherwise, Clarion Mobile Map saves your
selections and applies the new settings without confirmation as soon as you use the controls.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 4 2011-2-23 11:23:18
5NX501E/NZ501E
English
English
Owner’s Manual
Type Example Description How to use it
Button
Tap it to initiate a function, to open a
new screen, or to set a parameter.
Tap it once.
Button with
value
Some buttons display the current
value of a field or setting. Tap the
button to change the value. After
the change, the new value is shown
on the button.
Tap it once.
Icon
Shows status information.
Some icons also function as a
button. Tap them once.
List
When you need to select from
several options, they appear in a list.
Grab the list anywhere and slide
your finger up or down. Depending
on the speed of the sliding, the list
will scroll fast or slow, only a bit or
till the end.
Alternatively, move between pages
with the
and buttons and
tap the value that you want.
Radio button
When there are only a few choices,
radio buttons may be used instead
of lists. Only one value can be
selected.
Tap one of the buttons to select a
new value.
Switch
When there are only two choices,
a checkmark shows whether the
feature is enabled.
Tap it to turn the switch on or off.
Slider
When a feature can be set to
different values in a range, Clarion
Mobile Map shows an indicator on
a gauge that displays and sets the
value.
• Drag the handle to move
the slider to its new
position.
• Tap the slider where
you want the handle to
appear; the thumb jumps
there.
Virtual
keyboard
Alphabetic and alphanumeric
keyboards to enter text and
numbers.
Each key is a touch screen button.
2.1.1 Using keyboards
You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-
screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical.
Task Instruction
Switching to another keyboard layout, for example from an
English keyboard to a Greek keyboard
Tap the
button and select the new
keyboard layout from the list.
Correcting your entry on the keyboard
Tap to remove the unneeded character(s).
Tap and hold the button to delete several characters
or the entire input string.
Entering a space, for example between a first name and a
family name or in multi-word street names
Tap the
button at the bottom centre of the screen.
Entering numbers and symbols
Tap
to switch to a keyboard offering numeric
and symbol characters.
Finalising the keyboard entry (accepting the suggested
search result)
Tap .
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 5 2011-2-23 11:23:19
6 NX501E/NZ501E
English
Owner’s Manual
Task Instruction
Finalising the keyboard entry (opening the list of search
results)
Tap
.
Finalising the keyboard entry (saving your input)
Tap
.
Cancelling the keyboard entry (returning to the previous
screen)
Tap
.
2.1.2 Beyond single screen tap
You usually need to tap the screen only once. However, some useful features can be accessed with combined touch
screen tapping. Those are the following:
Action Details
Tapping and
holding the screen
Tap and keep pressing the following buttons to reach extra functions:
• Tap and hold on list and menu screens: the Map screen appears.
• Tap and hold any of the , , , , , and buttons on the Map
screen: you can rotate, tilt or scale the map continuously.
• Tap and hold on keyboard screens: you can delete several characters quickly.
• Tap and hold or in long lists: you can scroll pages continuously.
Gestures
(drag&drop)
You need to drag and drop the screen only in cases like:
• Moving the handle on a slider.
• Scrolling the list: grab the list anywhere and slide your finger up or down.
Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or
till the end.
• Moving the map in map browsing mode: grab the map, and move it in the desired
direction.
2.2 Map screen
2.2.1 Navigating on the map
The Map screen is the most frequently used screen of Clarion Mobile Map.
A small live map is displayed on the startup screen, the Navigation menu, as a part of the
button.
To enlarge this small map and open the Map screen, tap .
This map shows the current position (the Vehimarker, a red arrow by default), the recommended route (an orange
line), and the surrounding map area.
When there is no GPS position, the Vehimarker is transparent. It shows your last known position.
You see coloured dots circling around a satellite symbol in the top left corner. The more green dots you see, the
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 6 2011-2-23 11:23:20
closer you are to get the valid GPS position.
When GPS position is available, the Vehimarker is displayed in full colour, now showing your current
position.
There are screen buttons and data fields on the screen to help you navigate. During navigation, the
screen shows route information.
By default, only one data field is displayed in the bottom right corner. Tap this field to see all route
data fields.
Tap any of the data fields to suppress others and display only the selected one. The data fields are
different when you are navigating an active route and when you have no specified destination (the
orange line is not displayed).
Default data fields when cruising without a destination (tap and hold any of the fields to change
its value):
Field Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate time
comes from the GPS satellites, and the time zone information comes from the
map or it can be set manually in Regional settings.
(The current time is always displayed in the top left corner of menu screens.)
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 7 2011-2-23 11:23:21
8 NX501E/NZ501E
English
Owner’s Manual
Default data fields when navigating a route (tap and hold any of the fields to change its value):
Field Description
Shows the distance you need to travel on the route before reaching your final destination.
Shows the time needed to reach the final destination of the route based on information available
for the remaining segments of the route.
If NX501E/NZ501E is capable of receiving live traffic information, the calculation takes into
account traffic delays affecting your route if they are received. However, this calculation is
rarely accurate.
Shows the estimated arrival time at the final destination of the route based on information
available for the remaining segments of the route.
If NX501E/NZ501E is capable of receiving live traffic information, the calculation takes into
account traffic delays affecting your route if they are received. However, this calculation is
rarely accurate.
2.2.2 Position markers
2.2.2.1 Vehimarker and Lock-on-Road
When your GPS position is available, Clarion Mobile Map marks your current position with the Vehimarker. By
default, this marker is a red arrow, but you can change this icon in Settings.
The Vehimarker may not show your exact GPS position and heading. If roads are near, it is aligned to the nearest
road to suppress GPS position errors, and the direction of the icon is aligned to the direction of the road.
2.2.2.2 Selected map location (Cursor) and selected map object
You can mark a map location in the following ways:
•Tap the map when navigating,
•Tap the map when you are asked to confirm the destination at the end of a search, or
•Tap the map in Find on Map (page 28)
When a map location is selected, the Cursor appears at the selected point on the map. The Cursor is displayed with
a radiating red dot (
) to make it visible at all zoom levels.
The location of the Cursor can be used as the destination of the route, a new alert point, you can search for Places
around it, or you can save this location as one of your Favourite destinations.
You can also select some of the objects on the map. If you tap the map at the icon of a Place of Interest or an alert
point, the object will be selected (you see a red circling border around the object), and you can get information about
this object or use it as a route point.
2.2.3 Objects on the map
2.2.3.1 Streets and roads
Clarion Mobile Map shows the streets in a way that is similar to how the paper road maps show them. Their width
and colours correspond to their importance: you can easily tell a motorway from a small street.
2.2.3.2 Turn preview and Next street
When navigating a route, the top section of the Map screen shows information about the next route event
(manoeuvre) and the next street or the next city/town.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 8 2011-2-23 11:23:22
9NX501E/NZ501E
English
English
Owner’s Manual
There is a field in the top left corner that displays the
next manoeuvre. Both the type of the event (turn,
roundabout, exiting motorway, etc.) and its distance
from the current position are displayed.
A smaller icon shows the type of the second next
manoeuvre if it is near the first one. Otherwise, only the
next manoeuvre is displayed.
Most of these icons are very intuitive. The following
table lists some of the frequently shown route events.
The same symbols are used in both fields:
Icon Description
Turn left.
Turn right.
Turn back.
Bear right.
Turn sharp left.
Keep left.
Continue straight in the intersection.
Go left on the roundabout, 3rd exit (next
manoeuvre).
Enter roundabout (second next
manoeuvre).
Enter motorway.
Exit motorway.
Board ferry.
Icon Description
Leave ferry.
Approaching a waypoint.
Approaching the destination.
2.2.3.3 Lane information and Signposts
When navigating on multilane roads, it is important
to take the appropriate lane in order to follow the
recommended route. If lane information is available in
the map data, Clarion Mobile Map displays the lanes
and their directions using small arrows at the bottom
of the map. Highlighted arrows represent the lanes you
need to take.
Where additional information is available, signposts
substitute arrows. Signposts are displayed at the top
of the map. The colour and style of the signposts are
similar to the real ones you can see above road or by
the roadside. They show the available destinations and
the number of the road the lane leads to.
All signposts look similar when cruising (when there is
no recommended route). When navigating a route, only
the signpost that points to the lane(s) to be taken is
displayed in vivid colours; all others are darker.
If you want to hide the currently displayed signposts,
tap any of them and the normal Map screen returns until
new signpost information is received.
2.2.3.4 Junction view
If you are approaching a motorway exit or a complex
intersection and the needed information exists, the map
is replaced with a 3D view of the junction. The lanes you
need to take are displayed with arrows. Signposts can
also be present if information is available.
If you want to hide the currently displayed junction, tap
the picture and the Map screen returns.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 9 2011-2-23 11:23:23
10 NX501E/NZ501E
English
Owner’s Manual
2.2.3.5 3D object types
Clarion Mobile Map supports the following 3D object types:
Type Description
3D terrain
3D terrain map data shows changes in terrain, elevations or depressions in the land when
you view the map in 2D, and use it to plot the route map in 3D when you navigate. Hills
and mountains are shown in the background of the 3D map, and illustrated by colour and
shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as overpasses or bridges) are
displayed in 3D.
3D landmarks Landmarks are 3D artistic or block representations of prominent or well-known objects.
3D buildings
3D block representation of full city building data containing actual building size and position
on the map.
2.2.3.6 Elements of the active route
Clarion Mobile Map shows the route in the following way:
Symbol Name Description
Current GPS position and
Start point
Your current position displayed on the map. If roads are near, it is aligned
to the nearest road.
Normally if GPS position is available, the route starts from the current
position. If there is no valid GPS position, Clarion Mobile Map uses the
last known position as the start point.
Waypoint (intermediate
destination)
An intermediate destination of the route before reaching the final
destination.
Destination (end point) The final destination of the route.
Route colour
The route always stands out with its colour on the map, both in daytime
and in night colour mode.
Streets and roads that
are excluded from the
navigation
You can choose whether you want to use or avoid certain road types
(page 45). However, when Clarion Mobile Map cannot avoid such
roads, the route will include them and it will show them in a colour that
is different from the route colour.
Streets and roads that are
affected by traffic events
Road segments may be affected by traffic events received. These
streets and roads are displayed in an alternate colour, and small
symbols displayed along the route show the type of the traffic event.
2.2.3.7 Traffic events
Road segments affected by traffic events are displayed with an alternate colour on the map, and small symbols
above the road show the nature of the event:
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 10 2011-2-23 11:23:24
11NX501E/NZ501E
English
English
Owner’s Manual
Tap to open the Traffic Summary screen.
Tap to open the list of traffic events:
Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map:
Note!
If there are traffic events on the recommended route that the application has not bypassed, the
icon will open the list of significant traffic events to let you quickly check them.
2.2.4 Manipulating the map
Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker,
a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help
you modify the map view.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 11 2011-2-23 11:23:25
12 NX501E/NZ501E
English
Owner’s Manual
Action Button(s) Description
Moving the map with
drag&drop
No buttons
You can move the map in any direction: tap and hold the map, and
move your finger towards the direction you want to move the map.
Zooming in and out
,
Changes how much of the map is displayed on the screen.
Clarion Mobile Map uses high-quality vector maps that let you
examine the map at various zoom levels, always with optimised
content. It always displays street names and other text with the
same font size, never upside-down, and you only see the streets and
objects that you need.
Map scaling has a limit in 3D map view mode. If you zoom out further,
the map switches to 2D view mode.
Tap the button once to modify the view in large steps, or tap and hold
the button to modify it continuously and smoothly.
Tilting up and down
,
Changes the vertical view angle of the map in 3D mode.
Tap the button once to modify the view in large steps, or tap and hold
the button to modify it continuously and smoothly.
Rotating left and right
,
Changes the horizontal view angle of the map.
Tap the button once to modify the view in large steps, or tap and hold
the button to modify it continuously and smoothly.
2D or 3D view
,
Tap this button to switch between the 3D perspective and 2D top-
down map view modes.
Compass in 2D map
view mode
,
The direction of the compass shows North. Tap the button to switch
to North-up view, and then tap again to rotate the map in the previous
direction.
Compass in 3D map
view mode
,
The direction of the compass shows North. Tap the button to switch
to North-up view, and then tap again to rotate the map in the previous
direction.
Location information
Tap this button to open a new screen with information about the
selected map point, the Cursor.
Return to normal
navigation
Tap this button to move the map back to follow the current GPS
position. Automatic map rotation is also re-enabled.
The map manipulation buttons disappear and navigation continues.
Additional options
Tap this button to open a list of additional features like saving the
Cursor as a Favourite destination, or searching for Places around the
Cursor.
Select destination
Tap this button to select the Cursor as a new destination. The route is
automatically calculated.
2.2.5 Quick menu
The Quick menu is a selection of controls and functions that are frequently needed during navigation. It can be
opened directly from the Map screen by tapping
.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 12 2011-2-23 11:23:26
13NX501E/NZ501E
English
English
Owner’s Manual
The menu will close after a few seconds of inactivity or if you tap .
Most of these functions are shortcuts. They are accessible from the menu system.
There are more functions available than the number of buttons in the menu. In Settings, you can choose the function
of each button (page 45). The following options are available:
Button Description Shortcut for
This function lets you search for a Place along your
route or around your current location if there is no route
calculated.
Find / Find Places / Quick Search (page 28)
This button opens the list of your Favourite destinations. Find / Favourite (page 29)
This button opens the History list. You can select one of
your previous destinations.
Find / History (page 30)
This button opens the route editing function. My Route / Edit Route
This button opens the route related settings. More / Settings / Route Settings (page 45)
This button opens the map related settings. More / Settings / Map Settings (page 44)
This button opens a special screen with information about
the current position and a button to search for nearby
emergency or roadside assistance. For details, see the
next chapter.
Tap the Current Street field on the Map
screen
This button cancels the route and stops navigation. The
button is replaced with the next one if waypoints are
given.
My Route / Cancel Route (page 34)
This button skips the next waypoint from the route.
This button opens a 2D map scaled and positioned to
show the entire route.
My Route / Overview (page 32)
This button opens the Visual Guidance settings screen. More / Settings / Visual Guidance (page 48)
This button opens the Traffic Summary screen.
Tap the Traffic icon in the Navigation menu
or on the Map screen
This button lets you bypass parts of the recommended
route.
My Route / Avoidances
This button opens the Trip Monitor screen where you can
manage your previously saved trip logs and track logs.
More / Trip Monitor (page 42)
This button opens the list of manoeuvres (the itinerary).
Tap the top of the Map screen during
navigation.
With this function you can save the active route for later
use.
My Route / More / Save Route
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 13 2011-2-23 11:23:27
14 NX501E/NZ501E
English
Owner’s Manual
Button Description Shortcut for
With this function you can replace the active route with a
previously saved route.
My Route / More / Load Route
With this function you can search for Places of Interest in
various different ways.
Find / Find Places (page 25)
This button opens the Map screen and starts simulating
the active route.
My Route / More / Simulate Navigation
(page 38)
This button opens the GPS Information screen with
satellite position and signal strength information.
Tap the top of the Map screen when there
is no GPS reception
This button offers your Home location as a destination.
2.2.6 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about the last known position if GPS reception is not
available) and a button to search for useful Places nearby.
You can access this screen from the map in one of the following ways:
•If the current street is displayed below the Vehimarker (the current position on the map), tap it to open the
Where Am I? screen.
•Open the Quick menu and tap the button.
Information on this screen:
• , : Latitude and Longitude (coordinate of the current position in WGS84 format).
• : Altitude (elevation information coming from the GPS receiver - often inaccurate).
• : House number on the left.
• : House number on the right.
•In the middle of the screen you can see whether the position is current, or the time left since it was last updated.
•Address details (when available) of the current position are also displayed at the bottom.
You can also perform some actions on this screen:
Tap
to save the current position as a Favourite destination.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 14 2011-2-23 11:23:28
15NX501E/NZ501E
English
English
Owner’s Manual
You can also search for assistance near your current position. Tap to open a new screen for the
Quick search:
The following services can be searched around the current position or the last known position:
• : Car repair and roadside assistance services
• : Medical and emergency services
• : Police stations
• : Petrol stations
Tap any of the buttons, select a Place from the list, and navigate to it.
2.3 Navigation menu
You can reach all parts of Clarion Mobile Map from the Navigation menu.
You have the following options:
•Tap to select your destination by entering an address or selecting a place of interest, a location
on the map or one of your Favourite destinations. You can also look up your recent destinations from the Smart
History or enter a coordinate.
•Tap to display the route parameters and the route in its full length on the map. You can also
perform route-related actions such as editing or cancelling your route, setting a start point for the route, picking
route alternatives, avoiding parts of the route, simulating navigation or adding the destination to your Favourites.
•Tap to customise the way the navigation software works, watch the Tutorial, simulate demo
routes, or to run some additional applications.
•Tap to start navigating on the map. The button itself is a miniature live map that shows your
current position, the recommended route and the surrounding map area. Tap the button to enlarge the map to
the full screen.
•Tap to open the Traffic Summary screen.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 15 2011-2-23 11:23:29
16 NX501E/NZ501E
English
Owner’s Manual
3
Navigating
You can set up your route in different ways:
•If you need a route for immediate navigation, you can select the destination and start navigating to it right away
(normal navigation).
•You can also plan a route independently of your current GPS position or even without GPS reception (to achieve
this, you need to turn off the GPS receiver and set a new starting point in My Route / Edit Route by tapping the
flag icon at the current position).
You can plan routes with multiple destinations. Select the first destination. Then select a second destination and add
it to your route to create a multi-point route. You can add as many destinations to your route as you like.
3.1 Selecting the destination of a route
Clarion Mobile Map offers you several ways of choosing your destination:
•Enter a full address or a part of an address, for example a street name without a house number or the names
of two intersecting streets (page 16).
•Enter an address with postal code (page 18). This way you do not need to select the name of the city/town and
the search for street names might be faster as well.
•Use a built-in Place of Interest as your destination (page 22).
•Select a location on the map with the Find on Map feature (page 23).
•Use a previously saved Favourite destination (page 24).
•Select a location from the History of previously used destinations (page 30).
•Enter the coordinate of the destination (page 30).
•Use the location where a photo was taken (page 31).
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
•the exact address, including house number
•the centre of a city/town
•an intersection
•the midpoint of a street
•any of the above, starting the search with the postal code (page 18)
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap to return to the Navigation menu.
2. In the Navigation menu, tap the following buttons: , .
3. By default, Clarion Mobile Map proposes the country and city/town where you are. If needed, tap
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 16 2011-2-23 11:23:29
17NX501E/NZ501E
English
English
Owner’s Manual
, enter the first few letters of the country
name on the keyboard, and select one country from the
list of results.
4. If needed, select a new city/town:
a. Tap .
b. Start entering the name of the city/
town on the keyboard.
c. Find the city/town you need:
•The most likely city/town name is always shown in
the input field. To accept it, tap
.
•If the desired name does not show up, the names
that match the string appear in a list after entering
a couple of characters (to open the list of results
before it appears automatically, tap
). Select the city/town from the list.
5. Enter the street name:
a. Tap .
b. Start entering the street name on the
keyboard.
c. Find the street you need:
•The most likely street name is always shown in the
input field. To accept it, tap
.
•If the desired name does not show up, the names
that match the string appear in a list after entering
a couple of characters (to open the list of results
before it appears automatically, tap
). Select the street from the list.
6. Enter the house number:
a. Tap .
b. Enter the house number on the
keyboard. (To enter letters, tap
).
c. Tap to finish entering
the address. (If the entered house number cannot be
found, the midpoint of the street is selected as the
destination.)
7. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
8. After a short summary of the route parameters,
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 17 2011-2-23 11:23:31
18 NX501E/NZ501E
English
Owner’s Manual
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
Tip!
If you know that you will use this
destination frequently, before tapping
to confirm the destination,
put it on the list of your Favourites first:
tap
then ,
give a name for the new Favourite, and
tap
to save the location.
The map with the destination returns
automatically. Now you can start your
journey.
3.1.1.2 Entering the midpoint of a street as the
destination
You can navigate to the midpoint of a street if the house
number is not available:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. If necessary, modify the country and city/town
as described earlier (page 16).
4. Enter the street name:
a. Tap .
b. Start entering the street name on the
keyboard.
c. Find the street you need:
•The most likely street name is always shown in the
input field. To accept it, tap
.
•If the desired name does not show up, the names
that match the string appear in a list after entering
a couple of characters (to open the list of results
before it appears automatically, tap
). Select the street from the list.
5. Instead of entering the house number, tap
. The midpoint of the street is selected
as the destination.
6. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
7. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 18 2011-2-23 11:23:33
19NX501E/NZ501E
English
English
Owner’s Manual
3.1.1.3 Selecting an intersection as the destination
To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. If necessary, modify the country and city/town
as described earlier (page 16).
4. Enter the street name:
a. Tap .
b. Start entering the street name on the
keyboard.
c. Find the street you need:
•The most likely street name is always shown in the
input field. To accept it, tap
.
•If the desired name does not show up, the names
that match the string appear in a list after entering
a couple of characters (to open the list of results
before it appears automatically, tap
). Select the street from the list.
5. Enter the intersecting street name:
1. Tap .
•If only a few intersecting streets exist, their list
appears immediately.
•In case of a longer street, the keyboard screen
appears. Start entering the name of the intersecting
street on the keyboard. As soon as the street
names that match the entered string can be shown
on one screen, their list appears automatically.
Select from the list.
6. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
7. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 19 2011-2-23 11:23:36
20 NX501E/NZ501E
English
Owner’s Manual
3.1.1.4 Selecting a city/town centre as the
destination
The city/town centre is not the geometric centre of the
city/town but an arbitrary point the map creators have
chosen. In towns and villages, it is usually the most
important intersection; in larger cities, it is one of the
important intersections.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. If necessary, modify the country as described
earlier (page 16).
4. Select the destination city/town:
a. Tap .
b. Start entering the name of the city/
town on the keyboard.
c. Find the city/town you need:
•The most likely city/town name is always shown in
the input field. To accept it, tap
.
•If the desired name does not show up, the names
that match the string appear in a list after entering
a couple of characters (to open the list of results
before it appears automatically, tap
). Select the city/town from the list.
5. Instead of entering the street name, tap
. This way the centre of the displayed
city/town becomes the destination of the route.
6. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
7. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.1.5 Entering an address with a postal code
All of the above address searching possibilities can
be performed with entering the postal code instead of
the city/town name. Find below an example with a full
address:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. If necessary, modify the country as described
earlier (page 16).
4. Enter a new city/town using its postal code:
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 20 2011-2-23 11:23:38
21NX501E/NZ501E
English
English
Owner’s Manual
a. Tap .
b. Tap to open the numeric
keypad.
c. Start entering the postal code.
d. Find the city/town you need:
•The most likely postal code is always shown in the
input field. To accept it, tap
.
•If the desired number does not show up, open the
list of results by tapping
. Select the
postal code from the list.
5. Enter the street name:
a. Tap .
b. Start entering the street name on the
keyboard.
c. Find the street you need:
•The most likely street name is always shown in the
input field. To accept it, tap
.
•If the desired name does not show up, the names
that match the string appear in a list after entering
a couple of characters (to open the list of results
before it appears automatically, tap
). Select the street from the list.
6. Enter the house number:
a. Tap .
b. Enter the house number on the
keyboard. (To enter letters, tap
).
c. Tap to finish entering
the address. (If the entered house number cannot be
found, the midpoint of the street is selected as the
destination.)
7. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
8. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 21 2011-2-23 11:23:41
22 NX501E/NZ501E
English
Owner’s Manual
3.1.1.6 Tips on entering addresses quickly
•When you are entering the name of a city/town or
a street:
•Only those letters are offered on the keyboard
that appear in possible search results. All other
characters are greyed out.
•As you are typing, the most likely result is always
displayed in the input field. If the guess is correct,
tap
to select it.
• After entering a couple of letters, tap
to list the items that contain the specified letters.
•You can speed up finding an intersection:
•Search first for the street with a less common or
less usual name; fewer letters are enough to find it.
•If one of the streets is shorter, search for that one
first. You can then find the second one faster.
•You can search for both the type and the name
of a road. If the same word appears in several
names, for example in the name of streets, roads
and avenues, you can obtain the result faster if you
enter the first letter of the street type: For example,
enter ‚PI A’ to obtain Pine Avenue and skip all Pine
Streets and Pickwick Roads.
•You can also search in postal codes. As postal
codes consist of only a few characters, this is
usually faster than entering the name of the city/
town.
3.1.2 Selecting the destination from the
Places of Interest
You can select your destination from the Places of
Interest included with Clarion Mobile Map.
Using the same screen, you can find a Place in different
ways:
•with the Quick search feature, you can quickly find
a nearby Place by its name
•with the Preset search feature, you can find
frequently searched types of Places with only a few
screen taps
•you can search for a Place by its category
•you can search for a Place by its name
In addition, you can search for special services from the
‚Where Am I?’ screen.
3.1.2.1 Quick search for a Place of Interest
The Quick search feature lets you quickly find a Place
by its name. The search is always carried out
•along the recommended route if it exists or
•around your current location if there is no
destination given.
1. Start the Quick search function:
•If you are on the Map screen, tap and then
tap
.
•If you are in the Navigation menu, tap
, and then tap .
2. Using the keyboard, start entering the name
of the Place.
3. After entering a few letters, tap
to open the list of Places with names containing the
entered character sequence.
4. (optional) The Places in the list are ordered
by the length of the necessary detour (when navigating
a route) or by their distance from the current position
(when no destination is given). If you need to reorder the
list, tap
.
5. Browse the list if necessary and tap one of the
list items. A full screen map appears with the selected
point in the middle. The name and address of the Place
is displayed at the top of the screen.
6. (optional) Tap to see the details of the
selected Place. Tap
to return to the map.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 22 2011-2-23 11:23:42
23NX501E/NZ501E
English
English
Owner’s Manual
7. If necessary, tap the map somewhere else
to modify the destination. The Cursor (
) appears
at the new location. Tap
to confirm the
destination, or tap to select a different
destination.
8. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.2.2 Searching for a Place of Interest using preset
categories
The Preset search feature lets you quickly find the most
frequently selected types of Places.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. The preset search categories appear:
• :
•If an active route exists, petrol stations are searched
along the route.
•If there is no active route (destination is not
selected), they are searched around the current
position.
•If the current position is not available either (no
GPS signal), they are searched around the last
known positi
:
•If an active route exists, parking lots are searched
around the destination of the route.
•If there is no active route (destination is not
selected), they are searched around the current
position.
•If the current position is not available either (no
GPS signal), they are searched around the last
known position.
• :
•If an active route exists, restaurants are searched
along the route.
•If there is no active route (destination is not
selected), they are searched around the current
position.
•If the current position is not available either (no
GPS signal), they are searched around the last
known position.
• :
•If an active route exists, accommodation is
searched around the destination of the route.
•If there is no active route (destination is not
selected), they are searched around the current
position.
•If the current position is not available either (no
GPS signal), they are searched around the last
known position.
4. Tap any of the quick search buttons to get an
instant list of Places.
5. (optional) The Places in the list are ordered by
their distance from the current or last known position,
from the destination or by the length of the necessary
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 23 2011-2-23 11:23:44
24 NX501E/NZ501E
English
Owner’s Manual
detour. If you need to reorder the list, tap
.
6. Browse the list if necessary and tap one of the
list items. A full screen map appears with the selected
point in the middle. The name and address of the Place
is displayed at the top of the screen.
7. (optional) Tap to see the details of the
selected Place. Tap
to return to the map.
8. If necessary, tap the map somewhere else
to modify the destination. The Cursor (
) appears
at the new location. Tap
to confirm the
destination, or tap to select a different
destination.
9. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.2.3 Searching for a Place of Interest by category
You can search for Places of Interest by their categories
and subcategories.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Tap .
4. Select the area around which the Place should
be searched for:
•Tap to search around the current
position or if it is not available, around the last
know position. (The result list will be ordered by the
distance from this position.)
•Tap to search for a place within a
selected city/town. (The result list will be ordered
by the distance from the centre of the selected city/
town.)
•Tap to search for a place around the
destination of the active route. (The result list will
be ordered by the distance from the destination.)
•Tap to search along the active
route, and not around a given point. This is useful
when you search for a later stopover that results
in a minimal detour only, such as searching for
upcoming petrol stations or restaurants. (The result
list will be ordered by the length of the necessary
detour.)
5. (optional) If you have selected ,
select the city/town to search in.
6. Select one of the main Place categories (e.g.
Accommodation) or tap
to list all Places
around the selected location or along the route.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 24 2011-2-23 11:23:45
25NX501E/NZ501E
English
English
Owner’s Manual
7. Select one of the Place subcategories (e.g.
Hotel or Motel) or tap
to list all Places
in the selected main category around the selected
location or along the route.
8. Sometimes the list of brands in the selected
Place subcategory appears. Select one brand or
tap
to list all Places in the selected
subcategory around the selected location or along the
route.
9. Finally, the results appear in a list.
10. (optional) The Places in the list are ordered by
their distance from the current or last known position,
from the selected city/town, from the destination or
by the length of the necessary detour. If you need to
reorder the list, tap
.
11. Browse the list if necessary and tap one of the
list items. A full screen map appears with the selected
point in the middle. The name and address of the Place
is displayed at the top of the screen.
12. (optional) Tap to see the details of the
selected Place. Tap
to return to the map.
13. If necessary, tap the map somewhere else
to modify the destination. The Cursor (
) appears
at the new location. Tap
to confirm the
destination, or tap to select a different
destination.
14. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.2.4 Searching for a Place of Interest by name
You can search for Places of Interest by their names.
You can search around different locations or along
your route in the whole Place database or in one Place
category or subcategory only.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Tap .
4. Select the area around which the Place should
be searched for:
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 25 2011-2-23 11:23:48
26 NX501E/NZ501E
English
Owner’s Manual
•Tap to search around the current
position or if it is not available, around the last
know position. (The result list will be ordered by the
distance from this position.)
•Tap to search for a place within a
selected city/town. (The result list will be ordered
by the distance from the centre of the selected city/
town.)
•Tap to search for a place around the
destination of the active route. (The result list will
be ordered by the distance from the destination.)
•Tap to search along the active
route, and not around a given point. This is useful
when you search for a later stopover that results
in a minimal detour only, such as searching for
upcoming petrol stations or restaurants. (The result
list will be ordered by the length of the necessary
detour.)
5. (optional) If you have selected ,
select the city/town to search in.
6. Select one of the main Place categories (e.g.
Accommodation) to search in or tap
to
search among all Places.
7. Select one of the Place subcategories (e.g.
Hotel or Motel) to search in or tap
to
search in the selected Place category.
8. Tap if you have not done it
before.
9. Using the keyboard, start entering the name
of the Place.
10. After entering a few letters, tap
to open the list of Places with names containing the
entered character sequence.
11. (optional) The Places in the list are ordered by
their distance from the current or last known position,
from the selected city/town, from the destination or
by the length of the necessary detour. If you need to
reorder the list, tap
.
12. Browse the list if necessary and tap one of the
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 26 2011-2-23 11:23:50
27NX501E/NZ501E
English
English
Owner’s Manual
list items. A full screen map appears with the selected
point in the middle. The name and address of the Place
is displayed at the top of the screen.
13. (optional) Tap to see the details of the
selected Place. Tap
to return to the map.
14. If necessary, tap the map somewhere else
to modify the destination. The Cursor (
) appears
at the new location. Tap
to confirm the
destination, or tap to select a different
destination.
15. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.2.5 Searching for a Place of Interest by its phone
number
You can search for Places of Interest by their phone
number:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. The numeric keyboard appears. Enter the
phone number you are looking for or a part of it.
4. Tap .
5. The list of Places with the entered sequence in
their phone number appears.
6. (optional) The Places in the list are ordered by
their distance from the current or last known position,
from the selected city/town, from the destination or
by the length of the necessary detour. If you need to
reorder the list, tap
.
7. Browse the list if necessary and tap one of the
list items. A full screen map appears with the selected
point in the middle. The name and address of the Place
is displayed at the top of the screen.
8. (optional) Tap to see the details of the
selected Place. Tap
to return to the map.
9. If necessary, tap the map somewhere else
to modify the destination. The Cursor (
) appears
at the new location. Tap
to confirm the
destination, or tap to select a different
destination.
10. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.2.6 Selecting nearby assistance from ‚Where Am
I?’
You can quickly search for nearby assistance from the
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 27 2011-2-23 11:23:53
28 NX501E/NZ501E
English
Owner’s Manual
‚Where Am I?’ screen.
1. On the Map screen, tap to open the
Quick menu.
2. Tap , and then .
3. Preset search categories appear, all for
searching around the current position (or around the last
known position if the current position is not available):
• : Car repair and roadside assistance
services
• : Medical and emergency services
• : Police stations
• : Petrol stations
4. Tap any of the quick search buttons to get an
instant list of that type of Places.
5. (optional) The Places in the list are ordered by
their distance from the current or last known position,
from the selected city/town, from the destination or
by the length of the necessary detour. If you need to
reorder the list, tap
.
6. Browse the list if necessary and tap one of the
list items. A full screen map appears with the selected
point in the middle. The name and address of the Place
is displayed at the top of the screen.
7. (optional) Tap to see the details of the
selected Place. Tap
to return to the map.
8. If necessary, tap the map somewhere else
to modify the destination. The Cursor (
) appears
at the new location. Tap
to confirm the
destination, or tap to select a different
destination.
9. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.3 Selecting a map location as the
destination
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. Locate your destination on the map: move
and scale the map as needed.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 28 2011-2-23 11:23:55
29NX501E/NZ501E
English
English
Owner’s Manual
4. Tap the location that you want to select as
your destination. The Cursor (
) appears.
5. Tap to select the Cursor as the
destination.
6. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.4 Selecting the destination from your
Favourites
You can select a location that you have already saved
as a Favourite to be your destination. Adding a location
to the list of Favourite destinations is described on page
36.
1. Access the list of Favourites:
• If you are on the Map screen, tap
and then tap .
• If you are in the Navigation menu,
tap
and then tap .
2. The list of Favourite destinations is displayed.
3. Tap the Favourite that you want to set as your
destination. If necessary, browse down to see more of
the list or tap
and enter a few letters from
the name of the Favourite destination.
4. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
5. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.5 Selecting your Home location
To navigate to your Home location, first you need to
save it. Seach for your address or browse the map
and when the Cursor is at the desired location, tap
and select .
Now that the Home location is set, you can quickly
navigate to it:
1. To select the Home location, do one of the
following:
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 29 2011-2-23 11:23:57
30 NX501E/NZ501E
English
Owner’s Manual
•If you are on the Map screen, tap and then tap
(this button can be added to the Quick menu
in Settins - page 45.
•If you are in the Navigation menu, tap
and then tap .
2. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
3. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.6 Selecting a recent destination from the
History
The destinations that you have set earlier appear in the
History.
1. Access the History:
•If you are on the Map screen, tap and then
tap
.
•If you are in the Navigation menu, tap
and then tap .
2. The list of recent destinations appears. Smart
History promotes three destinations to the first page
based on your previous routes (most likely destinations).
The rest of the destinations are ordered by time they
were last selected. If necessary, scroll the list to see
earlier destinations.
3. Select a destination from the list.
4. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
5. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1 .7 Ent eri ng th e coordi nat e of the
destination
You can also select a destination by entering its
coordinate. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Tap .
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 30 2011-2-23 11:24:00
31NX501E/NZ501E
English
English
Owner’s Manual
4. You can enter the latitude and longitude
values in any of the following formats: decimal degrees;
degrees and decimal minutes; or degrees, minutes and
decimal seconds.
5. (optional) If necessary, tap then
and enter the coordinate in UTM format.
6. When finished, tap .
7. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
8. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
3.1.8 Navigate to a location stored in a photo
You can also set the location stored in a photo as your
destination. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Open the menu and tap
.
4. The list of photos stored in the device appears.
Select one photo from the list.
5. A full screen map appears with the selected
point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap to
confirm the destination, or tap to select
a different destination.
6. After a short summary of the route parameters,
the map appears showing the entire route. The route is
automatically calculated. Tap
to modify
route parameters, or tap and start your
journey.
Note!
Only geotagged JPG files contain location
information. That is why these kind of files
can only be used in navigation. Other
picture files do not appear in the list.
Files must be located on an inserted SD
card or USB pendrive, either in the root
folder or in a "pictures" folder.
3.1.9 Building a route from the list of
destinations (Create Route)
You can also build your route destination by destination
from the My Route menu.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Tap .
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 31 2011-2-23 11:24:02
32 NX501E/NZ501E
English
Owner’s Manual
4. There is only one line in the list of route points,
the start point of the route, normally the current GPS
position.
5. Tap to select the destination.
6. The Destination menu appears and you can
select the destination of the route the same way as
described in the previous sections.
7. When the new destination is selected, the list
returns.
8. To add more destinations, tap where you
want to insert the new route point in the list, and repeat
the above procedure.
3.2 Viewing the entire route on the map
It is easy to get a map overview of the active route. Do
as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Tap . The active route is
displayed in its full length on the map together with
additional information and controls.
3.3 Checking route parameters and
accessing route related functions
You can check different parameters of the route
recommended by Clarion Mobile Map.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. The following pieces of information are
displayed:
•The name and/or address of the destination.
•Warning icons (if any). They provide extra
information about your route (e.g. unpaved roads
or toll roads to be taken).
•The total time of the route.
•The total length of the route.
•Estimated delay calculated from traffic events on
your route.
•The symbol of the vehicle type used in route
calculation.
•The route planning method (e.g. Fast).
4. You have the following options on this screen
(for detailed instructions on how to use them, see the
next chapter):
•Tap to edit the route: to add or
remove destinations or change their sequence.
You can also set a route start point other than your
current location. This can be useful to plan and
save a future trip.
•Tap to display the entire route on
the map.
•Tap to bypass a part of the route.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 32 2011-2-23 11:24:03
33NX501E/NZ501E
English
English
Owner’s Manual
•Tap to delete the active route.
•Tap to open a list with more options
like selecting from route alternatives, changing
route parameters, simulating the route, saving the
active route or loading a previously saved route.
•Tap to return to the Navigation
menu.
3.4 Modifying the route
When navigation is already started, there are several
ways to modify the active route. The following sections
show some of those options.
3.4.1 Selecting a new destination when
already having a route: New Route, Waypoint
or Final Destination
If you already have a recommended route and you select
a new destination as described in the above sections,
the application will ask you whether to start a new route,
add a new waypoint (intermediate destination) to the
route or append the newly selected destination at the
end of the current route.
•Tap to plan a new route to the newly selected
location. The previous destination and waypoint(s)
are deleted.
•Tap to add the newly selected location as
an intermediate destination to your route. The other
destinations of the route remain intact. Note: the
new waypoint is placed among destinations to
keep the route optimal. To decide where a waypoint
to appear, use the Edit Route feature.
•Tap to append the newly selected destination
at the end of the route. The other destinations of the
route remain intact. The previous final destination is
now the last waypoint.
3.4.2 Setting a new starting position for the
route
For normal navigation, all routes are planned from
the current position. In order to check future routes,
simulate them or see their length in time and distance,
you can turn off the GPS receiver. Then you can set the
starting point of the route to a different location than the
current GPS position.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. If you already have a route, tap .
If you are starting a new route, tap
.
4. The first line is the start of the route, normally
the current GPS position. Tap
and confirm your
action at the warning message.
5. The Destination menu appears and you can
select the start point of the route the same way you
select a destination.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 33 2011-2-23 11:24:05
34 NX501E/NZ501E
English
Owner’s Manual
6. When the new start point is set, tap
.
7. The map returns with a transparent Vehimarker
(showing that there is no GPS reception). If an active
route already existed, it is now recalculated starting
from the selected location.
8. To return to normal navigation, tap
.
3.4.3 Editing the list of destinations (Edit
Route)
You can edit the route by modifying the list of
destinations. You can add or remove destinations,
modify the start position or reorder the list.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Tap .
4. You have the following options:
•Tap to add a new destination.
•Tap to delete a destination.
•Tap to modify the start point of the route.
•Tap to reorder the list. You can do
it manually or you can let the application optimise
the route for you.
3.4.4 Pausing the active route
You do not need to pause the active route: when you
start driving again, Clarion Mobile Map restarts the
voice instructions from your position.
3.4.5 Cancelling the active route
To cancel the navigated route, do one of the following:
•If you are on the Map screen, tap and then
tap
. (If you have a route with waypoints, you
need to tap
until all waypoints are deleted.)
•In the Navigation menu, tap and
then tap .. The active route is
deleted with all its waypoints.
3.4.6 Checking route alternatives when
planning the route
You can select from different route alternatives or
change the route planning method after you have
selected a new destination. Do as follows:
1. Select a destination as explained earlier, and
get to the route confirmation screen.
2. Tap .
3. Tap .
4. You see the basic details of three route
alternatives with the selected route planning method.
Tap any of them to see it on the map.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 34 2011-2-23 11:24:07
35NX501E/NZ501E
English
English
Owner’s Manual
5. Or if you cannot find a good alternative, tap
and scroll down for routes with different
routing methods.
6. Select one of the route alternatives and tap
to return to the previous screen. Clarion
Mobile Map recalculates the route. The orange line now
shows the new recommended route.
3.4.7 Checking route alternatives for an
existing route
To recalculate the active route with a different route
planning method, you can modify the Route settings
(page 45). There is another way to do this and to
compare different route alternatives with the same route
planning method. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Tap .
4. Tap .
5. You see the basic details of three route
alternatives with the selected route planning method.
Tap any of them to see it on the map.
6. Or if you cannot find a good alternative, tap
and scroll down for routes with different
routing methods.
7. Select one of the route alternatives then tap
and hold
for a few seconds to return
to the Map screen. Clarion Mobile Map recalculates
the route. The orange line now shows the new
recommended route.
3.4.8 Changing the vehicle used in route
planning
To recalculate the active route for a different vehicle, do
as follows. These changes can also be made in Settings
(page 45).
1. On the Map screen, tap and then tap
.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 35 2011-2-23 11:24:09
36 NX501E/NZ501E
English
Owner’s Manual
2. Tap and then tap one of the
following:
•
•
•
•
3. Clarion Mobile Map recalculates the route
optimised for the new vehicle type. The orange line now
shows the new recommended route.
3.4.9 Changing the road types used in route
planning
To recalculate the active route with different road type
preferences, do as follows. These changes can also be
made in Settings (page 45).
1. On the Map screen, tap and then tap
.
2. Tap any of the listed road types to modify the
route. If needed, scroll the list for all road types. You
have the following options (their order depends on the
selected vehicle type):
• - You might need to avoid
motorways when you are driving a slow car or you
are towing another vehicle.
• - Charge roads are pay roads where
you can purchase a pass or vignette to use the road
for a longer period of time. They can be enabled or
disabled separately from toll roads.
• - Clarion Mobile Map includes toll
roads (pay roads where there is a per-use charge)
in the routes by default. If you disable toll roads,
Clarion Mobile Map plans the best toll-free route.
• - Clarion Mobile Map includes
ferries in a planned route by default. However, a
map does not necessarily contain information
about the accessibility of temporary ferries. You
might also need to pay a fare on ferries.
• - Clarion Mobile Map excludes
unpaved roads by default: unpaved roads can be
in a bad condition and usually you cannot reach the
speed limit on them.
3. Tap to confirm the changes.
Clarion Mobile Map recalculates the route. The orange
line now shows the new recommended route.
3.5 Saving a location as a Favourite
destination
You can add any location to Favourites, the list of
frequently used destinations. Planning a route to one
of the Favourite destinations is described on page 29.
1. Select a destination as described before. It
can be an address, a Place, any location on the map,
a previously used destination from History, a coordinate
or a location where a photo was taken.
2. When the full screen map appears with the
selected location in the middle, tap
.
3. Tap .
4. (optional) Using the keyboard, you can
change the name offered for the Favourite. Tap
to
enter numbers or symbols.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 36 2011-2-23 11:24:11
37NX501E/NZ501E
English
English
Owner’s Manual
5. Tap to save the location as a
new Favourite destination.
3.6 Saving a location as an alert point
You can save any map location as an alert point (for
example a speed camera or a railway crossing).
1. Browse the map and select a location. The red
Cursor appears there.
2. Tap .
3. Scroll down the list and tap .
4. On the newly opened screen, select the type
of the alert point, the direction from which you expect
the alert, and (if applicable) the speed limit for this alert
point.
5. Tap to save the location as a
new alert point.
3.7 Editing an alert point
You can edit a previously saved or uploaded alert point
(for example a speed camera or a railway crossing).
1. Browse the map and select the alert point to
edit. The red circle appears around the alert point.
Tap
2. Scroll down the list and tap .
3. On the newly opened screen, modify the type
of the alert point, the direction from which you expect
the alert, or (if applicable) the speed limit for this alert
point.
4. Tap to save the changes to the
alert point.
3.8 Watching the simulation of the route
You can run a simulated navigation that demonstrates
the active route. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap .
3. Tap .
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 37 2011-2-23 11:24:13
38 NX501E/NZ501E
English
Owner’s Manual
4. Scroll down the list and tap . The simulation starts from the starting point of the route, and
using a realistic speed, it leads you through the whole recommended route.
1. (optional) You have the following controls during the simulation (the control buttons disappear after a few
seconds but you can open them again if you tap the map):
• : Jump to the next route event (manoeuvre).
• : Pause the simulation.
• : Jump to the previous route event (manoeuvre).
• : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal
speed.
2. Tap to stop the simulation.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 38 2011-2-23 11:24:14
39NX501E/NZ501E
English
English
Owner’s Manual
4
Reference Guide
On the following pages you will find the description of the different concepts and menu screens of Clarion Mobile
Map.
4.1 Concepts
4.1.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
•While following a route: when approaching a turn, it will zoom in and raise the view angle to let you easily
recognise your manoeuvre at the next junction. If the next turn is at a distance, it will zoom out and lower the
view angle to be flat so you can see the road in front of you.
•While driving without an active route: Smart Zoom will zoom in if you drive slowly and zoom out when you drive
at high speed.
4.1.2 Daytime and night colour themes
Clarion Mobile Map uses different colour themes during the day and during the night for both the map and the
menu screens.
•Daytime colours are similar to paper road maps, and the menus are bright.
•The night colour themes use dark colours for large objects to keep the average brightness of the screen low.
Clarion Mobile Map offers different daytime and night colour profiles. It can also switch automatically between the
daytime and the night schemes based on the current time and GPS position a few minutes before sunrise, when the
sky has already turned bright, and a few minutes after sunset, before it becomes dark.
4.1.3 Route calculation and recalculation
Clarion Mobile Map calculates the route based on your preferences:
•Route planning methods:
• : Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best
selection for fast and normal cars.
• : Gives a route that has the smallest total distance of all possible routes. It can be practical for
slow vehicles.
• : Gives a quick but fuel efficient route based on the fuel consumption data given in Green Routing
settings (page 75). Travel cost and CO
2
emission calculations are estimations only. They cannot take elevations,
curves and traffic conditions into account.
• : Results in a route with fewer turns and no difficult manoeuvres. With this option, you can make
Clarion Mobile Map to take, for example, the motorway instead of a series of smaller roads or streets.
•Vehicle types:
• :
•Manoeuvre restrictions and directional constraints are taken into account when planning a route.
•Roads are used only if access for cars is allowed.
•Private roads and resident-only roads are used only if they are inevitable to reach the destination.
•Walkways are excluded from routes.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 39 2011-2-23 11:24:14
40 NX501E/NZ501E
English
Owner’s Manual
• :
•All manoeuvres are available in intersections.
•Directional constraints are taken into account the
way that opposite direction is allowed with a low
speed.
•A private road is used only if the destination is
there.
•Walkways are excluded from routes.
• :
•Manoeuvre restrictions and directional constraints
are taken into account when planning a route.
•Roads are used only if access for buses is allowed.
•Private roads, resident-only roads and walkways
are excluded from routes.
• :
•Manoeuvre restrictions and directional constraints
are taken into account when planning a route.
•Roads are used only if access for taxis is allowed.
•Private roads, resident-only roads and walkways
are excluded from routes.
•Road types used or avoided in route calculation:
•
•
•
•
•
Real-time Traffic events are also taken into account and
sometimes greatly modify the route.
Clarion Mobile Map automatically recalculates the
route if you deviate from the proposed itinerary or if
a newly received Traffic event concerns a part of the
recommended route.
For further information about Route settings, see page
45.
4.1.4 Green routing
Route calculation is not only about finding the quickest
or shortest route. For some of the vehicle types, you
can also check the fuel consumption and CO
2
emission
when planning a route, and you can create cost effective
routes with less effect on the environment.
In Settings, select
to enter the necessary
parameters of your vehicle and the average fuel price.
You can also select whether you want to see the
difference between your route and the green route even
if the selected routing method is not Green.
After the above parameters are set, select
as route planning method to get a
fast but also fuel efficient route. Note that travel cost
and CO
2
emission calculations are estimations only.
They cannot take elevations, turns, curves and traffic
conditions into account. Also, this routing is not meant
to give you the „greenest” route of all. It is still important
to travel quickly so the result is a fast route with low fuel
consumption and CO
2
emission.
With a vehicle type where green routing is selectable,
whichever route planning method is selected, the Green
details are also shown when you confirm the route:
If the selected route planning method is not Green,
and you have allowed the application to show the
green alternative, the price, fuel consumption and CO
2
emission differences between your selected route and
the Green route are also shown on this screen:
Tap the field with these details to switch the route to
Green immediately.
4.1.5 Road safety cameras and other
proximity alert points
There is a special proximity warning for road safety
cameras (like speed or red light cameras) and other
proximity alert points (like schools or railroad crossings).
These alert points are preloaded in Clarion Mobile Map.
You can download more from clarion.naviextras.com or
you can upload points in a specific text file if needed.
You can also add your own alert points or edit the
preloaded or uploaded points. See page 37 for details.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 40 2011-2-23 11:24:15
41NX501E/NZ501E
English
English
Owner’s Manual
The application can warn you when you approach road
safety cameras like speed cameras or dangerous areas
like school zones or railroad crossings. You can set
up the different alert types individually in Sound and
Warning settings (page 44).
The following alert types are available:
•Audio warning: beeps or the spoken type of the
alert can be played while you are approaching one
of these points, or extra alert sounds if you exceed
the given speed limit while approaching.
•Visual warning: the type of the alert point, its
distance and the related speed limit appear on
the Map screen while you are approaching one of
these cameras. The distance from the camera is
also displayed.
For some of the alert points, the enforced or expected
speed limit is available. For these points, the audio
alert can be different if you are below or above the
given speed limit.
•Only when speeding: The audio alert is only played
when you exceed the given speed limit.
•When approaching: The audio alert is always
played. In order to draw your attention, the alert
can be different if you exceed the speed limit.
Note!
The warning for road safety cameras
is disabled when the GPS position is
not yet available or if you are in certain
countries where road safety camera
warning is prohibited.
4.1.6 Speed limit warning
Maps may contain information about the speed limits of
the road segments. Clarion Mobile Map is able to warn
you if you exceed the current limit. This information may
not be available for your region (ask your local dealer),
or may not be fully correct for all roads in the map.
Speed warning can be fine-tuned in Sound and Warning
settings (page 44).
You can set the relative speed above which the
application initiates the warning.
The following alert types are available:
•Audio warning: you receive a verbal warning
when you exceed the speed limit with the given
percentage.
•Visual warning: the current speed limit is shown on
the map when you exceed it (for example:
).
You can also choose to see the speed limit sign on the
map all the time.
4.1.7 Traffic information in route planning
The recommended route is not always the same
between two points. Real-time traffic information can
help you avoid current traffic events like temporary road
closures or a traffic jam caused by an accident. The
function is subject to data availability.
You can display the live traffic information on the map
if you browse the map and select this option from the
More menu. A 2D map is displayed with road segments
coloured by the severity of traffic events. Tap the event
type icon at the road segment and then tap the
button to get information about the traffic event.
4.1.7.1 Real-time traffic information (TMC
TMC (Traffic Message Channel) can provide you with
the real-time status of the traffic. Route calculation can
avoid road blocks or unexpected traffic jams caused by
an accident.
TMC is a specific application of the FM Radio Data
System (RDS) used for broadcasting real-time traffic
and weather information.
Using traffic information is enabled by default in Clarion
Mobile Map.
Note!
TMC is not a global service. It may not be
available in your country or region. Ask
your local dealer for coverage details.
NX501E/NZ501E contains the TMC receiver that is
needed to receive Traffic events.
If public Traffic data is broadcast at your location,
Clarion Mobile Map automatically takes into account the
traffic events received. You do not need to set anything
in the program. The receiver will automatically search
the FM radio stations for TMC data, and the decoded
information will immediately be used in route planning.
When Clarion Mobile Map receives traffic information
that may affect your route, the program will warn you
that it is recalculating the route, and navigation will
continue with a new route that is optimal considering
the most up-to-date traffic conditions.
To fine-tune this recalculation, you can set the minimum
delay that can trigger a route recalculation, or you can
instruct Clarion Mobile Map to have you confirm the
new recommended route before it takes effect. You can
do these in Traffic settings (page 45).
A special icon (
) is displayed on the Map screen to
show you whether traffic events are received. The icon
shows the status of the traffic receiver when there are
no traffic events on your route, otherwise it shows the
type of the next traffic event on your route.
Road segments affected by traffic events are displayed
with an alternate colour on the map, and small symbols
above the road show the nature of the event:
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 41 2011-2-23 11:24:16
42 NX501E/NZ501E
English
Owner’s Manual
Tap to open the Traffic Summary screen:
Tap to open the list of traffic events:
Now tap any of the list items to see its details, and to display the affected road segment in its full length on the map:
Note!
If there are traffic events on the recommended route that the application has not bypassed, the
icon will open the list of significant traffic events to let you quickly check them.
4.2 ‘More’ menu
The ‚More’ menu provides you with various options and additional applications. Tap the following buttons:
, .
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 42 2011-2-23 11:24:17
43NX501E/NZ501E
English
English
Owner’s Manual
Button Description
You can configure the program settings, and modify the behaviour of Clarion Mobile Map. Fine-tune
route planning options, change the look of the Map screen, turn on or off warnings, or restart the
Configuration wizard, etc.
See the next chapter for details.
Visit clarion.naviextras.com to get additional content, such as new maps or 3D landmarks and useful
applications.
The scientific calculator helps you in all your calculation needs. Tap the Mode button for additional
functions and use the memory to save your results.
The Fuel consumption monitor helps you keep track of the consumption of your car even if you
do not use navigation for all your journeys. Set the initial odometer value and then record the
distance taken and fuel filled in whenever you fill your car. You can also set reminders for regular car
maintenance.
Tap this button to see the sunlit and dark areas of the world. Your current location and route points
are marked on the map. Tap the Details button to see the exact sunrise and sunset times for all your
route points (your current location, all waypoints and the final destination).
If you save your trip logs when you arrive at some of your destinations or let the application
automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see the
trip statistics, speed and altitude profile. If track log has also been saved, you can display it on the
map with the selected colour. Track logs can be exported to GPX files for later use.
Select a country from the list and see useful driving information about the selected country. Information
may include speed limits on different road types, the maximum blood alcohol level and any compulsory
equipment you need to show when stopped by the police.
Read the Tutorial to get instant understanding of the functions of your software.
Run the Demo to watch sample route simulations to see how navigation works.
The About section provides you with product information. Read the Software and Database End User
License Agreement, or check the map and other contents of the application. You can also access
program usage statistics.
4.3 Settings menu
You can configure the program settings, and modify the behaviour of Clarion Mobile Map. Tap the following buttons:
, , .
The Settings menu has several options. Tap
or scroll with your finger to see the full list.
Button Description
Adjust the sound volume, mute your device or change the voice guidance language. In
addition, you can enable and set up different warnings and alerts.
The content of the Quick menu (page 12) is fully customisable. Tap the button you want to
change, and select its new function from the list.
The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
These settings determine how routes will be calculated. Select the type of vehicle you are
driving, the road types used in route planning, and the route planning method.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 43 2011-2-23 11:24:18
44 NX501E/NZ501E
English
Owner’s Manual
Button Description
These settings determine how Green routes will be calculated. They are also used to display
the cost and CO
2
emission of routes.
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs,
choose suitable colour themes from the list for both daytime and night use, change the red
arrow to a 3D car model, show or suppress 3D buildings, turn track logging on or off, and
manage you Place visibility sets (which Places to show on the map).
Settings related to guidance on the map screen can be adjusted here.
Display related settings.
These settings allow you to customise the application for your local language, measurement
units, time and date settings and formats, as well as to choose the time zone.
Trip logs and track logs contain useful information about your trips. Trip logs can be saved
manually when you reach your destination or you can turn on the automatic saving here.
Modify the basic software parameters set during the initial setup process. For details, see
page 4.
Delete all saved data and reset all settings to their factory defaults.
4.3.1 Sound and Warnings
Button Description
Tap this button to adjust the volume of the different sounds in the application. A new screen
shows the different sound types and their controls. See below for details.
This button shows the current voice guidance profile. By tapping the button, you can select a
new profile from the list of available languages and speakers. Tap any of these to hear a sample
voice prompt. Just tap
when you have selected the new spoken language.
Maps may contain information about the speed limits of the road segments. Clarion Mobile
Map is able to warn you if you exceed the current limit. This information may not be available
for your region (ask your local dealer), or may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive visible and/or audible warnings.
Adjust the slider to set the relative speed above which the application initiates the warning.
The following alert types are available:
• Audio warning: you receive a verbal warning when you exceed the speed limit with
the given percentage.
• Visual warning: the current speed limit is shown on the map when you exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it is shown only if your
speed exceeds it), you can set it here.
This feature allows you to receive a warning when approaching a Road Safety Camera. You
must ensure on your own liability that using this feature is legal in the country where you intend
to use it.
This button is not displayed when GPS position is not available or if you are in certain countries
where road safety camera warning is prohibited. Even if the button is available, you are
responsible for checking whether it is legal to use this feature at your location.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 44 2011-2-23 11:24:19
45NX501E/NZ501E
English
English
Owner’s Manual
Button Description
The application can warn you when you approach road safety cameras like speed cameras
or dangerous areas like school zones or railroad crossings. Tap this button and set the
different alert types individually. The following alert types are available: Audio warning:
beeps or the name of the alert type can be played while you are approaching the camera,
or extra alert sounds if you exceed the speed limit while approaching one of these cameras.
Visual warning: the type of the alert point, its distance and the related speed limit appear
on the Map screen while you are approaching one of these cameras. The distance from the
camera is also displayed. For some of the alert points, the enforced or expected speed limit
is available. For these points, the audio alert can be different if you are below or above the
given speed limit. Only when speeding: The audio alert is only played when you exceed the
given speed limit. When approaching: The audio alert is always played. In order to draw your
attention, the alert can be different if you exceed the speed limit. Road safety cameras are
not displayed in the list when GPS position is not available or if you are in certain countries
where road safety camera warning is prohibited.
Maps may contain driver alert information. Tap this button to turn on or off these warnings and
to set the distance from the hazard to receive the warning at. These can be set individually for
the different warning types.
4.3.2 Customise Quick menu
The content of the Quick menu (page 14) is fully customisable. Tap the button you want to change, and select its
new function from the list.
The list of available functions and their descriptions are on page 14.
4.3.3 Traffic settings
The recommended route is not always the same between two points. Whenever suitable data exists, traffic
information can be taken into account in the route calculation
Button Description
Use this switch to enable or disable the TMC receiver that can receive real-time traffic
information. The rest of the buttons below are all related to the TMC function and are available
only if the receiver is enabled.
This setting determines how Clarion Mobile Map uses the received real-time traffic information
in route calculation. When calculating a new route, or when recalculation becomes necessary
based on the received Traffic events, Clarion Mobile Map avoids traffic events if it makes
sense.
You can also set the minimum delay that triggers route recalculation, and you can instruct the
application if you want to confirm every recalculation.
Tap this button to open the list of traffic event types, and select which events to take into
account in route calculation.
Tap this button for the list of available TMC service providers.
4.3.4 Route settings
These settings determine how routes will be calculated.
Button Description
You can set the type of vehicle you will use to navigate the route. Based upon this setting, some
of the road types can be excluded from the route, or some of the restrictions may not be taken
into account in route calculation.
The route calculation can be optimised for different situations and vehicle types by changing
the planning method. See below for details.
To let the route fit your needs, you can also set which road types are to be considered for or to be excluded from
the route if possible.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 45 2011-2-23 11:24:19
46 NX501E/NZ501E
English
Owner’s Manual
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your destination can only be
accessed using some of the excluded road types, they will be used but only as much as necessary. In this case a
warning icon will be shown on the My Route screen, and the part of the route not matching your preference will be
displayed in a different colour on the map.
In the list of road types you can see in how many segments and what total length of the road type is used in the
current route.
Button Description
You might need to avoid motorways when you are driving a slow car or you are towing
another vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to use the road for a
longer period of time. They can be enabled or disabled separately from toll roads.
Clarion Mobile Map includes toll roads (pay roads where there is a per-use charge) in the
routes by default. If you disable toll roads, Clarion Mobile Map plans the best toll-free route.
Clarion Mobile Map includes ferries in a planned route by default. However, a map does not
necessarily contain information about the accessibility of temporary ferries. You might also
need to pay a fare on ferries.
Clarion Mobile Map excludes unpaved roads by default: unpaved roads can be in a bad
condition and usually you cannot reach the speed limit on them.
Vehicle types:
• :
•Manoeuvre restrictions and directional constraints are taken into account when planning a route.
•Roads are used only if access for cars is allowed.
•Private roads and resident-only roads are used only they are inevitable to reach the destination.
•Walkways are excluded from routes.
• :
•All manoeuvres are available in intersections.
•Directional constraints are taken into account the way that opposite direction is allowed with a low speed.
•A private road is used only if the destination is there.
•Walkways are excluded from routes.
• :
•Manoeuvre restrictions and directional constraints are taken into account when planning a route.
•Roads are used only if access for buses is allowed.
•Private roads, resident-only roads and walkways are excluded from routes.
• :
•Manoeuvre restrictions and directional constraints are taken into account when planning a route.
•Roads are used only if access for taxis is allowed.
•Private roads, resident-only roads and walkways are excluded from routes.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 46 2011-2-23 11:24:19
47NX501E/NZ501E
English
English
Owner’s Manual
Route Planning Method types:
Button Description
Gives a quick route if you can travel at or near the speed limit on all roads. Usually the best
selection for fast and normal cars.
Gives a short route to minimise the distance to travel. It can be practical for slow vehicles.
Searching for a short route regardless of the speed, this route type is rarely practical for
normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption data given in Green
Routing settings (page 47). Travel cost and CO
2
emission calculations are estimations only.
They cannot take elevations, curves and traffic conditions into account.
Results in a route with fewer turns and no difficult manoeuvres. With this option, you can
make Clarion Mobile Map to take, for example, the motorway instead of a series of smaller
roads or streets.
4.3.5 Green routing settings
These settings determine how Green routes will be calculated. They are also used to display the cost and CO
2
emission of routes.
Button Description
Enter the average consumption of your vehicle when used in built-up areas. If necessary, tap
and select to change the measurement unit.
Enter the average consumption of your vehicle when used on highways. If necessary, tap
and select to change the measurement unit.
Select the engine and fuel type of your vehicle. This helps in estimating the CO
2
emission.
Enter the average fuel price for travel cost calculation. If necessary, tap and
select to change the currency.
If the selected routing method is not Green, you can have your route compared to the best
green alternative on the screen when confirming the route. If this alternative is much better
than the selected method, you can quickly switch to Green mode.
4.3.6 Map settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable colour
themes from the list for both daytime and night use, change the red arrow to a 3D car model, show or hide 3D
buildings, turn track logging on or off, and manage you Place visibility sets (which Places to show on the map).
The map is always shown on the screen so that you can see the effect when you change a setting.
Button Description
Switch the map view between a 3D perspective view and a 2D top-down view.
Adjust the basic zoom and tilt levels to your needs. Three levels are available.
Switch between daytime and night colour modes or let the software switch between the two
modes automatically a few minutes before sunrise and a few minutes after sunset.
Select the colour scheme used in daytime mode.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 47 2011-2-23 11:24:20
48 NX501E/NZ501E
English
Owner’s Manual
Button Description
Select the colour scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models. You can select separate
icons for different vehicle types selected for route planning. Separate icons can be used for
car, pedestrian and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of prominent or well-
known objects.
Show or suppress 3D city models, 3D artistic or block representation of full city building data
containing actual building size and position on the map.
Turn on or off track log saving, that is, saving the sequence of the locations your journeys
go through.
Select which Places to show on the map while navigating. Too many Places make the map
crowded so it is a good idea too keep as few of them on the map as possible. For this, you
have the possibility to save different Place visibility sets. You have the following possibilities:
• Tap the checkbox to show or hide the Place category.
• Tap the name of the Place category to open the list of its subcategories.
• Tap to save the current Place visibility set or to load a previously
saved one. Here you can also revert to the default visibility settings.
4.3.7 Visual guidance settings
Settings related to guidance on the map screen can be adjusted here.
The data fields in the corner of the Map screen can be customised. Tap this button and select
the values you want to see. The values can be different when you navigate a route from
when you are just cruising without a given destination. You can select general trip data like
your current speed or the altitude, or route data related to your final destination or the next
waypoint on your route.
Whenever adequate information is available, lane information similar to the real ones on road
signs above the road is displayed at the top of the map. You can turn this feature on or off.
If you are approaching a motorway exit or a complex intersection and the needed
information exists, the map is replaced with a 3D view of the junction. You can turn this
feature on or let the map be displayed for the whole route.
Turn on the route progress bar to see your route as a straight line on the left side of the map.
The red arrow represents your current position and moves up as you travel. Waypoints and
Traffic events are also displayed on the line.
4.3.8 Display settings
Display related settings include menu animations, separate skins for daytime and night use and the brightness of
the display.
When animation is turned on, buttons on menus and keyboard screens appear in an
animated way. Screen transitions are also animated.
4.3.9 Regional settings
These settings allow you to customise the application for your local language, measurement units, time and date
settings and formats, as well as to choose the time zone.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 48 2011-2-23 11:24:21
49NX501E/NZ501E
English
English
Owner’s Manual
Button Description
This button displays the current written language of the user interface. By tapping the
button, you can select a new language from the list of available languages. The application
will restart if you change this setting; you are asked to confirm this.
You can set the distance units to be used by the program. Clarion Mobile Map may not
support all the listed units in some voice guidance languages.
Select between 12 and 24 hours time display and the various international date display
formats.
By default, time zone is taken from the map information and adjusted by your current
location. Here you can set time zone and daylight saving manually.
4.3.10 Trip monitor settings
Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach your
destination or you can turn on the automatic saving here. You can access these logs in the Trip monitor. Trip monitor
is available from the More menu.
Trip monitor can record statistical data of your trips. If you need these logs later, you can let
the application save them automatically for you.
This is not a button. This line shows the current size of the trip database, the sum of all trip
and track logs saved.
Track logs, the sequence of the positions given by the GPS receiver, can be saved together
with trip logs. They can later be displayed on the map. You can let the application save the
track log whenever it saves a trip.
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 49 2011-2-23 11:24:21
50 NX501E/NZ501E
English
Owner’s Manual
5
Glossary
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate
its (your) position and needs at least four signals to
give a three-dimensional position, including elevation.
Because the satellites are moving and because objects
can block the signals, your GPS device might not
receive four signals. If three satellites are available, the
receiver can calculate the horizontal GPS position but
the accuracy is lower and the GPS device does not
give you elevation data: only 2D reception is possible.
Active route
The currently navigated route. Whenever the destination
is set, the route is active until you delete it, reach your
destination or you quit Clarion Mobile Map. See also:
Route.
City Centre
The city/town centre is not the geometric centre of the
city/town but an arbitrary point the map creators have
chosen. In towns and villages, it is usually the most
important intersection; in larger cities, it is one of the
important intersections.
Colour theme
Clarion Mobile Map comes with different colour themes
for daytime or night use of the map and menu screens.
Themes are custom graphic settings and they can have
different colours for streets, blocks or surface waters
in 2D and 3D modes, and they display shades or
shadows in different ways in 3D mode.
One daytime scheme and one night scheme is always
selected for the map and for the menus. Clarion Mobile
Map uses them when it switches from day to night and
back.
GPS accuracy
Several factors have impact on the deviation between
your real position and the one given by the GPS
device. For example, signal delay in the ionosphere or
reflecting objects near the GPS device have a different
and varying impact on how accurately the GPS device
can calculate your position.
Map
Clarion Mobile Map works with digital maps which are
not simply the computerised versions of traditional
paper maps. Similarly to the paper road maps, the 2D
mode of digital maps show you streets, roads, and
elevation is also shown by colours.
In 3D mode, you can see the altitude differences, for
example valleys and mountains, elevated roads, and in
selected cities 3D landmarks and 3D buildings are also
displayed.
You can use digital maps interactively: you can zoom
in and out (increase or decrease the scale), you can tilt
them up and down, and rotate them left and right. In
GPS-supported navigation, digital maps facilitate route
planning.
Road Safety Camera
Special alert points for speed, red light or bus lane
cameras. Different data sources are available. You can
configure Clarion Mobile Map to warn you when you
approach one of these cameras.
Detecting the location of Road Safety Cameras
is prohibited in certain countries. It is the sole
responsibility of the driver to check whether this feature
can be used during the trip.
The software is capable of showing and warning
for more than just cameras. Various other types of
proximity alert points like school zones and railway
crossings are also available.
Route
A sequence of route events, i.e. manoeuvres (for
example, turns and roundabouts) to reach the
destination. The route contains one start point and one
or more destinations. The start point is the current (or
last known) position by default. If you need to see a
future route, the start point can be replaced with any
other given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always
points in the current driving direction. This is the default
orientation in 3D map view mode.
Vehimarker
The current position is shown with a red arrow on the
map by default. The direction of the red arrow shows
the current heading. This position marker can be
replaced with different vehicle symbols. You can even
specify different Vehimarkers for different route types
(depending on which vehicle type is selected for route
calculation).
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 50 2011-2-23 11:24:21
51NX501E/NZ501E
English
English
Owner’s Manual
6
End User Licence Agreement
1 The contracting parties
1.1 This Agreement has been entered into by and
between NNG Kft. (registered seat: 23 Bérc utca,
H-1016 Budapest, Hungary; Company reg.no.: 01-09-
891838) as Licensor (hereinafter: Licensor) and You as
the User (hereinafter: User; the User and the Licensor
jointly referred to as: Parties) in subject of the use of the
software product specified in this Agreement.
2 Conclusion of the Agreement
2.1 The Parties hereby acknowledge that this
Agreement shall be concluded by implicit conduct of
the Parties without signing the Agreement,
2.2 The User hereby acknowledges that following the
lawful acquisition of the software product constituting
the object of this Agreement (Section 4), any degree
of use, installation into a computer or other hardware,
installation of such hardware into a vehicle, pressing of
the “Accept” button displayed by the software during
installation or use (hereinafter referred to as Use)
shall mean that the User has accepted the terms and
conditions of this Agreement as legally binding.
2.3 This Agreement shall by no means authorise use
of the software product by those persons having
unlawfully acquired the software product or having
unlawfully installed it on a computer or in a vehicle.
3 Relevant laws and regulations
3.1 Any action related to this Agreement will be
governed by the laws of the Republic of Hungary, with
specific reference to Act IV of 1959 on the Civil Code
and to Act LXXVI of 1999 on Copyrights shall apply.
3.2 The original language version of this Agreement is
the Hungarian version. This Agreement has versions
in other languages as well. In case of dispute the
Hungarian version shall prevail.
4 Object of the Agreement and Termination
4.1 The object of this Agreement shall be the navigation
guidance software product of Licensor (hereinafter
referred to as the Software Product).
4.2 The Software Product shall include the operating
computer program, its complete documentation, the
map database pertaining thereto and any third-party
content and services accessible through the Software
Product (hereinafter: Database).
4.3 Any form of display, storage, coding, including
printed, electronic or graphic display, storage, source
or object code, or any other as yet undefined form of
display, storage, or coding, or any medium thereof shall
be deemed parts of the Software Product.
4.4 Error corrections, additions, updates used by the
User following the conclusion of this Agreement shall
also be deemed parts of the Software Product.
4.5 Your rights under this Agreement will terminate
immediately without notice from Licensor if you
materially breach it or take any action in derogation of
Licensor’s and/or its licensors’ rights to the Software
Product. Licensor may terminate this Agreement
should any Software Product become, or in Licensor’s
reasonable opinion likely to become, the subject of
a claim of intellectual property infringement or trade
secret misappropriation. Upon termination, you will
cease use of, and destroy Software Product and
confirm compliance in writing to Licensor
5 Rights under copyright
5.1 Unless otherwise provided by law or contractual
provisions, the Licensor is the sole and exclusive
owner of all material copyrights vested in the Software
Product.
5.2 Copyrights extend to the whole Software Product
and to its parts separately as well.
5.3 The owner(s) of the copyrights of the Database
forming part of the Software Product is (are) the natural
person(s) or corporate entity(ies) listed in the Appendix
to this Agreement or in the “About” menu item of the
operating computer programme (hereinafter referred to
as Database Owner). The user’s manual of the Software
Product includes the name of the menu option where
all the owners of the Database items are listed. The
Licensor hereby states that it has obtained sufficient
usage and representation rights from the Database
owners in order to utilise the Database, to offer it for
utilisation and to transfer it for utilisation as set forth in
this Agreement.
5.4 Pursuant to this Agreement, all rights vested in the
Software Product shall remain in the ownership of the
Licensor, except for those to which the User is entitled
under law or by virtue of this Agreement.
6 Rights of the User
6.1 The User is entitled to install the Software Product
into one hardware device (desktop, handheld, portable
computer, navigation device), and to run and use one
copy of the Software Product or a preinstalled copy of
the Software Product thereon.
6.2 The User is entitled to make one backup copy of
the Software Product. However, if the Software Product
operates after installation without the use of the original
media copy, then the original media copy shall be
deemed to be a backup copy. In all other cases, the
User is only entitled to use the backup copy if the
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 51 2011-2-23 11:24:21
52 NX501E/NZ501E
English
Owner’s Manual
original media copy of the Software Product has been
ascertainably and unequivocally rendered unsuitable
for its lawful and intended use.
7 Limitations of use
7.1 The User is not entitled
7.1.1 to duplicate the Software Product (to make a
copy thereof);
7.1.2 to lease, rent or lend it or to transfer it to a third
person for any reason;
7.1.3 to translate the Software Product (including
translation (compilation) to other programming
languages);
7.1.4 to decompile the Software Product;
7.1.5 to evade the protection of the Software Product
or to modify, circumvent or obviate such protection
through technological or by any other means;
7.1.6 to modify, extend, transform the Software Product
(in whole or in part), to separate it into parts, combine it
with other products, install it in other products, utilise it
in other products, not even for the purpose of achieving
interoperability with other devices;
7.1.7 apart from using the computer program, to obtain
information from the Database as a part of the Software
Product, to decompile the Database, to use, copy,
modify, extend, transform the Database in whole or in
part or the group of data stored therein, or to install it in
other products or otherwise, utilise it in other products
or to transfer it, not even with the aim of achieving
interoperability with other products.
7.2 The User may only use the contents available
through the Software Product and provided by third
parties and the data received through the services
provided by third parties (including but not limited
to the traffic data received from the RDS TMC traffic
information service) for his/her own personal benefit
and at his/her own risk. It is strictly prohibited to store,
to transfer or to distribute these data or contents or
to disclose them in full or in part to the public in any
format or to download them from the product.
8 No warranty, limitation of liability
8.1 The Licensor hereby informs the User that although
the greatest care was taken in producing the Software
Product, given the nature of the Software Product and
its technical limitations, the Licensor does not provide
a warranty for the Software Product being completely
error-free, and the Licensor is not bound by any
contractual obligation whereby the Software Product
obtained by the User should be completely error-free.
8.2 The Licensor does not warrant that the Software
Product is suitable for any purpose defined either by
the Licensor or the User, and does not warrant that
the Software Product is capable of interoperating with
any other system, device or product (e.g. software or
hardware).
8.3 The Licensor does not assume any responsibility
for damages incurred due to an error in the Software
Product (including errors of the computer program, the
documentation and the Database).
8.4 The Licensor does not assume any responsibility
for damages incurred due to the Software Product not
being applicable for any defined purpose, or due to the
error or incompatibility of the Software Product with
any other system, device or product (e.g. software or
hardware).
8.5 The Licensor also draws the attention of the User
to the fact that, when using the Software Product in
any form of vehicle, observing the traffic regulations
and rules (e.g. use of obligatory and/or reasonable
and suitable security measures, proper and generally
expected care and attention in the given situation, and
special care and attention required due to the use of
the Software Product) is the exclusive responsibility
of the User. The Licensor shall not assume any
responsibility for any damages occurred in relation to
use of the Software Product in a motor vehicle.
8.6 By concluding the Agreement, the User shall,
in particular, acknowledge the information stated in
Section 8 above.
9 Sanctions
9.1 The Licensor hereby informs the User that, if the
Licensor finds its rights under the Copyright Act to be
breached, the Licensor may
9.1.1 seek judicial recognition of this breach;
9.1.2 demand that the breach cease and order the
person in breach to refrain from continuing such
actions;
9.1.3 demand that the person under breach give proper
compensation (even by way of publicity at the expense
of the person in breach);
9.1.4 claim the return of the increase of assets due to
the breach;
9.1.5 demand the cease of the wrongful action and,
demand restitution to its state before the breach was
committed at the expense of the person in breach,
and may demand the destruction of instruments and
materials used to commit the breach as well as of the
products created by the breach;
9.1.6 claim for damages.
9.2 The Licensor hereby also informs the User that the
breach of copyrights and related rights is a crime under
Act IV of 1978 on the Hungarian Criminal Code, which
may be sentenced of two years in prison in basic cases
and up to eight years in prison in aggravated cases.
9.3 Contents and services provided by third parties
The Licensor hereby excludes any liability of its own
for the Database in the Software Product and for
any content or service provided by a third party by
using the Database. The Licensor does not warrant
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 52 2011-2-23 11:24:21
53NX501E/NZ501E
English
English
Owner’s Manual
the quality, suitability, accuracy, fitness for a specific
purpose or territorial coverage of the product or service
or the availability of the service, and it specifically
excludes any liability for the suspension of the service,
and any damage arising in relation to the service or for
complete cancellation of the service.
The relevant information and data in connection with
the contents and services provided by third parties
are available at www.naviextras.com. The User hereby
acknowledges that the contents and services provided
by third parties may only be used at the risk of the User
and for the personal benefit of the User.
9.4 Contents and services provided by the Licensor or
an agent of the Licensor
The Licensor or a contractual partner may offer various
products and services to the User through www.
naviextras.com. The User may only use these services
when the User has read and understood the relevant
end user license agreement(s) at www.naviextras.com
and the User is obliged to use the services in line with
the terms and conditions thereof.
9.5 The parties hereby agree that the courts of the
Republic of Hungary will have exclusive jurisdiction
to rule on any disputes arising in connection with this
Agreement.
10 Anonymous data collection
10.1 The User hereby acknowledges that the Software
Product may collect and store data connected to
the usage of the Software Product by the User (e.g.
movement/route data, user interaction data). Such data
collection functions may be disabled or enabled by
User any time from within the corresponding menu. The
collected data is connected to the device type identifier
of the device running the Software Product and not
associated in any way with any personal information of
the User or with the User itself.
10.2 The collected data may be uploaded to Licensor’s
database and used exclusively for the purpose of
enhancing and improving the features and services of
the Software Product and the Databases. Uploading is
executed through Licensor’s special software or by the
User navigation device, and the upload may be enabled
or disabled by User. After successful data upload, the
collected data is deleted from the Software Product
storage media.
10.3 Collected data is transmitted, stored and handled
anonymously and no connection of the data with the
User shall be established by Licensor or any third party.
The product and the information contained herein are subject to change without prior notification.
This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or
mechanically, including photocopying and recording, without the express written consent of Clarion.
© 2010 - Clarion
Data Source © 2006-2010 Tele Atlas. All rights reserved. This material is proprietary and the subject of copyright
protection, database right protection and other intellectual property rights owned by Tele Atlas or its suppliers. The
use of this material is subject to the terms of a license agreement. Any unauthorised copying or disclosure of this
material will lead to criminal and civil liabilities.
All rights reserved.
7 Copyright note
Clarion_primo_1_1_EU_UserManual_EN-UK.indd 53 2011-2-23 11:24:21
Clarion Co., Ltd.
All Rights Reserved. Copyright
©
2011: Clarion Co., Ltd.
Printed in China / Imprime au Chiné / Impreso en China
2011/02 NX501E/NZ501E
NX_NZ501E说明书封面.indd 2 2011-2-23 15:58:49
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

clarion-nx501e

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clarion NX501E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Clarion NX501E

Clarion NX501E Bedienungsanleitung - Deutsch - 127 seiten

Clarion NX501E Bedienungsanleitung - Holländisch - 130 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info