Bedienungsanleitung Clarion NZ501E (Seite 110 von 123) (Englisch)

473614

110

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

41NX501E/NZ501E

English

Owner’s Manual

The application can warn you when you approach road

safety cameras like speed cameras or dangerous areas

like school zones or railroad crossings. You can set

up the different alert types individually in Sound and

Warning settings (page 44).

The following alert types are available:

•Audio warning: beeps or the spoken type of the

alert can be played while you are approaching one

of these points, or extra alert sounds if you exceed

the given speed limit while approaching.

•Visual warning: the type of the alert point, its

distance and the related speed limit appear on

the Map screen while you are approaching one of

these cameras. The distance from the camera is

also displayed.

For some of the alert points, the enforced or expected

speed limit is available. For these points, the audio

alert can be different if you are below or above the

given speed limit.

•Only when speeding: The audio alert is only played

when you exceed the given speed limit.

•When approaching: The audio alert is always

played. In order to draw your attention, the alert

can be different if you exceed the speed limit.

Note!

The warning for road safety cameras

is disabled when the GPS position is

not yet available or if you are in certain

countries where road safety camera

warning is prohibited.

4.1.6 Speed limit warning

Maps may contain information about the speed limits of

the road segments. Clarion Mobile Map is able to warn

you if you exceed the current limit. This information may

not be available for your region (ask your local dealer),

or may not be fully correct for all roads in the map.

Speed warning can be ﬁne-tuned in Sound and Warning

settings (page 44).

You can set the relative speed above which the

application initiates the warning.

The following alert types are available:

•Audio warning: you receive a verbal warning

when you exceed the speed limit with the given

percentage.

•Visual warning: the current speed limit is shown on

the map when you exceed it (for example:

You can also choose to see the speed limit sign on the

map all the time.

4.1.7 Trafﬁc information in route planning

The recommended route is not always the same

between two points. Real-time trafﬁc information can

help you avoid current trafﬁc events like temporary road

closures or a trafﬁc jam caused by an accident. The

function is subject to data availability.

You can display the live trafﬁc information on the map

if you browse the map and select this option from the

More menu. A 2D map is displayed with road segments

coloured by the severity of trafﬁc events. Tap the event

type icon at the road segment and then tap the

button to get information about the trafﬁc event.

4.1.7.1 Real-time trafﬁc information (TMC

TMC (Trafﬁc Message Channel) can provide you with

the real-time status of the trafﬁc. Route calculation can

avoid road blocks or unexpected trafﬁc jams caused by

an accident.

TMC is a speciﬁc application of the FM Radio Data

System (RDS) used for broadcasting real-time trafﬁc

and weather information.

Using trafﬁc information is enabled by default in Clarion

Mobile Map.

Note!

TMC is not a global service. It may not be

available in your country or region. Ask

your local dealer for coverage details.

NX501E/NZ501E contains the TMC receiver that is

needed to receive Trafﬁc events.

If public Trafﬁc data is broadcast at your location,

Clarion Mobile Map automatically takes into account the

trafﬁc events received. You do not need to set anything

in the program. The receiver will automatically search

the FM radio stations for TMC data, and the decoded

information will immediately be used in route planning.

When Clarion Mobile Map receives trafﬁc information

that may affect your route, the program will warn you

that it is recalculating the route, and navigation will

continue with a new route that is optimal considering

the most up-to-date trafﬁc conditions.

To ﬁne-tune this recalculation, you can set the minimum

delay that can trigger a route recalculation, or you can

instruct Clarion Mobile Map to have you conﬁrm the

new recommended route before it takes effect. You can

do these in Trafﬁc settings (page 45).

A special icon (

) is displayed on the Map screen to

show you whether trafﬁc events are received. The icon

shows the status of the trafﬁc receiver when there are

no trafﬁc events on your route, otherwise it shows the

type of the next trafﬁc event on your route.

Road segments affected by trafﬁc events are displayed

with an alternate colour on the map, and small symbols

above the road show the nature of the event:

Clarion_primo_1_1_EU_UserManual_EN-UK.indd 41 2011-2-23 11:24:16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion NZ501E Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion NZ501E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info