Bedienungsanleitung Clarion vrx 633r multimedia (Seite 14 von 42) (Englisch)

166083

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

18 VRX633R

English

Owner’s manual

Turning on/off the loudness

The loudness effect emphasizes the bass and

treble to create a natural sound tone. When you

are listening to music at a low volume, it is rec-

ommended to use the loudness effect.

∗ This function is enabled only when the panel is

open.

1. Press the A-M button ™ for 1 second or longer

to select Loudness ON. The “LD” indicator

lights in the display.

2. Press the A-M button ™ for 1 second or longer

to select Loudness OFF. The “LD” indicator

goes off.

CT (Clock Time) function

The CT function receives CT data sent from an

RDS station and displays the time. Press the

DISP button @ to switch to CT display.

∗ If CT is not being received, “CT--:--” appears in

the display.

Note:

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not be displayed accurately.

Basic Operations

Radio Operations

Listening to the radio

1. Press the FNC button 1 and select the RA-

DIO mode. The frequency or PS is displayed.

∗ PS: Programme service name

2. Press the BND button % and select the radio

band. Each time the button is pressed, the

radio reception band changes in the follow-

ing order:

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW)➜ FM1...

Press the right or left side of the SEARCH but-

ton

to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

DX SEEK can tune in to receivable broadcast

stations; LOCAL SEEK can tune in to only broad-

cast stations with a good reception condition.

1. Press the BND button % and select the de-

sired band. (FM or AM (MW, LW))

2. Tune in to a station.

∗ If “MANU” is lit in the display (or when the panel

is closed, if the indicator “SRCH” is not lit) press

and hold the BND button % for 1 second or

longer. “MANU” in the display goes off (or when

the panel is open the indicator “SRCH” lights)

and seek tuning is now available.

∗ If “TA” is lit in the display, TP stations are auto-

matically sought.

● DX SEEK

Press the right or left side of the SEARCH

button 2 to automatically seek a station.

When the right side of the SEARCH button

2 is pressed, the station is sought in the di-

rection of higher frequencies; when the left

side of the SEARCH button 2 is pressed, the

station is sought in the direction of lower fre-

quencies.

∗ When seek tuning starts, “DX SEEK” appears

in the display.

● LOCAL SEEK

If you press and hold the right or left side of

the SEARCH button 2 for 1 second, local

seek tuning is carried out. Broadcast stations

with good reception condition are selected.

∗ When local seeking starts, “LO SEEK” appears

in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion vrx 633r multimedia Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info