Bedienungsanleitung Clarion vrx 633r multimedia (Seite 19 von 42) (Englisch)

166083

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

VRX633R 23

English

Owner’s manual

CD Changer Operations

CD changer functions

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a to-

tal of 2 changers (MD and/or CD).

Press the FNC button 1 and select the CD

changer mode to start play. If 2 CD changers are

connected, press the FNC button 1 to select the

CD changer for play.

∗ If “NO MAG” appears in the display, insert the

magazine into the CD changer. “LOADING” ap-

pears in the display while the player loads (checks)

the magazine.

∗ If “NO DISC” appears in the display, eject the maga-

zine and insert discs into each slot. Then, reinsert

the magazine back into the CD changer.

CAUTION

CD-ROM discs cannot be played in the CD

changer.

Pausing play

1. Press the PLAY/PAUSE button 3 to pause

play. “PAUSE” appears in the display.

2. To resume play, press the PLAY/PAUSE but-

ton 3 again.

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

Each time you press and hold the DISP button

@ for 1 second or longer, the title display changes

in the following order.

When the panel is closed:

User title (disc) ➜ CD-text title (disc) ➜ CD-text

title (track) ➜ User title (disc)...

When the panel is open:

User title (disc) ➜ CD-text title (disc & track) ➜

User title (disc)...

Note:

• If the CD playing is not a CD-text CD or no user

title has been input, “----------” appears in the dis-

play.

● Scrolling a CD-text title

When a CD-text title is longer than 16 charac-

ters (8 characters when the panel is closed), you

can scroll the display as follows.

Switching the PTY display language

Note:

• This function is enabled only when the panel is

open.

You can select one of 4 languages (English, Ger-

man, Swedish or French) for the PTY displayed

in the display.

∗ The factory default setting is “GB” (English).

1. Press the ADJ button £ to show the adjust-

ment selection display.

2. Operate the JOYSTICK § upward or down-

ward to select "PTY LANG". After that, select

a desired language by operating the JOY-

STICK § rightward or leftward and then press

the ENT at the center of the JOYSTICK § to

change the setting.

“GB”: English

“F”: French

“D”: German

“S”: Swedish

3. Press the ADJ button £. The unit returns to

the previous mode.

Volume setting of TA, emergency

broadcast (ALARM) and PTY

The volume for TA, ALARM and PTY interrupts

can be set during TA, ALARM or PTY interrupt.

∗ The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, operate

the VOLUME button 2 upward or downward

to set the volume to the desired level (00 to 33).

∗ When the TA, ALARM or PTY interrupt ends, the

volume returns to the level it had before the inter-

rupt.

RDS Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion vrx 633r multimedia Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info