Bedienungsanleitung Clarion vrx 633r multimedia (Seite 36 von 42) (Englisch)

166083

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

40 VRX633R

English

Owner’s manual

Connecting other

company’s image equipment

center of the JOYSTICK § to set connection

of the CCD.

RGB type or composite type images from other

company’s equipment can be displayed on this

unit

Be sure to perform this setting after connecting

the RGB type or composite type image equip-

ment to the RGB terminal.

1. When the panel is open, press the ADJ but-

ton £ to show the adjustment selection dis-

play.

2. Operate the JOYSTICK § upward or down-

ward to select “INPUT”. A menu bar is shown

to the right to select the following items:

● “NAVI”: Setting when Clarion NAVI is con-

nected;

● “CCD”: Setting when Clarion CCD camera

is connected to this unit;

● “RGB”: Setting when a RGB image of other

company’s equipment is input;

● “COM”: Setting when a composite image

of other company’s equipment is input.

3. Operate the JOYSTICK § rightward or left-

ward to select “RGB” or “COM”.

● To connect an RGB equipment:

If the image equipment to connect is RGB

type, select “RGB”. Equipment capable to be

connected should have positive polarity sig-

nal of 0.7 V p-p for RGB, and negative polar-

ity signal of 0.3 V p-p for synchronous signal.

●

To connect a composite type equipment:

If the image equipment to connect is a “Com-

posite” type, select “COM”.

∗ These settings cannot be selected when the

DVD changer is connected.

4. Then, press the ENT at the center of the JOY-

STICK § to set the connection.

Display changeover

When the panel is open, it is possible to change

over between AV display and external equipment

display using the NVG/AV button !.

∗ In the external equipment display, those buttons

in the panel (JOYSTICK §, MENU ∞, VIEW

¢, IN £, OUT ™) are disabled.

Monitoring the CCD camera

The CCD camera can be connected to this unit.

For the power supply of the camera, mount the

power box sold separately (CCA-188).

Notes:

• This function is not available when the display is

stored.

• When the TV tuner and CCD camera are to be

connected to this unit, connect the CCD camera

to the CCD input terminal on this unit.

• Refer to the subsection “Sample System 3” in

“9. SAMPLE SYSTEMS” section.

Setting CCD as an external input

equipment

Be sure to perform this setting after connecting

the CCD.

1. When the panel is open, press the ADJ but-

ton £ to show the adjustment selection dis-

play.

2. Operate the JOYSTICK § upward or down-

ward to select “INPUT”. A menu bar is shown

to the right to select the following items:

● “NAVI”: Setting when Clarion NAVI is con-

nected;

● “CCD”: Setting when Clarion CCD camera

is connected to this unit;

● “RGB”: Setting when a RGB image of other

company’s equipment is input;

● “COM”: Setting when a composite image

of other company’s equipment is input.

3. Operate the JOYSTICK § rightward or left-

ward to select “CCD”. Press the ENT at the

CCD Camera

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion vrx 633r multimedia Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info