Bedienungsanleitung Clarion vzn709 (Seite 63 von 82) (Englisch)

162954

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

VZ709

English

Owner’s manual

General Settings

Displaying the General

Settings screen

You can customize the various settings of this

unit from the General Settings screen.

1. Press the [MENU] button.

The Menu screen appears.

2. Touch the [General] key.

The General Settings screen appears.

3. Touch the desired Tab key, and perform the

adjustment.

See the following sections for details.

• In the following sections, only the details

regarding adjustments are described,

procedures to select items are skipped.

4. When the adjustment completes, touch the

[Back] key to return to the previous screen.

Setting Camera Interrupt

When the optional Rear Vision Camera is

connected to this unit, the rear view image is

displayed on the screen when the gear lever is

put in the reverse gear position.

• The factory default setting is “OFF”.

Setting Camera Warning

The following warning message is displayed

during use of the Rear Vision Camera: “Make

sure of safety around your vehicle”.

• The factory default setting is “ON”.

Note:

• This setting is disabled when the Camera Interrupt

feature is set to OFF.

Setting the VTR system

(NTSC/PAL)

• The factory default setting is “NTSC”.

Note:

• This setting is applied only to the AUX video input.

Setting the Auto Panel

When you remove or attach the DCP

(Detachable Control Panel), you can set the

liquid crystal panel automatically housing or

opening.

• The factory default setting is “ON”.

Setting the time of air

conditioner operation mode

(HVAC)

This setting can be used to adjust the time the

panel stays in the horizontal position when in the

air conditioner operation mode.

• The factory default setting is “10 seconds”.

3-1. Touch the [Display] key to display the

Display tab screen.

3-2. Touch the [ON] or [OFF] key of the Camera

Interrupt item to turn the Camera Interrupt

function on or off.

3-1. Touch the [Display] key to display the

Display tab screen.

3-2. Touch the [ON] or [OFF] key of the Camera

Warning item to turn the Camera Warning

function on or off.

3-1. Touch the [Display] key to display the

Display tab screen.

3-2. Touch the [NTSC] or [PAL] key of the

NTSC/PAL item to set the VTR system.

3-1. Touch the [Display] key to display the

Display tab screen.

3-2. Touch the [ON], [OFF], or [Close] key of the

Auto PANEL item to set to “ON”, “OFF”, or

“Close”.

[ON]:

The liquid crystal panel houses

automatically after removing the DCP. And

the liquid crystal panel opens automatically

after attaching the DCP.

[OFF]:

Normal operation.

[Close]:

The liquid crystal panel houses

automatically after removing the DCP.

3-1. Touch the [Display] key to display the

Display tab screen.

3-2. Touch the [C] key to display the next screen.

3-3. Touch the [5s], [10s], or [30s] key of the

HVAC item to set the time to “5 seconds”,

“10 seconds”, or “30 seconds”.

280QC6832BA-VZ709_EN.book Page 61 Monday, January 5, 2009 5:48 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion vzn709 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info