Bedienungsanleitung Clarion WXZ468RMP (Seite 24 von 41) (Englisch)

63180

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

24 WXZ468RMP

280-8262-00

English

Entering MESSAGE INFORMATION

When “ON” is selected for the screen saver set-

ting, you can change the contents of the mes-

sage.

∗ Up to 30 characters can be entered.

∗ The factory default setting is “Welcome to

Clarion”.

1. Press and hold the [DISP] button for 1 sec-

ond or longer to switch to the display adjust

mode.

2. Turn the [SEARCH] knob to select

“MSG INPUT”.

3. Press the [SEARCH] knob.

4. Turn the [SEARCH] knob to move the cursor.

5. Press the [BAND] button to select a

character. Each time you press the [BAND]

button, the character changes in the

following orders:

Capital letters ➜ Small letters ➜ Numbers

and Symbols ➜ Umlaut ➜ Capital letters…

6. Turn the [A-MODE] knob to select the de-

sired character.

7. Repeat steps 4 to 6 to enter up to 30 charac-

ters for message.

8. Press and hold the [SEARCH] knob for 2

seconds or longer to store the message in

memory and return to the display adjust

mode.

∗ Press and hold the [BAND] button for 1

second or longer to delete the message. Then

press and hold the [SEARCH] knob for 2

seconds or longer to return the message to

the default setting.

9. Press the [DISP] button to return to the previ-

ous mode.

Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA TITLE.

∗ The factory default setting is “ON”.

1. Press and hold the [DISP] button for 1 sec-

ond or longer to switch to the display adjust

mode.

2. Turn the [SEARCH] knob to select “AUTO

SCROLL”.

Display Adjust Mode

Setting the sensitivity of the

spectrum analyzer display

∗ The factory default setting is “MID”.

1. Press and hold the [DISP] button for 1 sec-

ond or longer to switch to the display adjust

mode.

2. Turn the [SEARCH] knob to select “S/A

SENSE”.

3. Turn the [A-MODE] knob to select from

“LOW”, “MID” or “HIGH”.

4. Press the [DISP] button to return to the previ-

ous mode.

Setting the speed of the spectrum

analyzer display

∗ The factory default setting is “MID”.

1. Press and hold the [DISP] button for 1 sec-

ond or longer to switch to the display adjust

mode.

2. Turn the [SEARCH] knob to select “S/A

SPEED”.

3. Turn the [A-MODE] knob to select from

“LOW”, “MID” or “HIGH”.

4. Press the [DISP] button to return to the previ-

ous mode.

Turning the screen saver function

on or off

If the screen savers are not desired, they can be

turned off.

If the button operation is performed with the

screen saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “ON”.

1. Press and hold the [DISP] button for 1 sec-

ond or longer to switch to the display adjust

mode.

2. Turn the [SEARCH] knob to select “SCRN

SVR”.

3. Turn the [A-MODE] knob to select “ON” or

“OFF”.

4. Press the [DISP] button to return to the previ-

ous mode.

Common Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion WXZ468RMP Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion WXZ468RMP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info