Bedienungsanleitung Clarion XMD2 (Seite 7 von 16) (Englisch)

580435

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

XMD1/XMD2

Radio Mode Operations

FM Reception

For enhanced FM performance the

tuner includes sig-

nal actuated stereo control and Multipath noise reduction circuits.

Listening to the Radio

1) Press the FUNC button 4 to select the radio mode, then the ra-

dio will be on.

2) To select a preset band, press the “BAND” button $,then select

one of the preset bands such as FM1, FM2, FM3, or AM. Every

time the “BAND” button $ is pressed, the display will change as:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1

3) Press the SRCH Left/Right button @, then the station at which

there is a broadcast will be selected (Seek selection).

Mute

Use this function to turn off the sound immediately.

Press the MUTE button !. The sound turns off and “MUTE” ap-

pears on the display. Press the MUTE button again to cancel the

mute mode.

Manual Tuning

1) Press the “BAND” button $, then select FM1, FM2, FM3 or AM.

2) Press and hold the “BAND” button $ for 2 seconds or longer,

then the display will show “MANU”, which means that a manual

selection function is on.

3) Press the SRCH Left/Right button @ and select the right station.

Seek Tuning

1) Press the “BAND” button $, then select FM1, FM2, FM3 or AM.

2) If the “MANU” on the display is on, press and hold the “BAND”

button $ for 2 seconds or longer. When the “MANU” display is

off, the Seek Selection function is on.

3) Press the SRCH Left/Right button @, then when it selects the

station in which there is a broadcast, it automatically stops.

Preset Memory Function

Preset Memory Function can store up to 24 stations: six stations for

each of FM1, FM2, FM3 and AM.

Note:

• When the present memory function is used, all the content of the

memory will be erased.

Manual memory function

1) Press the “BAND” button $, and select the band you want to

store in the memory.

2) Press the SRCH Left/Right button @ then select the station you

want to store in the memory.

3) Press and hold the Preset button 5 for 2 seconds or longer, then

the station will be stored in the memory.

Auto store function (Automatic Station Store)

1) Press the “BAND” button $, then select the band you want to

store in the memory.

2) Press and hold the AS button 6 for 2 seconds or longer, then the

station at which the reception is the strongest will be automati-

cally stored in the memory.

Note:

• When the number of stations stored is less than six, the previous

content of the memory for each direct button will be retained.

Preset Scanning (Preset Station Scan)

When the PS button 6 is pressed, the preset memory numbers

flash and the stations are tuned in for 7 seconds each in the order in

which they were stored. Press the PS button again to cancel the

preset scanning mode.

Instant Station Recall (ISR)

With this function, a specific radio station can be recalled from any

mode.

ISR memory

1) Press the FUNC button 4, then select the radio mode.

2) Select the radio station which you want to store in the memory.

3) Press and hold the ISR button ¥ for 2 seconds or longer.

Recalling ISR

Press the ISR button ¥ then the display will show “ISR”, then the

radio station previously memorized will be selected. Press the ISR

button ¥ again to disengage the unit from the Recalling ISR func-

tion.

Area Change

Use this function when you are using the boat stereo anywhere out-

side the U.S.

Switchable frequency spacing

This boat stereo is initially set to tune in frequency intervals of 10

kHz for AM and 200 kHz for FM, the standard calibrations in the U.S.

When using the unit outside the U.S., use the following procedure to

switch the frequency range.

The table below lists the frequency specifications for the U.S. and

other countries.

Switching the area change Outside U.S. (New Setting)

While pressing the “BAND” button $, press the SRCH Left button

@, then “outside U.S.” will be selected.

Inside U.S. standard (Initial Setting)

While pressing the “BAND” button $, press the SRCH Right button

@, then the “U.S. standard” will be selected.

87.5 to

108 MHz

Frequency

spacing

Frequency

range

Frequency

spacing

Frequency

range

Initial Setting

(U.S. standard)

New Setting

(outside U.S.)

10 kHz

530 to

1,710 kHz

200 kHz

87.9 to

107.9 MHz

9 kHz

531 to

1,629 kHz

50 kHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion XMD2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info