Bedienungsanleitung Clarion xmd3 (Seite 11 von 22) (Englisch)

163741

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

English

XMD3

Basic Operations

Adjusting the subwoofer

When you default select one of mode (LPF50, LPF80, LPF120)

∗ The factory default setting is “S-VOL 0”. (Adjustment range: -6 to +6)

1. Press the [ A-M ] button and select “S-VOL 0”.

2. Press the [ w ] or [ z ] button increases or deceases the

subwoofer volume.

Press and hold the [ w ] or [ z ] button automatically in-

creases or deceases the subwoofer volume.

3. When the adjustment is complete, press the [ A-M ] button

several times until the function mode is reached.

Adjusting the bass (Gain, Frequency, Q-curve)

This adjustment can be performed when the Z-Enhancer Plus is

set to “CUSTOM”.

1. Press the [ A-M ] button and select “BASS”.

2. Press the [ w ] button emphasizes the bass.

Press the [ z ] button attenuates the bass.

∗ The factory default setting is “B<G 0>”. (Adjustment range: –6 to

+6)

3. Press the [ d ] or [ a ] button to select “B<F 60>”.

Press the [ w ] or [ z ] button to select the frequency.

∗ The factory default setting is “B<F 60>”.(Adjustment 60/100/200

Hz)

4. Press the [ d ] or [ a ] button to select “B<Q 1>”.

Press the [ w ] or [ z ] button to select the Q-curve.

∗ The factory default setting is “B<Q 1>”.(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the [ A-M ] button

several times until the function mode is reached.

Adjusting the treble (Gain, Frequency)

This adjustment can be performed when the Z-Enhancer Plus is

set to “CUSTOM”.

1. Press the [ A-M ] button and select “TREBLE”.

2. Press the [ w ] button emphasizes the treble.

Press the [ z ] button attenuates the treble.

∗ The factory default setting is “T<G 0>”. (Adjustment range: –6 to

+6)

3. Press the [ d ] or [ a ] button to select “T<F 10>”.

Press the [ w ] or [ z ] button to select the frequency.

∗ The factory default setting is “T<F 10>”.(Adjustment 10 kHz/15

kHz)

4. When the adjustment is complete, press the [ A-M ] button

several times until the function mode is reached.

Adjusting the balance

1. Press the [ A-M ] button and select “BAL 0”.

2. Press the [ w ] button emphasizes the sound from the right

speaker, press the [ z ] button emphasizes the sound from the

left speaker.

∗ The factory default setting is “BAL 0”. (Adjustment range: L13 to

R13)

3. When the adjustment is complete, press the [ A-M ] button

several times until the function mode is reached.

Adjusting the fader

1. Press the [ A-M ] button and select “FAD 0”.

2. Press the [ w ] button emphasizes the sound from the front

speaker, press the [ z ] button emphasizes the sound from the

rear speaker.

∗ The factory default setting is “FAD 0”. (Adjustment range: F12 to

R12)

3. When the adjustment is complete, press the [ A-M ] button

several times until the function mode is reached.

Adjusting the Z-Enhancer Plus

1. Press the [ Z+ ] button and select the Z-Enhancer Plus mode to

adjust.

2. Press the [ A-M ] button and press the [ w ] button adjusts in

the + direction; press the [ z ] button adjusts in the - direction.

● When “B-BST 0” is selected, you can adjust the bass in the

range of -3 to 3.

● When “IMPACT 0” is selected, you can adjust the bass and

treble in the range of -3 to 3.

● When “EXCITE 0” is selected, you can adjust the bass and

treble in the range of -3 to 3.

∗ Press and hold the [ Z+ ] button for 2 seconds or longer to change

to the “CUSTOM” mode.

Bass/treble characteristics become flat and the indication

“Z+FLAT” is shown in the display.

Press the [ Z+ ] button again to change to the “Z+ OFF” mode.

Turning on/off MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area

like the normal sound adjustment function, but emphasizes the

deep bass sound area to provide you with a dynamic sound.

∗ The factory default setting is off.

1. Press and hold the [ A-M ] button for 1 second or longer to turn

on the MAGNA BASS EXTEND effect. “M-B EX” lights in the

display.

2. Press and hold the [ A-M ] button for 1 second or longer to turn

off the MAGNA BASS EXTEND effect. “M-B EX” goes off from

the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion xmd3 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info