Bedienungsanleitung Clas Ohlson EF700ET - 32-8934 (Seite 2 von 10) (Deutsch, Englisch, Schwedisch, Norwegisch, Finnisch)

606993

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

English

GREAT BRITAIN • customer service

tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

Ver. 20131212

Battery change

If thedigits in thedisplay disappear when thetimer is removed

from thepower point, thebatteries need to be changed. Remove

thedisplay according to Connection point 3 below. The battery

compartment is on theback of thedisplay. Change the2 batteries

to new ones of SR69 type.

Connection

1. Programme in thedesired ON/OFF times in thetimer as

explained above.

2. Remove thefuse from thepower point. Make sure there is

no power.

3. Disassemble thetime switch: Loosen thescrew (A) and

insert ascrewdriver at (B) and carefully bend.

4. Connect thecables to thetime switch according to ﬁg. 3.

5. Mount thetime switch in thesocket moulding, and tighten. (Fig 4)

6. Mount theinner cover plate (ﬁg. 5) with thescrews.

7. Fasten theexternal cover on inner cover plate.

8. Replace thefuse and test.

Specifications

Rated Voltage 230 V AC, 50 Hz

Max load 500 W or 3.15 A (resistive)

Batteries 2×1.5 V (SR69, V371)

5. Use [ ▼ ] to move backwards in reverse order, press [ SET ]

to save thesettings when thecorrect day is shown.

6. The hour digit will now start to ﬂash, select thecorrect hour

using theup/down arrows [ ▲ ] and [ ▼ ], press [ SET ] to

save thesetting when thecorrect hour is shown on thedisplay.

7. The minute digits will start to ﬂash, select thecorrect minute

using theup/down arrows [ ▲ ] and [ ▼ ], press [ SET ] to

save thesetting when thecorrect time is shown on thedisplay.

8. Other programmes can be set or set programmes can be

changed by: repeating steps 2 to 7 described above.

Manual Function

NOTE: The symbol appears in thedisplay when thetime switch is

activated in either theon or off mode according to theprogramme:

• Press [ RCL ] and hold until thesymbol disappears, in order

to override thepre-programmed settings and control

the ON/OFF activation manually.

• Press [ RCL ] one more time in order to return to

the pre-programmed settings. The icon will reappear.

• The display automatically returns to displaying thetime

if no button is pushed within 15 seconds.

Countdown function

1. Press [ P ] when ”CLOCK” is shown on thedisplay until

the ”CD” symbol appears.

2. Press [ SET ] in order to begin programming. The hour display

begins to ﬂash.

3. Select thecorrect hour using theup/down arrows [ ▲ ] and

[ ▼ ], press [ SET ] to save thesetting when thecorrect hour

is shown on thedisplay.

4. The minute digits will start to ﬂash, select thecorrect minute

using theup/down arrows [ ▲ ] and [ ▼ ], press [ SET ] to save

thesettings. The countdown function can be set from 1 min.

up to 99 hrs. and 59 min.

5. The display must be in CD mode in order to start

the countdown function. Push [ ON/OFF ] in order to start.

”CD” ﬂashes as areminder that acountdown is in progress

when thedisplay is in theCLOCK mode.

6. Press [ ON/OFF ] in order to stop acoundown (this only

works when ”CLOCK” shows on thedisplay.)

7. When thecountdown programme is active it is themain

programme. Even if there are other programme settings,

the countdown will continue for its set time and

subsequently turn off thepower.

Random function

1. Press [ P ] when ”CLOCK” is shown on thedisplay until

the ”RND” symbol appears.

2. Press [ ON/OFF ] in order to start/stop therandom function.

3. ”RND” ﬂashes to when therandom function is active when

”CLOCK” is shown on thedisplay.

Example:

The set time is 06:00

(on) and 18:00 (off). When theran-

dom function is activated, thepower will be turned on approx.

16–24 minutes after 06:00 and is turned off approx. 24–42 minutes

before 18:00.

Other functions

Manual to/from operation

• Press once on thecover to turn on thepower.

is shown in

thedisplay. If

is also shown in thedisplay, this means that

thepre-programmed setting will dictate when thepower will

be shut off.

• Press once on thecover to turn on thepower. is shown

in thedisplay. If

is also shown in thedisplay, this means

that thepre-programmed setting will dictate when thepower

will be shut off.

Daylight Savings Time

• Press theup/down arrows simultaneously [ ▲ ] and [ ▼ ] in

order to transition to Daylight Savings Time when ”CLOCK”

is shown on thedisplay. The time and theprogrammed

setting are now synchronised to Daylight Savings Time.

”S” now shows on thedisplay.

• Press theup/down arrows simultaneously [ ▲ ] and [ ▼ ]

in order to transition to standard time when ”CLOCK” is

shown on thedisplay. The time and theprogrammed

setting are now synchronised to standard time.

Reset

• Press [ R ] once in order to clear all programmed settings.

12/24 hour display

• When you have changed batteries or have pressed [ R ]

the 24 H will begin to ﬂash, change to a12 hour clock

display by pressing [ ▲ ] or press [ ▼ ] to return to a24 hour

display. Conﬁrm by pressing [ SET ].

Fig. 1.

Fig. 2.

Fig. 3.

Fig. 4.

Fig. 5.

Clas Ohlson EF700ET - 32-8934 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info