551761
48
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
been switched on, the radio continuously tests the signal strength of the AF fre-
quency.The test interval for each AF frequency depends on the signal strength of
the current station and varies from a few minutes in the case of a strong signal to
a few seconds in the case of weak signals. Whenever the new AF frequency is
stronger than the station that is currently tuned in, the radio switches to this fre-
quency for a short time and the message "NEW FREQUENCY" is displayed for
one to two seconds. As the mute time during the frequency change and the test
time is very short, this is almost inaudible during the normal programme.
The AF function is activated by briefly pressing the AF button and the status
of the AF function is shown in the display by an AF symbol.
If the AF symbol appears in the display, the AF function is switched on
and RDS transmission data is being received.
If the AF symbol flashes in the display, the AF function is selected but
no RDS signal can be received at the moment.
Press the AF button again to switch off this function. The AF symbol in
the display goes off.
b) REG Function
At certain times some stations divide up their programmes into regional pro-
grammes with varying content.
REG ON: If the AF button is pressed for a longer time the regional mode
is switched on. The message "REG ON" appears in the display for a few
seconds.
Note: The display capacity is limited. It is possible that in the double dis-
play mode some segments of the display are deleted.
The function REG ON prevents the radio from switching to alternative
frequencies which have a different regional programme content.
REG OFF: Pressing the AF button again for a longer time switches off
the regional mode. The message "REG OFF" appears in the display for
a few seconds.
The programme identification (PI) of the regional programme is ignored
during the search for an alternative frequency (AF) or a programme
identification (PI).
22
CD Slit
23 Eject Button (EJECT)
Press this button to eject the CD.
24
Flashing LED
When the front control panel is removed this display flashes.
25
RESET Button
Press this button to reset the programme on which there is interference.
48
GB
5....-05-AR 557 CD_3 14.10.2003 9:53 Uhr Seite 48
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clatronic AR 557 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info