Bedienungsanleitung Clatronic AR 737 (Seite 28 von 36) (Deutsch, Englisch)

551760

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Changing the default settings

A large number of default settings can be comfortably changed

via the screen menu.

Press the SETUP-button (Fig. 1/25) on the remote control to

start the menu for changing the default settings (only in DVD

mode).

ޥ NOTE:

• Many of these default settings can be changed via both

the remote control and the menu. The difference is: If you

change the default settings via the remote control, these

changes will only be valid until the DVD-Player is switched

off or the DVD is changed.

• However, any changes made in the menu are permanent.

Understanding the menu structure

The Setup menu has two menu levels:

• Main menu: The main level is represented by graphical

symbols.

• Sub-menu: The corresponding sub-menu options can be

found under each of the main menu options.

Using the menu

Navigation and selection

• Use the Cursor Buttons (Fig. 1/14) (

) on the remote

control to browse through the main menu.

• In contrast to this, you must use the Cursor Buttons (

) to move in the sub-menu.

• Select a menu option with the ENTER-button (Fig. 1/27).

• Use the ENTER-button also to select an option (e.g. “PAL”

in the illustration on the top). The selected option (in the

example „NTSC”) is now highlighted.

Slide control

In some menus you will ﬁ nd slide controls. The slide control is

used as follows:

1. Select with the ENTER-button.

2. Move the control with the Cursor Buttons (

3. Conﬁ rm the entry with the ENTER-button.

Overview of the main menu

• General Settings (1)

• Speaker Settings (2)

• Digital Settings (3)

• Preferred Settings (4)

ޥ NOTE:

Some of the menu settings can only be selected in stop mode

(depending on the DVD).

TV Display

Here you can adapt the output of the DVD-Player to the TV-aspect.

Concerning the background: If you do not have a wide screen

TV the TV-aspect will be 4:3. However, most feature ﬁ lms

have an aspect of 16:9, the image is therefore too wide for the

TV-screen.

Here you can specify how the replay of the ﬁ lm is to be adapted

to the replay device:

• Norm/PS: You will only see the middle section of the ﬁ lm.

The borders will be cut off („Pan-Scan“).

• Norm/LB: You will see the complete width of the ﬁ lm. The

ﬁ lm is thus reduced in size, whereby black bars appear

below and above the ﬁ lm („Letter-Box“).

• Wide: Select this option if you use a wide screen TV for

replay. Please note that ﬁ lms, that have been recorded with

TV-aspect 4:3 can still be replayed using aspect 4:3. This

means, that replaying this ﬁ lm will not require the complete

wide screen area of the television.

General Settings

Angle Mark (Camera Angle)

If the DVD contains sequences recorded from different camera

angles you can use the ANGLE button (illustration 1/15) to

select the various camera angles. This function is only available

if the DVD contains scenes with various camera angles.

Before you can use this function it has to be activated.

• On: The angle symbol is shown on the screen.

• Off: No angle symbol is shown on the screen.

05-AR 737 DVD_GB 28 21.08.2006, 11:50:07 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic AR 737 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info