Bedienungsanleitung Clatronic BS 1273 (Seite 33 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

77747

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

ENGLISH

Cable winding device

Pull out the cable up to the maximum length indicated with the

yellow mark. Never pull the cable out up to the red mark as the

cable winding can be damaged. Said damages are not covered

by the warranty.

Winding

Press the cable winding button and guide the cable. Hold the

cable to avoid wrapping.

Telescope Vacuum Pipe

The height-adjustable vacuum pipe

enables individual alignment to your

height.

Unlock the coupling by pressing the key

in the direction of the arrow.

Slide the vacuum pipe to the desired

length. To lock the device, release the

key until you hear it lock in place.

Nozzle accessories

Groove and brush

nozzle:

For vacuuming upholstery, curtains and

in corners and crevices etc.

Upholstery nozzle: For cleaning upholstery, curtains etc.

Floor nozzle: To clean carpets or smooth surfaces.

Smooth ﬂ oors:

Press down the lever with the brush

symbol „ “ with your foot.

The brush is now visible..

Carpets:

Move the lever with your foot to the

„

“symbol.

Parquet brush: The ﬂ oor nozzle is ﬁ tted with rollers for

improved manoeuvrability. For large

areas such as parquet, laminate or

tiles etc.

Turbo brush: The ﬂ oor nozzle is ﬁ tted with rollers for

improved manoeuvrability. The brush is

equipped with a rotating and swivelling

brush roller driven by the air current.

Removes ground-in dirt, animal hairs,

threads and ﬂ uff particularly thoroughly.

The carpet pile is brushed up to look

almost new.

Move the switch on the brush to Sym-

bol A in order to increase the quantity

of suction air. In the case of symbol

(B) this is correspondingly less. This

increases the suction power.

Please note that the turbo brush is

not suitable for smooth ﬂ oors, e.g.

parquet, laminate etc. as the surface

might be damaged.

Releasing the nozzles: Pull these off while turning slightly.

Air Slide

Open the air slide on the hose handle in order to regulate the

airﬂ ow or to clear any particles sticking to the nozzle.

Filter

Your machine has three ﬁ lter systems. The traditional dust bag

system has been replaced by a transparent dust container. In

this, coarse dirt particles and tiny particles ﬂ oating in the air are

swirled out of the suction air by the high speed of the air current.

It is therefore unnecessary to buy dust bags.

Once the dust level has reached the MAX mark on the dust con-

tainer, or the suction power of the vacuum cleaner is reduced,

please proceed as follows:

Ill. 1

Emptying the Dust Container

• Press the button to release the

dust container and remove it

from the vacuum cleaner.

Ill. 2 • Pull the ﬁ lter insert out care-

fully by the two retainers. Move

the dust container to a vertical

position if necessary.

• Empty the contents of the dust

container. Then put the ﬁ lter

insert back in position. Please

ensure that the ﬁ lter insert is

reinstalled ﬁ rmly in an upright

position.

Attach the dust container again

by locking it in position.

Ill. 3

1. Motor Protective Filter

(in the Dust Container)

Cleaning the Filter Element

• Press the button to release

the dust container and then

remove it (see illustration 1).

• Empty the contents of the

dust container (see Illustration

2). Unlock the ﬁ lter insert by

turning it a short distance in

a clockwise direction (see

Illustration 3). In the second

step the ﬁ lter insert can be

pulled out towards the bottom.

Clean the motor protection ﬁ lter

by tapping and gently brushing

out.

• Now replace the components.

• Attach the dust container again

by locking it in position.

05-BS 1273.indd 3305-BS 1273.indd 33 07.03.2008 8:24:45 Uhr07.03.2008 8:24:45 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic BS 1273 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info