Bedienungsanleitung Clatronic bs 1274 (Seite 24 von 42) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Norwegisch)

320798

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ENGLISH

Using the Appliance

1. Unwind the length of cable you require.

CAUTION:

• Pull out the cable up to the maximum length indicated

with the yellow mark.

• Never pull the cable out up to the red mark as the

cable winding can be damaged.

ޥ NOTE:

If the red mark is visible, pull in the cable with the help of

the cable winding button back to the yellow mark.

2. Insert the mains plug into a correctly installed 230 V, 50 Hz

power socket. Switch the device on by the on/off switch.

3. Set the “carpet/hard ﬂ oor” switch, depending on the ﬂ oor

covering.

4. Set the vacuum power with the vacuum power regulator

(

(Min) to

(Max)).

5. Vacuum at a steady speed. There is no need to exert pres-

sure.

ޥ NOTE:

Pay attention to the range that can be covered with the cable

length!

Vacuum power regulator

Low vacuum power: For curtains and delicate fabrics.

Medium vacuum power: For long-pile velour carpets and textile

ﬂ ooring.

High vacuum power: For sturdy rugs and ﬂ oors.

Air Slide

Open the air slide on the hose handle in order to

regulate the airﬂ ow or to clear any particles sticking

to the nozzle.

Switching off and Winding up the Mains Lead

1. Turn the vacuum cleaner off by the on/off switch and remove

the plug from the socket.

2. Keep the plug in your hand.

3. Press the cable winding button and guide the cable. Hold

the cable to avoid wrapping.

Nozzle Attachment

Crevice and

jointed nozzle: For vacuuming upholstery, curtains and in

corners and crevices etc.

ޥ NOTE: „2-in-1“ nozzle:

When this is folded together it can be

used as a groove nozzle. If you would like

to use the brush nozzle, pull the brush

section in the direction of the arrow until it

locks in place.

Upholstery nozzle: For cleaning upholstery, curtains etc.

Floor nozzle: To clean carpets or smooth surfaces.

Smooth ﬂ oors: Press down the lever with

the brush symbol with your

foot. The brush is now vis-

ible.

Carpets: Press the lever In the oppo-

site direction. The brushes

are now retracted.

The ﬂ oor nozzle is ﬁ tted with rollers for

improved manoeuvrability.

Parquet brush: For large areas such as parquet, laminate

or tiles etc.

Releasing

the nozzles: Pull these off while turning slightly.

Maintenance

Dust bag replacement display (4)

Hold the hose up into air. If the display for changing the dust bag

appears, the bag is full. Please change it.

Changing the dust bag

• Pull the plug out of the socket.

• Open the lid of the dust bag compartment by the handle

(11).

• Remove the bag by pulling the retainer carefully upwards so

that you have easier access to the bag. Then remove the

dust bag by pulling it upwards.

• Insert a new bag. Please ensure that the bag is located

correctly in the guide mechanism. Then reinsert the retainer.

Close the cover so that it snaps into place.

Filter

Your appliance has two ﬁ lters.

Motor protection ﬁ lter (inlet ﬁ lter) (16)

The inlet ﬁ lter is located in the dust bag compartment. The

ﬁ lter is located vertically in the rear section of the dust housing.

Remove the ﬁ lter by pulling upwards.

Cleaning the Filter Element

Clean the engine protection ﬁ lter after 10 dust bag changes. If

necessary, the ﬁ lter can also be washed in warm water without

any additives. Place it back into place only once it is completely

dry!

Outlet ﬁ lter

The appliance is also equipped with an outlet ﬁ lter. This ﬁ lter is

to be found under the ﬁ lter cover (14).

• Press down the lever above the ventilation grille in order to

open the ﬁ lter cover.

• Then pull the grille out towards the front. Remove the ﬁ lter

and clean as described above. Please re-insert the ﬁ lter cor-

rectly and close the ventilation grille (until it clicks in place).

05-BS 1274.indd 2405-BS 1274.indd 24 04.02.2009 10:18:33 Uhr04.02.2009 10:18:33 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic bs 1274 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info