Bedienungsanleitung Clatronic BS 1308 (Seite 31 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

814281

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

BS1308_IM 01.08.17

• Do not use the appliance in damp rooms!

• Never use without the lter. Check that the lter is inserted correctly!

• Keep hair, clothing and body parts away from the vacuum nozzle

during use!

• Keep the vacuum cleaner away from sources of heat like radiators,

ovens, etc.!

Overview of the Components /

Scope of Delivery

1 Suction hose

2 Telescopic suction tube

3 Connection head of the suction hose

4 Hose connection

5 Dust collector with lter insert

6 Carrying handle

7 Release button for dust collector

8 Cable-winding button

9 On / off switch

10 Lever for opening the ventilation grille (with output lter)

11 Parking aid

12 Dust collector base plate

13 Lever for extending and retracting the brushes

14 Floor nozzle (with hook (not shown))

Accessories not shown:

Groove and brush nozzle

Start-up

• Insert the connection head of the suction hose into the

hose connection of the appliance. Tighten the connection

header anticlockwise.

• To release the hose again, turn the connecting header

clockwise.

• Insert the suction tube into the handle if required.

• You can use the sliding switch on the telescopic suction

tube to adjust the length individually.

• Assemble the oor nozzle and / or the accessories.

Nozzle Attachment

Floor nozzle (14)

The oor nozzle is tted with rollers for easier guiding.

You can clean smooth surfaces and carpets with the oor

nozzle.

• Adjust the brushes outwards or inwards using the lever

(13)

Best use of the appliance depends on the texture of the oor

covering. We recommend the following use:

• Use without brushes:

For vacuuming oor coverings with a deep pile

• Use with brushes:

For vacuuming smooth oors and carpets with a shallow

pile

Groove and brush nozzle

For vacuuming upholstery, curtains and in corners and

crevices etc.

NOTE: “2-in-1” nozzle:

When this is folded together it can be used as a groove

nozzle. If you would like to use the brush nozzle, pull the

brush section in the direction of the arrow until it locks in

place.

To detach the nozzle attachments from the suction pipe, pull

them off by turning them slightly.

Using the Appliance

1. Unwind the length of cable you require.

CAUTION:

• Pull out the cable up to the maximum length indi-

cated with the yellow mark.

• Never pull the cable out up to the red mark as the

cable winding can be damaged.

NOTE:

If the red mark is visible, pull in the cable with the help

of the cable winding button back to the yellow mark.

2. Insert the mains plug into a correctly installed power

socket.

3. Turn the appliance on by the on / off switch by pressing

down the button.

4. Set the “carpet / hard oor” switch, depending on the oor

covering.

5. Vacuum at a steady speed. There is no need to exert

pressure.

NOTE:

Pay attention to the range that can be covered with the

cable length!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic BS 1308 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info