Bedienungsanleitung Clatronic ctv 652 st vt (Seite 25 von 26) (Deutsch, Englisch)

150203

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

2528

Individual setting of programmes

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

PROGRAM 06

VOLUME +1

BRIGHTNESS −2

ASPECT RATIO 4:3

SYSTEM AUTO

STANDARD AUTO

FINE TUNING 575,19 MHz

AFC ON

STORE

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear on the screen.

2. Using RC buttons

∧∧

∧

∨∨

∨

select the line PROGRAM TUNE and

push RC button

< or >. The table PROGRAM TUNE will appear

on the screen.

3. Using RC buttons

<, >, 0, 1, ..., 9 select the programme, for which

you want to perform the individual settings.

The correction of sound.

4. Sometimes the sound level of various programmes is different. This

function lets you to correct the sound for every programme individually,

and you wouldn’t need to correct volume when switching the

programmes.

Using RC buttons

∧∧

∧

∨∨

∨

select the line VOLUME. Pushing RC button

< or > you can change the sound’s level from -7 to +7.

The correction of the picture lightness.

5. Sometimes the picture brightness of various programmes is

different. This function lets you to correct the brightness for every

programme individually, and you wouldn’t need to correct brightness,

when switching the programmes.

Using RC buttons

∧∧

∧

∨∨

∨

select the line BRIGHTNESS. Pushing RC

button

< or > you can change the level of brightness from -7 till +7.

Format.

6. Using RC buttons

∧∧

∧

∨∨

∨

select the line ASPECT RATIO. Pushing RC button < or > you can select

the picture format: 4:3 (it is usual format for most television stations) or 16:9 (DVD movies format).

System.

7. Using RC buttons

∧∧

∧

∨∨

∨

select the line SYSTEM. Push RC button < or > and you can select the colours

system: AUTO, SECAM and PAL. The recommendation is to leave AUTO system. To select the

concrete system can be useful unless the identification of colours is unstable for bad quality of signal.

Standard.

8. Using RC buttons

∧∧

∧

∨∨

∨

select the line STANDARD. Push RC button < or > and select the standard

of sound: AUTO, BG, DK, I. The recommendation is to leave AUTO. If you select wrong standard of

sound, the sound will be gone.

Fine tuning.

9. If depending on bad air conditions or other reasons, the view quality is bad, you can get better results

using the fine tuning.

Using RC buttons

∧∧

∧

∨∨

∨

select the line FINE TUNING. Push RC button < or > and try to get better results

using the fine tuning. When you will finish the tuning, your TV automatically will be back to the previous

table.

Automatic readjustment of frequency.

10. Using RC buttons

∧∧

∧

∨∨

∨

select the line AFC. Using RC button < or > you can turn on (ON) or turn

off (OFF) the automatic readjustment of frequency. Turned on this function, the television automatically

seeks the frequency of transmitter.

11. You have to write the parameters in to memory. Using RC buttons

∧∧

∧

∨∨

∨

select the line STORE. Push

RC button

< or >. You will see the blue bar. It means that everything was written successfully in the

memory.

12. If you want to perform the same operation with other programs, using RC buttons

∧∧

∧

∨∨

∨

select the

line PROGRAMM and repeat this procedure, like it is written in the 3-11 steps.

13. If you want to leave the MENU tables, push the RC button OK twice.

Review of tuning programmes

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

VIEW

01 TV3 11

02 TV4 12

03 13

04 14

05 15

All tuned programmes you can review in the table VIEW.

1. Push the RC button OK and keep it about 2 seconds, until the MENU

table will appear on the screen.

2. Using RC buttons

∧∧

∧

∨∨

∨

, select the line VIEW.

3. Push RC button

< or >. The table VIEW will appear on the screen.

4. Using RC buttons

∧∧

∧

∨∨

∨

(in the column), or using RC buttons < or

> (in the row) you can switch the TV to any programme which is in

the list. The programme will turn on approximately after 1 second.

5. If you want to leave the MENU tables, push the RC button OK twice.

Notes:

1. You can go directly to the table VIEW, if you push the yellow RC

button.

2. The hidden programmes are marked in red colour.

9. You have to write the parameters into memory. Using RC buttons

∧∧

∧

∨∨

∨

select the line STORE. Push

RC button

< or >. You will see the green bar. It means that everything was written successfully in

the memory.

10. If you want to leave the MENU tables, push the RC button OK twice.

Notes: 1. You can go directly to the table PICTURE, if you push the green RC button.

2. The fixed picture parameters you can select directly by RC button PP.

The line HUE can only be selected, if you have chosen the system NTSC.

Special functions

SOUND

PICTURE

VIEW

CLOCK

AUTOSEARCH

MANUAL SEARCH

EDIT

OPTIONS

PROGRAM TUNE

1. Push the RC button OK and keep it about 2 seconds, while the MENU

table will appear on the screen.

2. Using RC buttons

∧∧

∧

∨∨

∨

, select the line OPTIONS.

3. Push RC button

< or >. The table OPTIONS will appear on the

screen.

Languages.

4. Push RC button

< or > and select the proper language for control

graphic.

Program number.

5. Using RC buttons

∧∧

∧

∨∨

∨

, select the line PROGRAM NUMBER.

Clatronic ctv 652 st vt Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info