Bedienungsanleitung Clatronic CTV 719 (Seite 25 von 40) (Deutsch, Englisch)

551877

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

19 N/P (Video Output Signal)

With this button you can switch the colour system of

the video output signal between PAL and NTSC.

Note: If you choose a colour system that is not sup-

ported, you will not receive any colour.

20 MODE

Each time this button is pressed the analogue values

are called up, which you can then adjust with the

VOL+ / VOL- buttons.

21 SUBTITLE

With this button you can activate the DVB subtitles

provided that they are transmitted by the station.

5. Basic Operation

Basic Interface Connexion

5.1 Connexion to the Mains

with the Alternating Current Adapter

Connect the electric plug of the alternating current

adapter to the socket marked

„DC IN 9V“ on the set

and then insert the mains plug of the alternating

current adapter into a properly installed 230 V/50 Hz

wall socket.

Cautions:

• The included AC power supply cord and AC adap-

tor are for use with this unit only. Do not use them

with other equipment.

• When the unit ist not going tobe used for a long

time, disconnect the AC power supply cord from

the AV outlet.

• Use this unit only with a 9V or 12V AC adaptor,

use with other AC adaptor could damage the unit.

5.2 Connexion using the Adapter

for the Vehicle Cigarette Lighter

The 12 V cigarette lighter adapter is used for motor

vehicles that have a 12 V power supply with negative

earth.

Cautions:

• Use this unit only with the included 12 V car plug

adaptor, use with other car adaptor could damage

the unit.

• The included 12 V car plug adaptor are for use

with this unit only. Do not use them with other

equipment.

• Tampering with the set while driving a motor

vehicle is forbidden. (See safety instructions.)

• Make sure the unit is fastened correctly to prevent

from falling in the vehicle in the event of an acci-

dent.

• When the inside of the cigarette lighter socket

is dirty with ashes or dust, the plug section may

become hot due to poor contact. Be sure to clean

the cigarette lighter socket before use.

• After use, disconnect the 12 V car plug adaptor

from both the unit and cigarette lighter socket.

5.3 Connecting the External Antenna

Connect the end of the antenna cable supplied to the

antenna socket on the television set.

5.4 Connecting Earphones

Connect the earphone plug to the earphone socket

(

1 or 2) on the television set.

Note:

When the earphones are inserted the sound can only

be heard through the earphones. No sound comes

out of the loudspeakers of the television set.

5.5 Connecting the AV Input / AV Output

Connect the video cable supplied as follows:

1. Connect the 3.5 mm stereo jack plug (1) to the

audio IN/OUT socket (18) on the device.

2. Connect the 3.5 mm jack plug (2) to the VIDEO

IN/OUT socket (19) on the device.

3. Now connect the yellow (video), the red (audio

right) and the white (audio left) cinch plug to the

external device that you would like to connect (e.g.

VCR).

• AV IN/OUT Switch Positions

IN: In order to play back the picture from the

external device on the LCD monitor.

OUT: In order to record the current channel of

the LCD device with the external device.

Basic Operation of the Television Set

1. Connect the set to the power supply and turn the

mains switch on the left-hand side of the set to

ON.

2. Connect the antenna.

3. Select the desired channel with the channel selec-

tion buttons ̆ / ̄.

4. Adjust the volume of the television signal with the

̈ / ̇ buttons.

5.6 Charge the battery on/off (during operating)

Press the MODE button ﬁ ve times to adjust the char-

ge function (during operating) of the battery. With the

VOL+/VOL- buttons you carry out the adjustment.

Note:

• If the device is switched off, the battery pack is

charged permanently.

• If the battery pack is completely charged the BAT-

TERY control lamp change from red to green.

05-CTV 719 LCD_GB Neu2 25 20.02.2006, 9:58:34 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clatronic CTV 719 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info