382299

Clatronic dr 2930 Seite 26

26
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
ENGLISH
26
Initial Operation
Filling up the Heating Boiler before Use!
CAUTION:
• Before the tank lock is opened the power plug must
be removed from the socket. Please make sure the
device is depressurized by pressing the steam switch.
• Before unscrewing the lock (3) proceed as follows:
1. Remove the power plug from the socket.
2. Release the pressure by using the steam switch (4).
3. If the device is still warm, please wait 5 minutes before
removing the seal completely. Press the seal downwards
and turn.
WARNING:
• Danger of Injury!
• Please open the safety lock (3) only when no more
steam comes out of the nozzle.
4. Shake any residual water out of the kettle (1). Then fi ll the
measuring beaker (8) and pour the water into the kettle. Use
a funnel if necessary. Re-fasten the safety lock (3).
Attachment of the Individual Accessories
Brush (10) and Angle Attachment (11)
Both attachments can be joined to the nozzle attachment (12)
on the hexagonal section.
Nozzle Attachment, Hose, Cleaning and Non-woven Fabric
Attachment
1. Before attaching the accessories please look at the ope-
nings on the connecting nozzle. The pins on the accessory
must be in line with the openings of the connecting nozzle.
Push the accessory on to the device as far as it will go.
2. Turn the accessory through approximately 90° in a
clockwise direction. The accessory remains locked in this
position.
3. The nozzle attachment can be used on the hose or directly
on the device.
4. The hose (7) must be attached to the connection nozzle (2).
The nozzle attachment and the universal cleaning attach-
ment (13) can be fi xed to the end of the hose. The universal
cleaning attachment should be used either together with
the non-woven fabric attachment (9) or with the window
cleaning attachment (14). The non-woven fabric attachment
is intended for cleaning sensitive surfaces such as sofas
and armchairs.
5. The window cleaning attachment (14) is hooked under the
cleaning attachment (13).
Attachments:
Nozzle attachment: for cleaning crevices, for
example, bathtub edges etc.
Brush attachment: for areas which are diffi cult
to access.
Angle attachment: for areas which are diffi cult
to access, e.g. radiators.
Non-woven fabric attachment: protective non-woven fabric
attachment for sensitive
surfaces.
Window cleaning attachment: for window cleaning, shower
cabinets etc.
Universal cleaning attachment: for larger surfaces such as
glass panes or tiles.
Switching on the Device
• Before inserting the mains lead into the socket, check
whether the voltage you intend to use complies with that of
the machine. For details see the machine label.
• Only connect the machine to a properly installed safety
socket, 230 V/50 Hz.
• After about 3-4 minutes the pressure in the boiler has built
up. Please press the steam switch (4) to produce steam.
Filling up the Water Boiler when using the Device
If there is no more water in the vessel no steam is emitted when
the steam switch (4) is pressed. The water has to be fi lled up
as follows:
1. Pull the power plug out of the socket!
2. Wait for approximately 5 minutes and release the resi-
dual pressure with the steam switch!
3.
WARNING:
Unscrew the safety lock (3) slowly and wait for a few
seconds before opening it completely until the excess
pressure has escaped.
4. Fill fresh water from the measuring beaker (8) by means of
the funnel into the boiler. Do not overfi ll! Do not exceed the
amount of water indicated on the measuring beaker! Take
care of water splashes that might come out of the boiler. In
order to prevent the water from splashing it should be fi lled
into the funnel slowly after the safety lock has been opened.
5. Fasten the safety lock again.
6. Insert the power plug back into the socket.
Cleaning and Maintenance
WARNING:
Cleaning and maintenance must only be carried out when the
power plug is removed from the socket.
• Before putting the device away or cleaning it, it has to be
allowed to cool down completely.
• Please clean the device and the accessories only with a
slightly moist cloth.
• Do not use strong cleaning agents of solvents for cleaning.
• In order to guarantee a long and trouble-free working life,
lime residues have to be rinsed out of the boiler once a
month. Please do not use vinegar or other anti-liming
agents.
05-DR 2930 NEU.indd 2605-DR 2930 NEU.indd 26 25.02.2009 16:19:53 Uhr25.02.2009 16:19:53 Uhr
… 26 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

clatronic-dr-2930

Suche zurücksetzen

  • Der Schraubverschluß zum Befüllen läßt sich leider nicht mehr öffnen Eingereicht am 9-8-2017 16:40

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clatronic dr 2930 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info